Component Hardware K15-4010 Specifications

SPECIFIER ITEM NO. ________________

®

B

C

A

1"

(25mm)

MOUNTING HARDWARE

1/2" NPSM
MALE INLETS

4"

(102mm)

6-1/8"

(155mm)

7/8"

(22mm)

K15-4014 14” (356mm) 6-13/16” (174mm) 4-5/8” (117mm)

K15-4012 12” (305mm) 6-3/8” (162mm) 4-1/8” (105mm)

K15-4006 6” (152mm) 5” (127mm) 2-3/4” (70mm)

K15-4010 10” (254mm) 5-15/16” (150mm) 3-11/16” (94mm)

K15-4008 8” (203mm) 5-7/16” (139mm) 3-1/4” (82mm)

A B C

CHG PART NO. _______________________

Top Line™ Wall or Back Splash Mount Faucet
with Swing Spout

K15 Swing Spout Series

ENGINEERING SPECIFICATION:

Wall or back splash mounted cast brass body with polished chrome
plated escutcheon and 4” [102mm] center supply inlets. ¼ turn
compression valves and double O-ring swing spout w/ 2.2 GPM

[8.3 L/Min] aerator full ow stream bubbler included. 1” [25mm]

long shanks with mounting hardware supplied.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets
Operating Temperature: 40 - 180°F

Operating Pressure: 15 - 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com