Component Hardware KN53-1000-BR User Manual

PREMIUM PLUMBING PRODUCTS

6

Interlocking Helical Coils of stainless steel outer hose

shroud will not come apart, providing maximum
protection and exibility for the inner hose

®

“The Best Pre-Rinse in the World”*

KN53-1000-BR

Patented Stainless Steel Strain Relief

5

Spring transfers load stress and
distributes it evenly over a wider area

to signicantly improve hose life

Heavy-Duty Ergonomic Gooseneck

4

Spring insures proper hose position

and exibility. Available in chrome

or stainless steel

7

3-Ply Nylon-reinforced Santoprene

Inner Hose provides maximum durability

High Pressure Hydraulic Fittings on

8

hose ends have been pressure tested
to 400 psi.

Embedded Temperature Resistant

9

O-Rings eliminate the need for
washers, increase longevity and
provide a positive, leak-proof seal on
all hose assemblies and spray grips

Cool Grip reduces heat transferred

10

to the hand to maximize comfort

and incorporates SANIGUARD
antimicrobial product protection

®

®

3

Patented Wall Bracket with compression

tting provides quick, easy installation and
360° of support to minimize eld abuse.

The nipple can be cut to accommodate
lengths between 2” and 12”

2

Replaceable Valve Cartridge

prevents cross-ow and back
ow and is interchangeable

with T & S Brass

SANIGUARD® product protected ¼-turn handles inhibit the growth of microorganisms that can cause stains,

1

odor and product deterioration. SANIGUARD product protection is designed to keep the product fresher
and cleaner between normal cleaning routines. It is not a disinfectant and will not protect users or others
against food-borne illness or disease. Always use good hygiene and cleaning practices.

*According to Former President of NAFEM

11

Ergonomic Spray Handle is easier to
use and incorporates SANIGUARD
antimicrobial product protection

12

Non-marring, dish sensitive, impact­resistant bumper provides a positive,
non-leaking seal made from a heat
resistant material that will not fatigue

under extreme operating temperatures

13

Reinforced Thermoplastic Face Plate prevents

exing and pre-mature bumper wear. All pre-rinses

are supplied with three spray faces: a 3.3 gpm @60
psi Full Spray, 1.6 gpm @ 60 psi Water Saver Spray
and a 1.2 gpm @ 60 psi Lo-Flow Energy Saver Spray,

which is certied to ASTM F2324-03 in accordance

with the Energy Policy Act of 2005

®

1890 Swarthmore Avenue • Lakewood • NJ 08701 • Tel. [phone] • 732-363-4700 • Fax [phone]

www.encoreplumbing.com

© Copyright 2012, Component Hardware Group, Inc. FLY-ENC-KN53 03/2012