Compal Electronics CAX00NFC, CAX00WB User Manual

CAX00 Rugged Tablet
User Manual
TABLE OF CONTENTS
Safety Precautions and Usage Notes .................................................. 2
Regulatory Information .................................................................. 5
Your Tablet ................................................................................ 6
Tablet Overview .......................................................................... 7
Getting Started .......................................................................... 13
Power Indicator ................................................................................................................. 13
Battery Charge Status Indicator ......................................................................................... 14
Operating Your Tablet ................................................................. 17
Battery Removal and Replacement .................................................................................... 23
Specifications ........................................................................... 25
CAX00 Rugged Tablet User Manual

Safety Precautions and Usage Notes

To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety guidelines:
DANGER:
Precautions on the Battery:
Fail to comply with the following precautions may result in electrolyte leakage, generation of heat, ignition or rupture.
Avoid placing the battery in extreme heat (for example near the fire in direct sunlight). DO NOT throw the battery into a fire or expose it to excessive heat.
When the battery has deteriorated, replace it with a new one.
The battery is rechargeable and intended for the specified product. DO NOT use with any
other products.
Use only the specified battery with your tablet. Use of batteries other than those supplied by the manufacturer may present a safety hazard.
WARNING:
If a malfunction or trouble occurs, immediately stop using the product, power off and unplug the AC adapter, and then remove the battery. Then contact technical support for repair.
WARNING: Fail to comply with the following precautions may result in electric shock.
DO NOT pull or insert the power adapter if your hands are wet.
DO NOT connect the power adapter to a power source other than a 100-240 volts AC outlet.
Connecting to a DC/AC converter (inverter) may damage the power adapter.
Plug the power supply completely. DO NOT use a damaged plug or loose AC outlet.
Hold the plug when unplugging the power supply.
WARNING:
DO NOT turn the volume up to loud when using headphones.
DO NOT use this product with exposed in a hot or cold environment for a long period of
time, low-temperature burns or frost-bite may result. When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest amount of time possible.
2
Safety Precautions and Usage Notes
CAUTION:
When using in a hot or cold environment, some peripherals and battery packs may fail to work properly. Check the operation environment of the peripherals before operating the product.
Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments.
When using in low temperature environment, startup may become slow or battery operation time may become short. The tablet consumes power when the flash memory is warming up during startup. Therefore, if you are using battery power and the remaining power is low, the tablet may not start up.
If you cannot power on the tablet, or the tablet does not resume from sleep. Leave it in an environment of 5°C or higher temperature for about an hour, and then power it on again.
DO NOT use this product if connected with the AC adapter or any other cables connected during a thunderstorm.
DO NOT place this product near any magnetic objects.
ESD WARNING:
Electrostatic discharge:
Electrostatic discharge is the sudden flow of electricity between two electrically charged objects caused by contact. The product may be damaged when it comes in contact with your hand or other objects with built-up static electricity.
Please take note of the following items to prevent damaging your product or losing important data:
Please make sure the product is grounded properly when disconnecting the power source.
Before installing a component, please place the component inside an anti-static container.
Avoid touching the product’s pins, leads, or electronic components.
Please use non-magnetic tools when installing a component.
Before handling a component, please touch a conductive metal surface to discharge the
static electricity from your body.
After removing a component, please store the component inside an anti-static container.
3
CAX00 Rugged Tablet User Manual
Camera Notes
The camera's autofocus function may not perform as expected in the following circumstances.
The subject is very dark.
The subject lacks contrast (e.g. the sky, a white wall, etc.) or there is little contrast between
the subject and the surroundings (e.g. the subject is standing in front of a white wall while wearing a white shirt).
Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject and the subject is in deep shadow).
The subject is a flat object with only horizontal lines.
The subject is a fast-moving object.
The scene is poorly lit.
The scene features bright reflections or backlighting.
The scene features flickering objects (e.g. fluorescent lights).
The scene features point light sources (e.g. light bulbs, spotlights, or LEDs).
The scene features several objects that are different distances from the camera.
In these circumstances where the camera is unable to focus, point the camera at another object at the same distance as the camera as the subject, then wait for the camera to focus and take the picture.
4
Regulatory Information

Regulatory Information

CAUTION:
Do not operate this personal computer or handheld computer’s incorporated wireless WAN modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.
CAUTION:
A risk of explosion from incorrect installation or misapplication of the battery or if the battery is replaced by an incorrect type may possibly occur. Dispose of used batteries according to the instructions.
CE Declaration of Conformity (EUROPE only)
The product has been marked with the CE Mark to illustrate its compliance.
The following countries comply with EU R&TTE directive: Austria, Belgium, Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxemburg, Macedonia, Malta, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom.
The following list of territories complies with CE directive:
France: French Polynesia, Guadeloupe, Martinique, Mayotte, Monaco, New Caledonia, Reunion, Saint Martin, Tahiti
Italy: San Marino, Vatican
Netherlands: Curacao, Bonaire, Saba, Saint Maarten, Saint Eustatius
Spain: Andorra
United Kingdom: Cayman Islands, Falklands Islands, Jersey, Gibraltar, Guernsey, Montserrat,
Turk & Caicos, UK Virgin Islands
5
CAX00 Rugged Tablet User Manual
Tablet
Power Adapter
Quick Guide
Power Cord

Your Tablet

Package Contents

Ensure that all of the proper items are included with the tablet in the packaging. The items that should be included in the packaging are:
6
Tablet Overview
Number
Component
1
Front-Facing Camera (2MP)
Captures images and videos.
Senses the ambient light in order to make adjustments to the brightness of the display.
3
Microphone
Captures audio.
4
NFC Sensor (Optional)
Reads NFC devices/contactless smart cards.
5
Fingerprint Reader
Scans the user’s fingerprint.
6
Volume Down/Up Button
Decreases / Increases the volume.
Customizable hotkeys.
system running the Windows OS only.
Displays system status including power, and
behavior, see LED Indicators.

Tablet Overview

Front View

The following illustration shows the front side of the system.
2 Ambient Light Sensor
7
8 Status LEDs
Hotkey A/B
NOTE: The configuring the hotkeys may not be initially installed by the manufacturer and may need to be installed by the user on a
battery/charging status. For more information on LED
Quick Launch Setting
app designed for
7
CAX00 Rugged Tablet User Manual
Number
Component
1
Power Button
Turns the tablet or display on/off.
2
SmartCard Reader (Optional)
Reads SmartCards.
Used to attach a carrying strap to the tablet.
and must be purchased separately by the user.

Right View

The following illustration shows the right side of the system.
3
Strap Loop
NOTE: A carrying strap is not provided by the manufacturer
8
Tablet Overview
Number
Component
Connects to headphones, speakers, microphones and other audio output/input devices.
Connects to video devices such as a display, television, or projector.
3
USB 3.0 Ports
Connects to USB devices.
4
DC-In Port
Connects to the adapter for charging.
Used to attach a carrying strap to the tablet.
and must be purchased separately by the user.

Left View

The following illustration shows the left side of the system.
1 Universal Audio Jack
2 HDMI Port
5
Strap Loop
NOTE: A carrying strap is not provided by the manufacturer
9
Loading...
+ 21 hidden pages