Compaq 400000 User Manual

Using the Wedge

Attaching the Wedge to Your Computer

To attach the Wedge to your computer, complete the following steps:

1. Line up your computer with the alignment hooks on the Wedge.

2. Pivot your computer down and press it firmly into place on the Wedge.

Your computer will snap into place.

Attaching the Wedge

Detaching the Wedge from Your Computer

Before detaching the Wedge from your computer, you must first shut down
the computer, using one of the following methods:

• Turn off the computer using the standard Windows shutdown method.

• Press the Power

• Click the Start button on the Windows taskbar, then click Eject PC.

When the computer has shut down, detach the computer from the Wedge by
completing the following steps:

1. Press in the Wedge Release button located on the sides of the Wedge.

2. Lift your computer up and toward you.

¹ button to initiate Hibernation mode.

Detaching the Wedge