Component Hardware A46-4 User Manual

LEG ASSEMBLIES ORDER FORM

®

STAINLESS STEEL

1-5/8” (41mm) & 2” (50mm) O.D.

LEG ASSEMBLIES

FOR CUSTOM APPLICATION

• ALL LENGTHS FROM 4” (100mm) to 36” (900mm)

• CHOOSE FROM ARRAY OF OPTIONAL TOPS AND ADJUSTABLE TOES

• PERMITS KD SHIPMENT

SPECIFICATIONS

MATERIAL: 16 GA. (1.5 mm) 300 SERIES STAINLESS STEEL TUBING
FINISH: #4 SATIN FINISH STANDARD
TOE ADJUSTMENT: 1-1/2” (40mm) MINIMUM
MOUNTING PLATES: 11 GA. (3mm) PLATED STEEL, 3-1/2” (89mm) SQUARE

WITH (4) 5/16” (8mm) DIA. HOLES SPACED ON 2-5/8” (66mm) CENTERS

STATIC LOAD RATING: 2,000 LBS. PER LEG

STANDARD PACKAGING...25 PER CARTON

ALL LEGS MAY BE FURNISHED PACKAGED IN SETS OF FOUR,

IDENTIFIED WITH CUSTOMER PART NUMBER, ETC.

ORDERING INFORMATION FOR 1-5/8” (41mm) & 2” (50mm) O.D. LEG ASSEMBLIES

FOR 1-5/8” (41 mm) O.D. LEG ASSEMBLIES USE PREFIX...A46 THRU A50 (SHOWN SHADED YELLOW ON CHART).

FOR 2” (50 mm) O.D. LEG ASSEMBLIES USE PREFIX...A52 THRU A56.

CUSTOM LEG TOPS AVAILABLE

NON-STOCK ITEMS

OPTIONAL TOES

AVAILABLE

FLANGED

NO HOLES

FLANGED

WITH HOLES

S/S/ HEX

S/S ROUND

PLAIN WELDED PLATE

REMOVABLE

PLATE

FLUSH

1/2-13 STUD

PROTRUDING

A46-3___ A47-3___ A48-3___ A49-3___ A50-3___

A52-3___ A53-3___ A54-3___ A55-3___ A56-3___

A46-4___ A47-4___ A48-4___ A49-4___ A50-4___

A52-4___ A53-4___ A54-4___ A55-4___ A56-4___

A46-5___ A47-5___ A48-5___ A49-5___ A50-5___

A52-5___ A53-5___ A54-5___ A55-5___ A56-5___

A46-6___ A47-6___ A48-6___ A49-6___ A50-6___

ROUND FOOT INSERTS NOT AVAILABLE FOR 2”(500mm) DIA. LEG ASSEMBLIES

TO ORDER: SIMPLY SPECIFY LEG TOP AND ADJUSTABLE TOE DESIRED TOGETHER WITH THE LENGTH IN INCHES (millimeters) REQUIRED.
EXAMPLE: 1-5/8”(41mm) O.D. WITH PLAIN TOP...SPECIFY A46 NYLON TIP...SPECIFY -2 24”(600mm) LENGTH...SPECIFY 24”(600mm).

THE PART NUMBERS IN THE CHART PROVIDE BLANKS TO ACCOMMODATE ANY LENGTH OF LEG BETWEEN 4”(100mm) AND 36”(914mm)

IN 1/8” (3mm) INCREMENTS. COMPONENT HARDWARE WILL USE THESE BLANKS TO CONVERT YOUR INDIVIDUAL DESIGN

AND LENGTH REQUIREMENT INTO ITS OWN PART NUMBER.

1/2-13 STUD

Component Hardware Group, Inc.

1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 • Tel. [phone] • 732-363-4700 • Fax [phone]

www.componenthardware.com