Comnet U) Series Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

CLFE4+1SMS[POE](C,U) Series

10/100 4TX+1EX ETHERNET SELF-MANAGED SWITCH
WITH POWER OVER ETHERNET (POE+)

This manual serves the following
ComNet Model Numbers:

CLFE4+1SMSC

CLFE4+1SMSU

CLFE4+1SMSPOEC

CLFE4+1SMSPOEU

The ComNet™ CopperLine® CLFE4+1SMS[POE](C,U) is a five-port Ethernet switch
with uplink management functionality and provides 4 copper ports operating at
10/100Mbps and is designed to combine four electrical ports into a single electrical
Cat5, UTP or Coax CopperLine port that forwards this data to the next network device.
There is no programming required to use this product. The ComNet CLFE4+1SMS
comes pre-programmed, preventing network video flooding with DIP switch selection
of the fifth electrical port as uplink or as an unmanaged switch. Ports 1–4 of the
CLFE4+1SMSPOE can supply up to thirty (30) watts of Power over Ethernet (PoE) and
incorporate PoE+ features based on the IEEE 802.3at standard. It is “Plug-and-Play”.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment
operating status. Table 2 on Page 7 describes the LED indicators for each light on
the unit.

These units are interchangeable between stand-alone or card mount configurations,
or may be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4
adaptor plate. See Figure A on Page 10 for mounting instructions.

INS_CLFE4+1SMS[POE](C,U)_REV– 10/27/11 PAGE 1TECH SUPPORT: 1.888.678.9427

INSTALLATION AND OPERATION MANUAL CLFE4+1SMS[POE](C,U) SERIES

FIGURE 1 – CLFE4+1SMSPOEC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT WITH POE

EXTENDED

DISTANCE

PORT 4

ETHERNET

PORT 3

ETHERNET

PORT 2

ETHERNET

PORT 1

ETHERNET

POE–
POE+

Black w/ White
Stripe (GND)

Black (+Vin)

POE Applications.

Operating Power: 9 to 12 VDC (non-PoE), 48 to 56VDC (PoE)
Power Consumption: 10W (non-PoE), 130W (Max PoE)

FIGURE 2 – CLFE4+1SMSPOEC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT WITH POE

CLFE4+1SMSPOEC Front Panel CLFE4+1SMSPOEC Rear Panel

10/100 data rate DIP switch
Local/Remote DIP switch
Managed/Unmanaged DIP switch

See Installation Instructions

Do not use for

TECH SUPPORT: 1.888.678.9427

INS_CLFE4+1SMS[POE](C,U)_REV– 10/27/11 PAGE 2

INSTALLATION AND OPERATION MANUAL CLFE4+1SMS[POE](C,U) SERIES

FIGURE 3 – CLFE4+1SMSPOEU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNIT WITH POE

EXTENDED

DISTANCE

PORT 4

ETHERNET

PORT 3

ETHERNET

PORT 2

ETHERNET

PORT 1

ETHERNET

POE–
POE+

Black w/ White
Stripe (GND)

Black (+Vin)

Operating Power: 9 to 12 VDC (non-PoE), 48 to 56VDC (PoE)
Power Consumption: 10W (non-PoE), 130W (Max PoE)

FIGURE 4 – CLFE4+1SMSPOEU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNIT WITH POE

CLFE4+1SMSPOEU Front Panel CLFE4+1SMSPOEU Rear Panel

10/100 data rate DIP switch
Local/Remote DIP switch
Managed/Unmanaged DIP switch
1 Pair/4 Pair DIP switch

See Installation Instructions

Do not use for

POE Applications.

TECH SUPPORT: 1.888.678.9427

INS_CLFE4+1SMS[POE](C,U)_REV– 10/27/11 PAGE 3