Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server, 258124-001 - StorageWorks NAS B3000 Model C900s Server, StorageWorks NAS B3000 Quick Reference Manual
StorageWorks by Compaq
Quick Reference
This poster provides the following installation and
configuration information:
n
Power-down procedure
n
Power-up procedure
n
Drive configuration
n
LED labeling
n
Rear panel connectors and components
n
Ethernet connectors
n
Where to find additional information
Thank you for purchasing
your new
StorageWorks
NAS B3000 by Compaq.
The NAS B3000 comes with all
device, storage, and software
components needed for immediate
deployment into the workplace. It
is optimized for managing file
services and data storage to a
variety of clients and devices
running different operating
systems. The NAS B3000 is
designed for customers who have
rapidly growing storage needs and
are looking for ways to simplify
administration and improve
performance and reliability in a
multiprotocol file-serving
environment.
© 2002 Compaq Computer Corporation. Compaq,
the Compaq logo, and StorageWorks are trademarks
of Compaq Information Technologies Group, L.P.
All other product names mentioned herein may be
trademarks of their respective companies.
Compaq shall not be liable for technical or editorial
errors or omissions contained herein. The
information in this document is provided “as is”
without warranty of any kind and is subject to
change without notice. The warranties for Compaq
products are set forth in the express limited
warranty statements accompanying such products.
Nothing herein should be construed as constituting
an additional warranty.
Printed in the U.S.A.
STORAGEWORKS NAS B3000 BY COMPAQ QUICK
REFERENCE
First Edition (February 2002)
Part Number 259120-001)
TM
Power-Down Procedure
Follow the steps below to power down the NAS B3000:
CAUTION: To reduce the risk of system and data corruption:
n
Use the steps in the “Device Power-Down Procedure” when you power down
the device.
n
Do not press the Power On/Standby switch to power down.
n
Do not disconnect the power cord from the storage enclosure while the device
is running.
n
If a corruption occurs, you must reinitialize the system, reconfigure the device,
and recover data from backups.
1. Close all programs that are running on the device.
NOTE: When possible, notify file server users in advance that the device will be unavailable, so that users
may have sufficient warning to save their individual files.
2. From the NAS B3000 user interface, select Maintenance, Shutdown.
3. Select Shut Down, OK. The NAS B3000 completes the power-down process
automatically. Several staus messages are displayed during this process.
4. Verify the power button LED is amber.
5. To remove power from the device, disconnect power cords from their power
sources and verify that the power button LED is off.
Power-Up Procedure
To power up the NAS B3000:
1. Verify that all power cords are properly connected.
2. Press the power button and verify that the power button LED is green. The
system is fully powered when the Online configuration utility launches.
259120- 001
Where to Find Additional Information
Document/ Where located Type of information
Resource
Administration Documentation CD in the Detailed administration
guide
Compaq website http://www.compaq.com Compaq electronic
Compaq Insight
Manager
SmartStart
StorageWorks
TechNotes Compaq website: Integration of the operating
Technical support 1. Call 1-800-OK-COMPAQ* 1. Technical support in the
Troubleshooting Administration guide or Detailed troubleshooting
White papers Compaq website: Variety of technical
TM
TM
website http://www.compaq.com/ Additional
StorageWorks
package information
Management CD in the Tools to monitor and manage
StorageWorks
media package B3000
SmartStart Support and Utilities, diagnostics,
Software CD and maintenance for the
Setup media and troubleshooting
information
Setup and the
StorageWorks
StorageWorks
NAS B3000
NAS
StorageWorks
storageworks information
http://www.compaq.com system with the
NAS B3000
U.S. and Canada
2. Compaq website: 2. Technical support outside
http://www.compaq.com the U.S. and Canada
maintenance and service guide information
http://www.compaq.com topics
StorageWorks
*For continuous quality improvement, calls may be monitored or recorded.
Symbols on Equipment
Read the “About This Guide” chapter in the StorageWorks NAS B3000 by Compaq
Quick Start Guide for definitions of these safety warning symbols.
NIC LED LABELING
Device RJ-45 LED Indicators
Device RJ-45 LED Indicators
NIC link status
NIC activity
Description
2
1
Indicator
654321
1
2
3
654321
NIC link status
NIC activity
Description
2
1
Indicator
1 2
1
DRIVE CONFIGURATION
Device Drive Configuration
Indicator Description
31 2
36.4 GB
Ultra3 HD
36.4 GB
Ultra3 HD
4
Storage Enclosure Drive Configuration
Occupied with 36.4-GB
4
hot-plug hard drives
Drive bay blanks
3
(bays not availble)
Diskette drive
2
IDE CD-ROM drive
1
3
4
1 3 5 97 11 13
2 4 6 8 10 12 14
Storage Enclosure Drive Bay Configuration
2 3 4 5 6 7 8 9 10 11 12 13 14
1
Bay
012 34589101112131415
SCSI ID
Note: Compaq Utilities report drive state through the SCSI ID. This table assists you in associating the
appropriate drive bay to the corresponding SCSI ID.
Hard Drive LED Status Indicators
3
2
1
Indicator Description
Drive activity
1
2
Online
3
Drive failure
FRONT LED LABELING
2
Power Switch LED Indicator
1 2 3 4
Device Front LED Indicators
36.4 GB
Ultra3 HD
36.4 GB
Ultra3 HD
Indicator Description
Power On Switch
1
2
Power/Interlock LED
Memory/Processor
3
LED
Fan LED
4
Condition Status
Server is powered up
Green
Server is powered
OFF
down
2
5
6
7
1
Storage Enclosure Front LED Indicators
5 6 7
Indicator Description
5
Heartbeat
6
Power activity
Failure indicator
7
DEVICE REAR PANEL CONNECTORS
4
1 2 3
654 321
STORAGE ENCLOSURE REAR PANEL COMPONENTS
7
1
4578910111213 6
Components
Identifier Description
1
Auxilliary serial knockout
2
External SCSI connector
3
PCI Hot-plug expansion board slots (4)
Non-hot-plug PCI expansion slots (2)
4
5
Quad NIC
Host bus adapters (HBAs)
6
7
Remote insight board (RIB)
8
Mouse connector
9
Hot-Plug keyboard connector
Serial connector A
10
11
Primary hot-plug power cord connector
12
Redundant hot-plug power cord connector
13
VHDC SCSI knockouts
Note: The StorageWorks NAS B3000 includes five loopback cables for Ethernet port
termination. A loopback cable should be connected to any server Ethernet port that is not
configured for use. Loopback cables are not provided for the RIB or the storage enclosure,
and should not be connected to the Ethernet connectors on the RIB or the storage enclosure.
REAR LED LABELING
5
PCI Hot Plug LEDs
Indicator Description
1
2
Power LED
1
Activity LED
2
1 2
Identifier Description
1
2
3
4
5
NOTE: Some components are optional. The model you purchased
may or may not contain all components illustrated.
Storage Enclosure
SCSI BUS LED Indicators
Indicator
Indicator
3
1
2
Components
Fabric Switch 6
Blower attached to Hot-plug power supply
Blower attached to Hot-plug power supply
SCSI connector
I/O Module/Environment Monitoring Unit (EMU)
Description
SCSI bus terminator
status
SCSI bus power
or locate
2345
6
Ethernet Connectors
Eth 2
654321
RIB Eth
Eth 0
Eth 3
Eth 1
3
Power supply
Loading...