Compal Electronics CAX00NFC User Manual

SM-MMN17-C01

NFC Controller Module with Antenna

Datasheet Version 1.2

Smart Approach Co., Ltd.

Rm. 5, 3F., No.1, Taiyuan 2nd St.,
Zhubei City, Hsinchu County 302,
Taiwan, R.O.C.
[phone]
www.smart-approach.com.tw

SM-MMN17-C01 Datasheet

Smart Approach Co., Ltd ( S.A. ) retains the right to make changes to its products or
specifications to improve performance, reliability or manufacturability. All information in this
document, including descriptions of features, functions, performance, technical specifications
and availability, is subject to change without notice at any time. While the information furnished
herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach
for its use. Furthermore, the information contained herein does not convey to the purchaser of
microelectronic devices any license under license under the patent right of any manufacturer.

Smart Approach Co., Ltd is a registered trademark. All other products or service names used in
this publication are for identification purposes only, and may be trademarks or registered
trademarks of their respective companies. All other trademarks or registered trademarks
mentioned herein are the property of their respective holders.

Feedback on the use of any of the document is welcomed and encouraged by Smart
Approach.

Please contact [e-mail] for your feedback or any ordering

inquiry.

Please contact [e-mail] for any technical question.

This section describes the changes that were implemented in this document. The changes are
listed by revision, starting with the most current publication.

Revision 1.0

Revision 1.0 of this datasheet was published in December 2014. This was the first publication
of the document.

Revision 1.1

Updated chapter 2 features, in April 2016.

Revision 1.2

Updated chapter 7 outline, in October 2016.

-

Revision 1.2 October 2016

2 -

SM-MMN17-C01 Datasheet

REVISION HISTORY ............................................................................................................................. - 2 -

CONTENTS ........................................................................................................................................... - 3 -

FIGURE CONTENTS ............................................................................................................................ - 4 -

TABLE CONTENTS .............................................................................................................................. - 4 -

1 INTRODUCTION .......................................................................................................................... - 5 -

2 PRODUCT OVERVIEW ................................................................................................................ - 6 -

2.1 F

2.2 A

EATURES
PPLICATION

.............................................................................................................................. - 6 -

.......................................................................................................................... - 6 -

3 FUNCTIONAL DESCRIPTIONS .................................................................................................. - 7 -

4 ELECTRICAL SPECIFICATIONS ................................................................................................ - 8 -

4.1 P

4.2 I

4.3 T

IN DESCRIPTION

2

C A

EMPERATURE MAXIMUM RATINGS

4.4 DC

4.5 A

4.6 P

4.7 T

4.8 S

NTENNA SPECIFICATION
OWER CONSUMPTION
HERMAL PROTECTION
YSTEM POWER MOD ES

4.9 R

DDRESS

ELECTRICAL PARAMETERS

ESET AND DOWNLOAD CONCEPT

................................................................................................................... - 8 -

......................................................................................................................... - 9 -

.......................................................................................... - 9 -

.............................................................................................. - 10 -

...................................................................................................... - 10 -

.......................................................................................................... - 11 -

.......................................................................................................... - 11 -

......................................................................................................... - 11 -

.......................................................................................... - 12 -

5 ORDERING INFORMATION ...................................................................................................... - 13 -

6 RELIABILITY VERIFICATION .................................................................................................... - 14 -

7 NFC MODULE OUTLINE ........................................................................................................... - 15 -

-

Revision 1.2 October 2016

3 -

SM-MMN17-C01 Datasheet

Figure 1 Typical Application ................................................................................................. - 6 -

Figure 2 Module Block Diagram ............................................................................... ........ ... - 7 -

Figure 3 Reset via V

pin ................................................................................................. - 12 -

EN

Figure 4 NFC Module Drawing ............................................................................... ........... - 15 -

Figure 5 Module FPC Connection Foot Print ..................................................................... - 16 -

Figure 6 FPC Wire Dimension ........................................................................................... - 16 -

Table 1 Module Pin Description ........................................................................................... - 8 -

Table 2 I

2

C Address ............................................................................................................. - 9 -

Table 3 Temperature Maximum Ratings .............................................................................. - 9 -

Table 4 DC Electrical Specification .................................................................................... - 10 -

Table 5 Antenna Specifications .......................................................................................... - 10 -

Table 6 Current Consumption ............................................................................................ - 11 -

Table 7 Thermal Protection ................................................................................................ - 11 -

Table 8 System Power Modes Description ........................................................................ - 1 1 -

Table 9 Power Mode Configuration ................................................................ .................... - 12 -

Table 10 Reset Timing ....................................................................................................... - 12 -

Table 11 Ordering Information Table .................................................................................. - 13 -

Table 12 Reliability Item Table ........................................................................................... - 14 -

-

Revision 1.2 October 2016

4 -

SM-MMN17-C01 Datasheet

1 Introduction

This document consists of descriptions and specifications for both functional and physical
aspects of the SM-MMN17-C01 NFC reader / writer module.

In addition to the datasheet, Smart Approach maintains and extensive device-specific library of
support and collateral materials that you may find useful in your application. Depending upon
the Smart Approach device, this library may include:

Presentations highlighting the operational features and specifications of the device to

assist in developing your own product road map.

Application notes that provide detailed descriptions of the use of the particular Smart

Approach product to solve real-world problems.

-

Revision 1.2 October 2016

5 -

SM-MMN17-C01 Datasheet

2 Product Overview

SM-MMN17-C01 is full featured NFC controllers designed for integration in portable equipment.
It is optimized for low power consumption w ith fully host controllable power states and for small
footprint for portable equipment applications.

size-sensitive
applications, assures robust performance.
The following illustration shows a high-level, generic view of a SM-MMN17-C01 application.

Figure 1 Typical Application

2.1

Features

This section Tables key aspects of the SM-MMN17-C01 module functionality and design that
distinguish it from similar products:

NXP NPC100
consumption.
Compliant with ISO/IEC 14443 A/B
Compliant with ISO/IEC 15693/18092
Compliant with NFCIP-1, NFCIP-2
Support MIFARE and Felica specifications
Customized antenna pairing
I2C interface

2.2

Application

Suggested applications for the SM-MMN17-C01 module include:

NFC writer/ reader
NFC peer to peer controller
NFC identification

-

Revision 1.2 October 2016

6 -

SM-MMN17-C01 Datasheet

3 Functional Descriptions

This section provides detailed information about how SM-MMN17-C01 module works, what
configurations and operational features are available.
The following illustration shows the primary functional blocks of SM-MMN17-C01 module.

Customized Antenna

Figure 2 Module Block Diagram

Loop Antenna is Smart Approach customize solution. Antenna matching is also a customize
solution. NFC controller includes NXP NPC100 chipset, and has an I
through the connector to mother board.

2

C contro l interface

-

Revision 1.2 October 2016

7 -