Component Hardware KN87-8205-CE User Manual

PREMIUM PLUMBING PRODUCTS

®

Encore Self-Closing Metering Faucets

•Reliable: Oil-lled, adjustable needle valve timing mechanism

is sealed and will not clog due to sediment in water, which can
cause a valve to operate erratically. The oil also self-lubricates
passages and moving parts and is thicker than water, providing
for a slower closing ow.

•Consistency of timing is far superior to water-lled valves: +/- 1.0

seconds tolerance on timing repeatability

•Adjustable: Timing can be set between 1 sec – 3 minutes de

pending on water pressure

•Operates with water pressures from 20-120 psi

•ADA Compliant

•CSA B125/ASME A112.18.1-05 compliant

•Use with 0.5 gpm PCA aerator for maximum water conservation

KN83 Series

KN84 Series KN87 Series

1. Loosen Set Screw with
2mm Hex Wrench

2. Remove Handle

3. Use a Flat Blade Screwdriver
to Make Timing Adjustment

4. Turn Screw Clockwise
Looking From Above
For Longest Time “On”*

*This closes the needle valve and restricts

the ow of uid that holds the valve open

4” (102mm) Centerset with Rigid

Gooseneck Spout and Metering Handles

Model Spout

KN83-4200-RA 3” (76mm)

KN83-4202-RA 6” (152mm)

KN83-4201-RA 8” (203mm)

4” (102mm) Centerset with

Cast Spout and Metering Handles

Model Spout

KN83-4204-CA 4” (102mm)

®

8” (203mm) Widespread with Rigid

Gooseneck Spout and Metering Handles

Model Spout

KN84-8200-RA 3” (76mm)

KN84-8200-RA 3” (203mm)

KN84-8201-RA 8” (203mm)

8” (203mm) Widespread with

Cast Spout and Metering Handles

Model Spout

KN84-8205-CA 5” (127mm)

Angled Metering Valve with Metering Handle

Model Valves

KN87-8205-CE Cold

KN87-8205-HE Hot

KN87-8205-UE Universal

Single Post Basin Tap and Metering Handle

Model Valves

KN87-9205-CE Cold

KN87-9205-HE Hot

KN87-9205-UE Universal

1890 Swarthmore Avenue • Lakewood • NJ 08701 • Tel. [phone] • 732-363-4700 • Fax [phone]

www.encoreplumbing.com

© Copyright 2012, Component Hardware Group, Inc. FLY- ENC-METR 03/2012