Component Hardware KN70-9118-DP1 User Manual

SPECIFIER ITEM NO. ________________

®

THE POWER OF SIL V ER

12"

(305mm)

6"

(152mm)

2-5/8"

(67mm)

1"

(25mm)

1-3/16"

(30mm)

5-1/2"

(140mm)

3-3/8"

(86mm)

CHG PART NO. _______________________

Encore® Two Handle Wall Mount Pot Filler, Cast Spouts 18” Reach
and SANIGUARD

®

Lever Handles

KN70 - 9118 - DP1

ENGINEERING SPECIFICATION:

Polished chrome plated cast brass body wall mounted faucet. Quarter turn
ceramic disc cartridges with in-line check valves, 18” double O-ring cast
straight swing spout and extension. Unit is furnished with a polished chrome

plated cast brass pot ller valve, where valve and handle is adjustable up to

®

CUS

NSF 61/9

UP CODE

ADA

180° (left or right). Lever handles are treated with SANIGUARD®. Single
hole wall mounted faucet mounting hardware includes ½” NPSM male
inlets, base gasket with sealant recess and accommodates installations up
to 1” (25mm) thick.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade Gaskets and Seals Rated

Commercial Hot 180°F
½” NPSM Male Inlet
Operating Temperature Range: 40 - 180°F
Operating Pressure: 15 – 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com