Component Hardware K15-4000 Specifications

SPECIFIER ITEM NO. ________________

®

1"

(25mm)

MOUNTING HARDWARE

1/2" NPSM
MALE INLETS

4"

(102mm)

6-1/8"

(155mm)

7/8"

(22mm)

K15-4000 3-1/2” (90mm) 8-1/4” (210mm) 5-1/2” (140mm)

K15-4002 6” (150mm) 9-1/4” (235mm) 5-1/4” (130mm)

K15-4001 8-1/2” (215mm) 12” (300mm) 6-1/2” (165mm)

A B C

A

B

C

CHG PART NO. _______________________

Top Line™ Wall or Back Splash Mount Faucet
with Swivel Gooseneck Spout

K15 Gooseneck Spout Series

ENGINEERING SPECIFICATION:

Wall or back splash mounted cast brass body with polished chrome
plated escutcheon and 4” (102mm) center supply inlets. ¼ turn
compression valves and double O-ring swivel gooseneck spout

w/ 2.2 GPM (8.3 L/Min) aerator full ow stream bubbler included.

1” (25mm) long shanks with mounting hardware supplied.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Commercial Specication Grade

Gaskets and Seals Rated Commercial Hot 180°F
1/2” NPS Male Inlets
Operating Temperature: 40 - 180°F

Operating Pressure: 15 - 125psi

Dimensions shown in inches (mm) are for reference only and are subject to change.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com