Compaq S 900 User Manual

User's Guide

Compaq S900 Color Monitor

Notice

The information in this guide is subject to change without notice.
COMP AQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR

TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED
HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMA GES
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF
THIS MATERIAL.

This guide contains information protected by copyright. No part of this
guide may be photocopied or reproduced in any form without prior written
consent from Compaq Computer Corporation.

1998 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.

Compaq and Deskpro are registered in the U. S. Patent and Trademark
Office.

Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft
products referenced herein are trademarks or registered trademarks of
Microsoft Corporation.

ENERGY STAR is a U.S. registered mark.
Product names mentioned herein may be trademarks and/or registered

trademarks of their respective companies.
The software described in this guide is furnished under a license agreement

or nondisclosure agreement. The software may be used or copied only in
accordance with the terms of the agreement.

User’s Guide

Compaq S900 Color Monitor

Second Edition (September 1998)
Part Number 360564-002

Compaq Computer Corporation

ENGLISH - TABLE OF CONTENTS

English8188

SAFETY INSTRUCTIONS .................................................................................. 2

INTRODUCTION ................................................................................................ 4

Package Contents ................................................................................. 5

Installing or Removing the Tilt/Swivel Base .......................................5

Feature Highlights .................................................................................6

Maximum Compatibility ................................................................. 6

Latest Screen Technology ..............................................................6

Ergonomics Information ................................................................. 6

Instant Power Saving Solution ....................................................... 6

Recommended Use of the Monitor .......................................................7

Master Power Reset Switch.................................................................. 7

CONTROLS AND ADJUSTMENTS .....................................................................8

Front User Controls. ..............................................................................8

(1) Menu Key.......................................................................................... 9

(2) Contrast/Brightness ...................................................................... 10

Energy Declaration ..............................................................................11

TROUBLESHOOTING .......................................................................................12

TECHNICAL INFORMATION ............................................................................ 13

Specifications ......................................................................................13

Compatibility ....................................................................................... 14

Pin Assignment ............................................................................. 14

Appendix

Agency Regulatory Notices ................................................................... 15

English

English - 1

♦♦♦

SAFETY INSTRUCTIONS

1. Carefully read all of the instructions below and keep the manual for later use.

2. Please install the swivel base onto this product before using it.

3. The voltage ratings and the rated frequency are on the overlay centered at

English

rear side of this product. Do not connect with any source of other voltage or
frequency and please follow all warnings and instructions marked on the
product.

4. Unplug this product from the wall outlet before cleaning and use a damp cloth
to clean it. Do not use liquid cleaners or aerosol cleaners.

5. Do not expose this product to rain or moisture.

6. Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.

7. Do not block or cover ventilating openings with cloth or other material.
Neither should this product be placed near or over a radiator or a heat register,
nor should the product be placed in a built-in installation unless proper
ventilation is provided.

8. This product is equipped with a 3-wire grounding type plug. This plug will only
fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug. Choose a Tandem Blade attachment plug configuration power cord for
230V AC input.

Due to the safety requirements of different areas, please select a suitable
power cord according to the following rules, in addition to the electric rating:

A. Northern America area: Please select a UL listed and CSA certified

power cord.
B. Germany: Please select a VDE certified power cord.
C. Nordic countries: Please select a power cord certified by SEMKO,

NEMKO, DEMKO, or FIMKO.
D. The other areas: Please select a power cord suitable to the local power

system and power outlet.

2 - English

♦♦♦

SAFETY INSTRUCTIONS

Usually a suitable power cord is provided by the manufacturer when this product is
sold. However, this product is sometimes resold or transported to another area with
a different power system and safety requirements; please pay attention to the
selection of a suitable power cord.

The plug on the power cord is intended to serve as the disconnect device;
therefore, the socket-outlet should be installed near the equipment and should be
easily accessible.

9. Do not allow anything to rest on the power cord. Do not locate this product
where people can walk on the cord.

10. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of any kind on the product.

11. Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risk. Refer all servicing
to your Compaq authorized service personnel.

12. Unplug this product from the wall outlet and refer servicing to Compaq
authorized service personnel under the following conditions.

A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.

English8388

English

D. If the product does not operate normally when operating instructions are

followed, adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician

to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a

need for service.

English - 3

♦♦♦

INTRODUCTION

Introduction

The monitor is a multiple frequency high-resolution color monitor for PC-compatible
or Macintosh family and workstation systems. The monitor is equipped with
microprocessor-based intelligence and multiple frequency scanning capability,

English

allowing it to provide maximum compatibility for various system platforms.
The monitor uses the latest screen technology including a 0.22 mm horizontal dot

pitch, High Contrast CRT to display crisp text and vivid color graphics with a
maximum resolution up to 1600 x 1200 pixels. Furthermore, it supports VESA 85Hz
modes to provide a flicker-free display. The full-function digital control and On­Screen Display (OSD) system provide easy adjustment of image geometry and color
settings for different display modes with the precision of a fixed frequency monitor.

The design of the monitor is also ergonomically concerned. In addition to the
friendly controls and user comfort features, the emission level of the electric and
magnetic fields is kept low to meet the Swedish MPR II standards or TCO 95
(optional).

The monitor is also equipped with energy saving functions. It is compatible with the
VESA power saving standards. The lowest power consumption is less than 8 Watts.

4 - English

♦♦♦