Component Hardware E38-410541 User Manual

PREMIUM PLUMBING PRODUCTS

®

STAINLESS STEEL SINK STRAINER

MODEL NO. E38-410541

Safe, Rolled Edge, Positive Seal Crumb Cup Design.

PATENTED 2-Step Strainer crumb cup closure.

Step 1 – From a sealed position, pull up slightly to allow draining

of water & collection of debris. Crumb cup remains aligned in the
unit & just needs to be pushed to stop draining.

Step 2 – Pull up further to remove crumb cup to clean.

High Grade stainless steel body with galvanized, under sink
locking shell and trivalent coated zinc nuts all manufactured from
U.S.A. made materials.

INSTALLATION:

Place seal washer in recess of sink.
Insert sink strainer body in sink and
assemble thick washer, housing and locknut
from under sink. No other materials required.

®

C US

ASME A112/CSA B125 CERTIFIED

®

Component Hardware

1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 • Tel. [phone] • 732-363-4700 • Fax [phone]

www.encoreplumbing.com

© Copyright 2012, Component Hardware Group, Inc. FLY-ENC-E38 03/2012