Component Hardware KN13-8010 User Manual

®

CUS

NSF 61/9

UP CODE

SPECIFIER ITEM NO. ________________

CHG PART NO. _______________________

Top Line™ Wall Mount Faucet with Swing Spout

KN13-80__ __ Swing Spout Series

ENGINEERING SPECIFICATION:

Wall mounted cast brass body with polished chrome plated

nish and 8” [204mm] center supply inlets. Full turn compression
valves and double O-ring swing spout w/ 2.2 GPM [8.3 L/Min]
aerator full ow stream bubbler included.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade
Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets
Operating Temperature: 40 - 180°F

Operating Pressure: 15 - 125psi

2-3/8”

Spout Length

(60mm)

Dimensions shown in inches (mm) are for reference only and are subject to change.

Part Numbers:

KN13-80__ __

Spouts

6” Spout 06
8” Spout 08
10” Spout 10
12” Spout 12
14” Spout 14
16” Spout 16

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com