The ComNet™ VDSL3 consists of one each 10/100TX 8-por t managed switch, one
each 2-channel EoVDSL uplink modem, and a mounting chassis, to easily and
inexpensively aggregate Ethernet-enabled equipment at remote field locations
back to a central or head-end location over existing copper infrastructure. The
VDSL3 is the perfect solution for upgrading a legacy twisted copper or coaxial cable
plant for use with Ethernet, when compared to the significant costs of installing
new network cabling. Utilizing the latest generation VDSL2 technology for the
fastest data rate and greatest transmission distance, any standard telephone-grade
twisted copper pair, legacy serial cabling, or standard 75Ω coaxial cable may be
used. The easily configured 10/100 Mbps 8-port managed switch accommodates
up to six Ethernet-compatible devices, with the other two ports allocated to the
2-channel EoVDSL uplink modem. The VDSL3 may be deployed in most out-ofplant installations, such as those found in intelligent transportation systems and
factory automation/control applications.
FEATURES
› Designed as a very low-cost and simple to implement
solution for drop-and-repeat Ethernet-over-copper
transmission circuits
› Provides greater flexibility and the same functionality
as drop-and-repeat EoVDSL managed switches costing
considerably more
› Latest generation VDSL2 technology for fastest data rate
and greatest transmission distance
› Modular, Field-Expandable Design: Supports more than
one EoVDSL channel by adding additional 2-channel
EoVDSL uplink modems
› Uses telephone-grade twisted copper pair, legacy serial
cabling, or standard 75Ω coaxial cable circuits to create
a drop-and-repeat/point-to-multipoint Ethernet-based
network
› Ideal for those applications where an existing installed
base of copper wiring is available.
› Automatically selects fastest usable data rate, depending
upon the copper circuit transmission distance and cable
quality.
› Transmission Distances of up to 1.8 mi (3 km) between
drops over twisted copper, or up to 1500 ft (457 m)
between drops over coaxial cable
› Designed for installation in harsh out-of-plant/
unconditioned industrial or roadside operating
environments (-40º to +75º C ambient). Fully compliant
with the environmental requirements of NEMA TS-2 for
Traffic Signal Control Equipment
› Natural convection cooling; no fans or air filters for the
highest level of reliability, and zero periodic maintenance
› 120/240 VAC power supply included. The VDSL3 may also
be operated from an external source of +12 to +27 VDC.
› 5 Year Warranty
APPLICATIONS
› Industrial Security:
∙ Ethernet-compatible access control systems, intercom
systems, and IP-compatible CCTV camera surveillance
networks
∙ VOIP (Voice over IP) telephony networks
› ITS/Transportation:
∙ Connecting Ethernet-based traffic signal controller units onto
an existing twisted copper pair or coaxial cable circuit
∙ Video Detection Systems (VDS) for analyzing traffic flow
Per RJ-45 port: Link/Activity, 100Mbps,
Full duplex/Collision
EMI & Safety FCC Class A, CE, UL, cUL
IEEE Standards IEEE802.3, 802.3u
IEEE802.3x Flow control and Back Pressure
IEEE802.1D Spanning Tree protocol (Rapid
Spanning Tree Not Supported)
IEEE802.1Q VLAN Tagging
IEEE802.1p Class of Service
IEEE802.3ad Link Aggregation
Voltage Regulation Solid-State
Circuit Board Meets IPC Standard
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)†
Management 1. Web management (IE)
2. RS-232 console management
3. Telnet
Trunk IEEE 802.3ad Trunk with LACP for load distribution
control and fail over recover
Up to 4 ports per group, max 4 Groups
Class of Service Global system supports 2 queues for Hi and Low
priority.
QoS Global System support 8 levels of priority and
mapping to Hi/Low priority queue for Class of
Service
VLAN Port based VLAN, 802.1Q Tag VLAN, Protocol Type
VLAN, GVRP support VLAN ID up to 4094, VLANs
up to 256 groups
DHCP Support DHCP client
IP Multicast Support IGMP Snooping, supports 256 groups.
Support 2 types of Query mode for Enable/Disable
or Auto Query
Filter Database Support port static MAC address lock, MAC Filter,
Port Security.
Port Mirror Online traffic monitoring on up to eight ports.
Throughput:(Downstream / Upstream)
1000 ft (305 m) 70 Mbps / 68 Mbps
2500 ft (762 m) 26 Mbps / 17 Mbps
5000 ft (1524 m) 16 Mbps / 1 Mbps
7500 ft (2286 m) 5 Mbps / 0.5 Mbps
10,000 ft (3048 m) 1 Mbps / 0.25 Mbps
200 ft (61 m) 88 Mbps / 95 Mbps
500 ft (152 m) 85 Mbps / 93 Mbps
1000 ft (305 m) 83 Mbps / 89 Mbps
1500 ft (500 m) 76 Mbps / 83 Mbps
Faster data rates and greater transmission distances thru coaxial cable are possible,
depending upon the type and quality of the coaxial cable utilized
User-Configurable Selection Of:
- Master/Remote Operation
- Symmetrical/Asymmetrical Data
- Forward Error Correction
- Long or Short Range operation for optimal BER (Bit Error Rate) performance
EoVDSL Drop-and-Repeat/Point-to-Multipoint
over Copper Cable Transmission System
Overload Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
System Outline
Dimensions (L × W × H) 6.97 × 3.3 × 6.5 in. (17.7 × 8.4 × 16.5 cm)
Shipping Weight: <5 lbs./2.25 kg
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 0% to 95% (non-condensing)†
VDSL3 Power: A 100-264 VAC wall-mount power supply is
provided.
System Power Requirements for Operation of switch and uplink
modem from External Low-voltage DC Sources
+12 – +27 VDC @ < 1 A
† May be extended to humidity with condensation conditions by adding suffix ‘/C’
NOTE: In a continuing effort to improve and advance technology, product specifications
are subject to change without notice.