Component Hardware D83-4152-9T User Manual

17 GA

CHG

1-1/4” [32mm]

1-1/2” [38mm]

5”[127.4]

3-1/4” [79.5]

11”[282.1]

2-1/4” [57mm]

ENGINEERING SPECIFICATION:

Drain shall be a chrome plated, polished cast brass grid
strainer body with offset tailpiece. Outlet shall be a 17
gauge, 1-1/4” OD seamless tubular tailpiece, polished &
chrome plated. A mounting hardware kit consisting of a
rubber basin seal, friction washer & brass locknut must
be included. The length shall be 11” from the underside
of the flange to bottom of tailpiece. The offset shall be
5” from the centerline of the drain to the centerline of
the tailpiece. Saniguard

®

product protection.

ITEM NO:

MODEL:

D83-4152-9T

PRODUCT NAME:

Grid Drain – 1-1/2” chrome plated w/offset tailpiece

TECHNICAL/PERFORMANCE
SPECIFICATIONS:

1 1/2” drain body w/overflow cavity
Maximum open strainer area allowable

COMPLIES WITH:

ASME A112.18.1-2005/CSA
B125.2-05
ANSI A117.1

1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701, Phone: [phone], Fax. [phone]

www.chgusa.com

11/08