COMPANION Rhino Compact 320 Swag Instruction Manual

COMPACT 320 SWAG

INSTRUCTION MANUAL

Part No. 777012

IMPORTANT

Read these instructions for use
carefully. Familiarise yourself with
the product before use. Keep these
instructions for future reference.

companionleisure.com.au

PARTS LIST:

QTY DESCRIPTION

1 x Swag with built-in mattress
9 x Steel Pegs
5 x Guy Ropes

BEFORE USE:

• Before using your swag for the rst time, it should be ‘seasoned’ to make it fully
waterproof. This involves erecting the swag (see assembly instructions), soaking it
completely with water by either rain or using a hose and letting the swag dry. It is the
drying process that waterproofs the swag.

• Ensure all aps are closed. This will allow the fabric and stitching to shrink and take up.
Some water may wick through the stitching during this process. If any wicking occurs
in the future, rub the stitching with a wax stick which will seal the area (available at
camping stores).

• Repeat the wetting and drying process 2 or 3 times. The swag should now be
waterproof. Allow swag to dry completely, and clean before rolling and storage.

• Always make sure that your swag is completely dry before packing away.
Any moisture in the fabric will cause it to mildew and dramatically reduce its life.
Mildewed fabric or fabric damaged by mildew is not covered under warranty.

• Never store a wet and/or soiled swag, as mildew and/or corrosion will form within a few
days. This condition is not covered by the warranty.

companionleisure.com.au

SET UP INSTRUCTIONS

STEP 1

Choose a level rm surface, clear of any
overhanging tree branches and clear of
sticks, stones or any other objects that may
damage the oor of your swag.

STEP 2

Undo buckles and roll out the swag.
Make sure all zips are closed to keep the
swag in its correct shape. Pull out the four
corners of the oor rmly and secure using
pegs (1). Make sure all pegs are tted before
continuing.

2

STEP 3

Attach guy ropes (2) to the swag and pull
out by using pegs or tie to the nearest tree if
necessary.

2

2

1

1

1

SPECIFICATIONS

Size 200L x 75W x 30Hcm

Material Heavy duty polycotton ripstop

Fabric Weight 320g/m

Floor 320g/m

2

2

Mattress 50mm HDPE open cell foam

Zipper Heavy duty #10

Weight 5kg

companionleisure.com.au

WARNING

KEEP all ame and heat sources away from swag fabric.
NEVER use any fuel burning/oxygen consuming device, or any device that produces fumes

(including stoves, lanterns, candles or heaters) in or around your swag. Inhalation of fumes
may result in carbon monoxide poisoning, injury or death.

DO NOT:

• DO NOT pitch swag near an open ame.

• DO NOT leave campres unattended.

• DO NOT allow children or adults to use

lighted candles, matches or other ame
sources in or near swags.

• DO NOT use heating, lighting or cooking
equipment with open ames in or near
swags.

• DO NOT use fuel burning/oxygen
consuming devices (i.e. heaters, lanterns,
or other ame sources) inside your swag
at any time.

• DO NOT use water repellant compounds
for swag canvas that are not
recommended specically for this purpose.
Ensure the manufacturer’s instructions
are adhered to at all times.

• DO NOT spray the swag with insecticide.

• DO NOT use this swag as a dwelling.

This swag is designed as a recreational
product only.

DO:

• ALWAYS extinguish campre before
leaving area.

• EXERCISE care when using electricity
and lighting in and near swags.

• DISASSEMBLE and store swag
properly after use to ensure the swag’s
longevity.

• ALWAYS lower awnings to avoid water
ponding on awning during rain.

• ALWAYS roll your swag for transport to
protect it from dust and dirt that may
be the result of travelling on dirt roads.
Consider purchasing a swag carry bag
for additional protection.

CARE

Rhino swags have the nest water repellent
treatment possible for each type of fabric.
No swag, however, can be as waterproof as
a house, car or similar solid structure. There
are several common and natural causes
that can lead to water in your swag.

CONDENSATION

The polycotton canvas fabrics are coated
with acrylic to repel water. This coating
reduces air permeability and leads to
condensation similar to that which occurs
on car windows under certain conditions.
This is caused by lower temperatures on
the outside of the swag combined with
body heat on the inside of the swag.
When this occurs, avoid touching walls to
reduce contact leakage. Leaving the doors
and windows open will reduce moisture
condensation. Some condensation is
normal with polycotton canvas fabrics and
should not be considered as a defect.

SEAM LEAKAGE

Rhino swags are manufactured by expert
machinists with the nest water repellent
treatment. However, when new and during
heavy rain, some seepage may occur
in the seams through the needle holes
created in the sewing process.

This is normal and can be corrected
with the application of a seam sealing
compound available at camping stores.

MILDEW

To avoid mildew, never put your swag away
wet or damp. However, if mildew occurs,
use a soft bristle brush or sponge with
mild detergent to clean. Let the swag dry
in the sunlight and re-apply seam sealer
compound on the inside of the seams.

REPAIRING A TEAR

For small tears, use a self-adhesive patch
kit. We recommend a canvas or awning
repairer for larger tears.

ZIPPER

If the zipper separates, move the slider
to the beginning of the zipper tape and
re-work the zipper. If this does not work, we
recommend you visit a canvas or awning
repairer in your area.

FADING FABRIC

Do not leave your swag set up in direct
sunlight longer than it is necessary. If left
in sunlight for prolonged periods of time,
fabric will fade and weaken.

companionleisure.com.au

FLOOR CONDENSATION

Placing a ground sheet under your swag
prevents the oor from feeling damp and
helps prolong its life. The ground sheet
should be smaller than the swag’s oor to
prevent rain from running under the swag.

REMOVING PEGS

Pegs should be pulled with another peg,
hammer or a peg puller, never by pulling on
the swag. Avoid pegging swag so tight that
it stretches the fabric. Overstretching may
cause peg loops to tear.

CARRY BAG

A carry bag is not included. Sold separately.

WARRANTY

Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or
replaced if goods fail to be of acceptable
quality and the failure does not amount to a
major failure.

For warranty and technical support please
visit www.primusaustralia.com.au
or call 1300 555 197
(Mon-Fri 8:30-5:30 AEST)

For more information contact
Customer Service on 1300 555 197

PRIM US AU STRA LIA P ty Ltd

Distributed by

Bundoora Victoria 3083

companionleisure.com.au

COM4699