Quick Install Guide
16-Port 10/100Mbps Ethernet Web Smart Switch
with 8-Port PoE
SPE1016E8
Contents
1: Introduction ..................................................................................1
Features................................................................................................... 1
Packaging Content............................................................................... 2
2: Let’s Get Going-Hardware Setup ...............................................3
Installation ............................................................................................... 3
Rack Mounting......................................................................................... 4
Connecting Network Cable...................................................................... 5
AC Power................................................................................................. 5
3: Accessing to web-based interface ...........................................6
4: Panel Views and Descriptions.....................................................8
Front Panel............................................................................................... 8
Rear Panel ............................................................................................... 9
5: Technical Specifications ...........................................................10
Warranty Registration Card..............................................................26
1
1: Introduction
This chapter describes the features of the 16-Port 10/100Mbps Ethernet Web
Smart Switch with 8-Port PoE.
Features
16×10/100Mbps Auto-negotiation Fast Ethernet RJ45 ports with 8-port PoE
function (port-1 ~ port-8)
Compliant with IEEE 802.3af specification
Supports PoE power maximum 15.4W for each PoE ports
Supports PoE Powered Device (PD) classification identify
Each port supports auto MDI/MDIX, so there is no need to use cross-over
cables or an up-link port
Full/half duplex transfer mode for each port
Wire speed reception and transmission
Store-and-Forward switching scheme capability to support rate adaptation
and ensure data integrity
Up to 4K unicast addresses entities per devi ce, self-learning, and table
aging
512KBytes packet buffer
Supports IEEE 802.3x flow control for full-duplex mode ports
Supports Back-pressure flow control for half-duplex mode ports
Supports 802.1Q VLAN
Supports Port based QoS and IEEE 802.1p based QoS
Supports Port based Trunking
Supports Port-mirroring
Supports Port-setting for Speed/Disable, Flow control
Support Port based bandwidth rate control (Ingress rate and Egress rate)
Easy configuration via WEB Browser
Easy setting via Web Management Utility
Standard 19” Rack-mount size
2
Packaging Content
Open the shipping cartons of the Switch and carefully unpacks its contents.
The carton should contain the following items:
One 16-Port 10/100Mbps Ethernet Web Smart Switch with 8-Port PoE
One AC power cord, suitable for your area’s electrical power
connections
Four rubber feet to be used for shock cushioning
Screws and two mounting brackets
CD-Rom with Web Management Utility and User’s Guide
If any item is found missing or damaged, please contact your local reseller for
replacement.
3
2: Let’s Get Going-Hardware Setup
This chapter provides installation information for the Switch.
Installation
The site where you install the hub stack may greatly affect its performance.
When installing, consider the following pointers:
Install the Switch in a fairly cool and dry place. See Technical Specifications for
the acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field generators
(such as motors), vibration, dust, and direct exposure to sunlight.
Leave at least 10cm of space at the front and rear of the hub for ventilation.
Install the Switch on a sturdy, level surface that can suppor t its weight, or in an
EIA standard-size equipm ent rack. For information on rack install ation, see the
next section, Rack Mounting.
When installing the Switch on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushi on the hub and protect the hu b
case from scratching.
Loading...