Component Hardware KN50-0220 Specifications

SPECIFIER ITEM NO. ________________

®

THE POWER OF SIL V ER

Encore

SANIGUARD

GRIP

R

R

WATER SAVER

Encore

1.2 GPM @ 60 PSI

CHG

10-3/8” (263mm)

3/4”-20” x 3/8”-18NPT
ADAPTER

3/4”-20” x 7/8”-20”

ADAPTER

3/4”-20” THREAD

PRERINSE ASSEMBLY
w/1.2 GPM FACE

Certified to

ANSI/NSF-61

Section 9

®

CHG PART NO. _______________________

Encore® Low Flow (1.2 GPM @ 60 PSI) Pre-Rinse Kit

KN50-0220-12

ENGINEERING SPECIFICATION:

The spray head has a polished chrome plated brass spray body, valve and
nipple. Spray Handle and Grip are treated with SANIGUARD®. Patented Cool
Grip design reduces the heat transferred to the hand from hot water to maxi­mize comfort. Embedded temperature resistant O-Rings eliminate the need
for washers, increase longevity and provide a positive, leak-proof seal on all
hose assemblies and spray grips. The ergonomic spray handle is designed for

®

ease of operation. A non-marring, dish sensitive, impact-resistant bumper pro­vides a positive, non-leaking seal made from a heat resistant material that will
not fatigue under extreme operating temperatures. Reinforced thermoplastic

face plate prevents exing and pre-mature bumper wear. The pre-rinse spray

assembly is supplied with a 1.2 GPM at 60 PSI Low Flow Water Saver Spray,

which is certied to ASTM F2324-03 in accordance with the Energy Policy Act
of 2005. Pre-Rinse Spray Assembly comes complete with adapters to t other

manufacturer’s hoses.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
Operating Temperature: 40 - 180°F
Operating Pressure: 15 - 125psi

Part Numbers:

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.componenthardware.com