Complete Control MX-450 Archiver Instruction Manual

MX-450 Archiver

Instruction Manual

COMP L ETE

™

Univ ersal Remote Control

®

CONTROL

COMP L ETE

MX-450 Archiver Instruction Manual © 2008 Universal Remote Control,
Inc.

The information in this manual is copyright protected. No part of this manual
may be copied or reproduced in any form without prior written consent from
Universal Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERA­TIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS
MANUAL.

The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.

Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of

their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

T

ABLE OF CONTENTS

Introduction 1

Installing the Software 2

Connecting to the MX-450 4

Uploading a Configuration from the Remote to the PC 5

Downloading a Configuration from the PC to the Remote 6

Utilizing Live Update 8

Warranty 9

Specifications 9

Page 1

MX-450 A

RCHIVER

Introduction

Thank you for purchasing the Complete Control MX-450 Archiver. The
MX-450 Archiver does not enable you to make any changes to an MX­450 configuration via the PC. All programming is done on the remote
control.

The MX-450 Archiver is designed to enable the professional installer to
archive configurations programmed on either the MX-450 remote control
so that the configurations can be reused in the future without repeating
the programming process. Downloading a previously programmed con­figuration often provides a better starting point for programming and
speeds customization even if the new system is slightly different from
an archived file.

The MX-450 Archiver also enables you to update the IR Database in the
remote control and to update the operating system of the remote control
itself whenever an improvement is available. By connecting to the inter­net, then using the Live Update feature, you can update the control
itself.