Page 1
Memory Modules
Document Part Number: 419585-001
January 2007
This guide explains how to replace and upgrade memory in the
computer.
Page 2
Contents
Adding or replacing memory modules
Adding a memory module to the expansion
memory module slot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Upgrading a memory module in the primary
memory module slot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Index
Memory Modules ii
Page 3
Å
Adding or replacing
memory modules
The computer has 2 memory module compartments. The primary
memory module compartment is located under the keyboard. The
expansion memory module compartment is located on the bottom
of the computer.
The memory capacity of the computer can be upgraded by adding
a memory module to the vacant expansion memory module slot
or by upgrading the existing memory module in the primary
memory module slot.
WARNING: To reduce the risk of electric shock and damage to the
equipment, unplug the power cord and remove all batteries before
installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic
Ä
✎
Memory Modules 1
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object.
Your computer may look slightly different from the
illustrations in this section.
Page 4
Adding or replacing memory modules
Adding a memory module to the
expansion memory module slot
To add or replace a memory module in the expansion memory
module slot:
1. Save your work and close all open programs.
Be sure that the computer is not in Hibernation. If you are
✎
not sure whether the computer is off or in Hibernation, turn
the computer on by pressing the power button. Then shut
down the computer through the operating system.
2. Click Start, click the arrow next to the Lock button, and then
click Shut Down.
3. Close the display.
4. Disconnect all external devices connected to the computer.
5. Unplug the power cord.
6. Turn the computer upside down on a flat surface.
7. Remove the battery from the computer.
2Memory Modules
Page 5
Adding or replacing memory modules
8. Loosen the 3 memory module compartment cover screws 1.
9. Lift the memory module compartment cover 2 away from
the computer.
Memory Modules 3
Page 6
Adding or replacing memory modules
10. To remove a memory module:
a. Pull away the retention clips 1 on each side of the
memory module.
The memory module tilts up.
b. Grasp the edges of the memory module 2 and gently pull
the module out of the memory module slot.
To protect a memory module after removal, place it in an
electrostatic-safe container.
4Memory Modules
Page 7
Adding or replacing memory modules
11. To insert a memory module:
a. Align the notched edge 1 of the memory module with
the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the
surface of the memory module compartment, press the
module 2 into the memory module slot until it is seated.
c. Press the memory module down 3 until the retention clips
snap into place.
Memory Modules 5
Page 8
Adding or replacing memory modules
12. Align the tabs 1 on the memory module compartment cover
with the notches on the computer.
13. Close the memory module compartment cover 2.
14. Tighten the 3 memory module compartment cover screws 3.
15. Replace the battery.
16. Reconnect external power and external devices.
17. Turn on the computer.
If the computer displays a message indicating that the size or
configuration of the memory has changed, press
f1 to save the
changes.
6Memory Modules
Page 9
Adding or replacing memory modules
Upgrading a memory module in the
primary memory module slot
To upgrade a memory module in the primary memory
module slot:
1. Save your work and close all open programs.
If the computer is in the Sleep state or in Hibernation, you
✎
must first exit Sleep or Hibernation before shutdown is
possible.
2. Click Start, click the arrow next to the Lock button, and then
click Shut Down.
3. Close the display.
4. Disconnect all external devices connected to the computer.
5. Disconnect the power cord.
6. Turn the computer upside down on a flat surface.
7. Remove the battery from the computer.
Memory Modules 7
Page 10
Adding or replacing memory modules
8. Remove the 4 keyboard screws.
9. Turn the computer over and open it.
10. Gently lift the top edge of the keyboard and tilt the keyboard
over until it rests on the palm rest of the computer.
8Memory Modules
Page 11
Adding or replacing memory modules
11. Remove the memory module from the memory module slot:
a. Pull away the retention clips 1 on each side of the
memory module.
The memory module tilts up.
b. Grasp the edge of the memory module 2 and gently pull
the module out of the memory module slot.
To protect a memory module after removal, place it in an
electrostatic-safe container.
Memory Modules 9
Page 12
Adding or replacing memory modules
12. To insert a memory module:
a. Align the notched edge 1 of the memory module with
the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the
surface of the memory module compartment, press the
module 2 into the memory module slot until it is seated.
c. Press the memory module down until the retention clips 3
snap into place.
10 Memory Modules
Page 13
Adding or replacing memory modules
13. Return the keyboard to its previous position and close it.
14. Turn the computer upside down.
15. Replace the 4 keyboard access screws.
Memory Modules 11
Page 14
Adding or replacing memory modules
16. Replace the battery.
17. Reconnect external power and external devices.
18. Turn on the computer.
If the computer displays a message indicating that the size or
configuration of the memory has changed, press
changes.
f1 to save the
12 Memory Modules
Page 15
C
compartment, memory module
1
E
electrostatic discharge (ESD)
1
ESD (electrostatic discharge)
1
M
memory module compartment
1
memory module compartment,
expansion
memory module, removing or
inserting
2
2
Index
Memory Modules Index–1
Page 16
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Memory Modules
First Edition: January 2007
Document Part Number: 419585-001
Loading...