Component Hardware KN83-4204-CE9 User Manual

SPECIFIER ITEM NO. ________________

®

1-1/2"

(38mm)

4"

(102mm)

1"

(25mm)

4"

(102mm)

4"

1-1/4" DIA. - 1-1/2" DIA.
(32mm) - (38mm)

(102mm)

INSTALLATION REQUIREMENTS

4"

(102mm)

CHG PART NO. _______________________

Encore® 4” Centerset with 4” Cast Spout with Metering
Handles and Tamper Resistant Screws

KN83-4204-CE9

ENGINEERING SPECIFICATION:

Polished chrome-plated brass deck mount faucet with 4” (102mm)
centers, a 4” (102mm) cast brass spout and ADA compliant
metering valves. Valve handles furnished with tamper-resistant
screws and treated with SANIGUARD®. Adjustable cycle time,
preset to 25 seconds at 60 PSI. Faucet aerator is a 2.2 GPM

®

CUS

NSF 61/9

UP CODE

ADA

(8.3L/M) @ 60 PSI aerated stream (complying with ANSI A112.18.1

Standard for ow), mounting hardware and 1/2” (13mm) NPSM

coupling nuts for standard lavatory risers. Base gasket with
sealant recess included. Accommodates installations up to
1” (25mm) thick.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets w/1/2” tube compression seals & nuts
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com