Comnet RLGE3FE7MS4, RLGE3FE7MS4-HV Specsheet
Electrical Substation-Rated Managed Ethernet Switch, with
(7) 10/100T(X) + (3) Configurable 10/100/1000T(X)/100/1000FX Ports
RLGE3FE7MS4
ComNet product series RLGE3FE7MS4 is a substation-rated and indus trially hardened managed layer 2
Ethernet switch. Fully compliant with the requirement s of IEC 61850-3, IEEE 1613 Class 2, EN50155, Class1/
Division 2 (Groups A, B, C, & D for hazardous environments), and NEMA TS-1/TS-2, the DIN-rail mountable
RLGE3FE7MS4 is intended for deployment in environments where high levels of electromagnetic noise and
inter ference (EMI) and severe volt age transients and surges are routinely encountered, such as electrical
utility substations and switchyards, heavy manufac turing facilities, track-side electronic equipment, and
other severe out-of-plant installations.
The RLGE3FE7MS4 provides 7 10/100BASE-TX communications ports, with 3 user-configurable
10/100/1000BASE-TX or 100/1000BASE-FX gigabit combo uplink ports. The use of SFPs for the three (3)
gigabit uplink ports provides a truly future-proof plat form, where the uplink optics may be changed in the
field at any time, to support changes in the user’s networking or cable plant requirements as they arise.
The internal/self- contained 12 to 60 VDC or 85 to 264 VAC/88 to 370 VDC power supply features redundant
power inputs, for the highest possible reliability in those installations where network availability is of the
utmost importance.
The RLGE3FE7MS4 suppor ts multiple Ethernet redundancy protocols, including ComNet C-Ring (recovery
time < 30ms, with >250 switches integrated within the ring), and MSTP with RSTP/STP compatibility. With
its ex tremely fast recover y time, the most mission-critical applications are fully protected from network
interruptions or temporary malfunctions due to possible short or long-term faults or outages within the
network.
FEATURES
› Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class
2 for electrical utility substations, EN50155 for railway applications, and
NEMA TS-1/TS-2 for traffic signal control equipment
› Environmentally hardened for deployment in difficult unconditioned out-of-
plant and roadside installations
› Extended ambient operating temperature range of -40˚ C to +85˚ C, for
use in virtually any environment. Conformally coated for humidity with
condensation or airborne particulate matter conditions
› Provided HTTPS/SSH protocol enhances network security
› PTP Client for precision time protocol clock synchronization
› Rugged metal housing. DIN-rail or panel-mountable, & rated for IP-30
ingress protection
› Redundant power supply inputs significantly reduce the possibility of
a single-point-of-failure, for the highest system and network reliability.
Multiple AC and DC operating voltages available.
› No fans or forced-air cooling; cooling via natural convection eliminates
unreliable and troublesome fans/moving parts
› Utilizes C-Ring, the fastest redundant Ethernet ring available; Recovery
time <10 ms with 250 units within a ring. Fully compatible and
interoperable with the Moxa Turbo Ring topology using ComRing
technology, and ComNet X-Ring, Dual-Homing, Couple Ring, and DualRing Topologies
› Supports ComChain, the ComNet-exclusive technology that provides add-
on network redundancy topology to any backbone network. ComChain
allows multiple redundant network rings of different redundancy protocols
to join and function together as a larger and more robust compound
network topology, while maximizing fault-recovery speed, flexibility,
compatibility, ease of use, and cost-effectiveness.
› eConsole-based Windows Utility for centralized switch and network
management
› Fault/event notification provided through Syslog, e-Mail, SNMP trap, or
relay alarm output
› DDM (Digital Diagnostic Monitoring) remotely ascertains the status of the
operating voltage, current, and operating temperature of the SFP modules
› 10/100 BASE-T(X), 10/100/1000T(X), and 100/1000 BASE-FX compatible
-40˚ TO +85˚ CEXCLUSIVE
› Flexible optics configuration via SFP plug-in modules provides multimode,
or single mode operation up to 120 km transmission distance between
nodes, or single-fiber/bi-directional communications
› IGMP Snooping V1/V2/V3 for multicast filtering, and IGMP Query V1/V2
› Port based VLAN (IEEE 802.1Q)
› Fully configurable through web-based or SNMP network management
› Lifetime Warranty
73FLEXIBILIT YDIN RAILSUBSTATION
APPLICATIONS
› Electrical substation SCADA and distribution automation networks;
protective relaying systems; power transmission & distribution systems;
remote/unattended wind farm, hydroelectric, and solar/photovoltaic
power generation facilities; and other electrical utility-specific
applications
› NERC-CIP-014 compliance for perimeter security, surveillance monitoring,
and controlled access to electrical substations and power generating
facilities, and other critical infrastructure/high value, mission-critical sites
and assets
› Perimeter security, surveillance monitoring, and controlled access to
electrical substations and power generating facilities, and other high-value,
mission-critical sites
› Industrial/Factory Automation & Process Control SCADA Networks
› Chemical and petrochemical refining and processing facilities, oil and gas
pipelines/transmission systems, and mining installations
› Food processing operations
› Wastewater treatment plants
› ITS/Transportation Traffic Signalization & Surveillance/Incident Detection
Networks
› Railway/trackside control and monitoring systems
› Integrated IP-Video, VOIP, and Data Transmission Networks
› Cellular telephony and wireless backhaul networks
* Small Form-Factor Pluggable Module. Sold separately.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RLGE3FE7MS4
Electrical Substation-Rated Managed Ethernet Switch, with
(7) 10/100T(X) + (3) Configurable 10/100/1000T(X)/100/1000FX Ports
ORDERING INFORMATION
Part Number Description
RLGE3FE7MS4/LV (7) 10/100BASE-T(X) / (3) 10/100/1000BASE-T(X) or 100/1000BASE-FX SFP Ports, Dual/redundant power inputs (12 to 60 VDC)
RLGE3FE7MS4/HV (7) 10/100BASE-T(X) / (3) 10/100/1000BASE-T(X) or 100/1000BASE-FX SFP Ports, Dual/redundant power inputs (85 to 264 VAC/88 to 370 VDC)
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
FEATURES
Network Redundancy
C-Ring is ComNet’s exclusive and proprietary redundant ring technology with extremely
rapid recovery time, making it ideal for mission critical applications where network
interruptions and temporary malfunctions cannot be tolerated.
Provides full network redundancy/ backup
Network recovery time: <10ms, with 250 switches configured within a ring
Supports, STP, RSTP, & MSTP per IEEE 802.1D/w/s
Supports Moxa® Turbo Ring, ComNet X-Ring, Dual-Homing, Couple Ring, and
C-Ring topologies are also supported.
Switch Properties
Switch in g Laten c y 7 µS
Switching Bandwidth 7.4 Gbps
Port Rate Limiting User-Defined
VLAN
Port Based
IEEE802.1Q Tag VLAN (256 entries)/ VLAN ID (UP to 4K, can be assigned from 1 to
4096) GVRP (256 Groups)
Maximum VLANs Available 4096
QoS (Quality of Service)
Supports IEEE 802.1p Class of Service for real-time traffic
Per port provides 4 priority queues
Port Base, Tag Base and Type of Service Priority
Port Mirroring: Monitors traffic in switched networks
TX packet only
RX packet only
Both TX and RX packets
Network Security
Enable/Disable ports, MAC address-based security (entries and filter) Port Security:
MAC address entries/filter
IP Security: IP address security management to prevent unauthorized intrusion
Login Security: Radius password management per IEEE802.1X
Supports Cisco TACACS+
Port-based network access control, per IEEE 802.1x
VLAN per IEEE 802.1q, to segregate and secure network traffic
Supports Q-in-Q VLAN for performance, & security to expand the VLAN space
SNMP v1/v2c/V3 encrypted authentication & access security
HTTP / SSH enhance network security
Windows Utility
eConsole-based. Supports centralized network management.
Configurable via web-based or Telnet/console port/CLI
IGMP
Number of IGMP Multicast Groups supported: 1024
Query mode (v1 & v2) for Multi-Media Application
Multicast snooping: v1, v2, and v3, with multicast filtering
Spanning Tree
Supports IEEE802.1D Spanning Tree
Supports IEEE802.1w Rapid Spanning Tree
Supports IEEE 802.1s Multiple Spanning Tree
Clock Synchronization
SNTP for synchronizing clocks over the network
PTP (Precision Time Control) Client
Bandwidth Control
Supports rate-based and priority-based rate limiting
Broadcast/Multicast Packet Filter Control
System Fault/Alarm Event Notification
System (Syslog) Log Server/Client
SMTP trap
e-Mail Alert
Relay Alarm Output
TFTP Firmware Update / System Configure Restore & Backup
Supports TFTP firmware update, Firmware Update /System Configure Backup & Restore
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Loading...