Component Hardware KN85-4004-CB2, KN85-4004-CE2 User Manual

SPECIFIER ITEM NO. ________________

®

1-1/2”

(38mm)

4"

(102mm)

1"

(25mm)

4"

(102mm)

3-3/4”

(95mm)

CHG PART NO. _______________________

Encore® Deck Mount 4” Centerset Cast Spout Faucet
with Pop-Up Hole and Cross Handle

KN85 - 4__04 - C__2

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass centerset faucet body with
integral inlet on 4” (102mm) centers, pop-up hole, 1/4 turn
compression or ceramic cartridge valves with SANIGUARD®
treated cross handles and integral 4” cast spout. Accomodates

®

1-1/4” (32mm) pop-up drain.

CUS

NSF 61/9

UP CODE

ADA

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Grade Polished Chrome Plated Cast Brass
1/2” NPSM Male Inlets w/Compression Fittings
Operating Temperature: 40-180°F
Operating Pressure: 15-125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

Part Numbers:

Valves

1/4 Turn Compression Cartridge w/Check 0
1/4 Turn Ceramic Cartridge w/Check 1

KN85 - 4__04 - C__2

Outlet

A 0.5 GPM PCA Spray, Vandal Resistant
B 1.5 GPM Max Laminar Vandal Resistant
C 0.5 GPM PCA Spray
D 1.5 GPM Max Laminar
E 2.2 GPM Max Aerator
F 2.2 GPM Max Aerator, Vandal Resistant

1890 Swarthmore Avenue, PO Box 2020, Lakewood,New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com

®

Item # Description Model #

1

4

5

3

2

1 Faucet Body Ass’y
2 Hot Valve Ass’y
Hot Compression Valve KN50-Y007
Hot Ceramic Valve KN50-Y007-CCV
3 Cold Valve Ass’y
Cold Compression Valve KN50-Y006
Cold Ceramic Valve KN50-Y006-CCV
4 Handle Replacement Kit K50-0111
5 Outlet (Refer to options below)

0.5 GPM PCA Spray,
Vandal Resistant KN50-X203-A

0.5 GPM PCA Spray KN50-X121-A

1.5 GPM Laminar
Vandal Resistant KN50-X203-F

1.5 GPM Laminar KN50-X121-F

2.2 GPM Aerator KN50-X121

2.2 GPM Aerator,
Vandal Resistant KN50-X201

1890 Swarthmore Avenue, PO Box 2020, Lakewood,New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com