Comnet RLGE2FE16R-S-AC-288P, RLGE2FE16R-S-AC-288, RLGE2FE16R-S-AC-216, RLGE2FE16R-S-48-28-S22-CAN, RLGE2FE16R-S-12-28P-S22-CAN Quick Start Guide

QUICK START GUIDE

RLGE2FE16R

Substation-Rated, Enhanced Security Scada-Aware Ethernet
Layer 2 Managed Switch/Layer 3 Router With Optional 2G/3G
& 4G LTE Cellular Radio Link, Enhanced Network Security,
Terminal Server, PoE+, and 100FX SFP Ports

ComNet product series RLGE2FE16R are substation-rated and industrially hardened
layer 2 managed switches/layer 3 routers, with a unique and highly robust
packet processing SCADA-aware security firewall for the most mission-critical and
demanding cyber-security applications. The RLGE2FE16R is intended for deployment
in environments where high levels of electromagnetic noise and interference (EMI)
and severe voltage transients and surges are routinely encountered, such as electrical
utility substations and switchyards, heavy manufacturing facilities, track-side electronic
equipment, and other difficult out-of-plant installations. Layer 3 routing functionality
allows for the participation and foundation of a core network infrastructure.

The RLGE2FE16R is an ideal platform for deploying a secure communications and
networking gateway for remote electrical utility sites, and other critical infrastructure
applications.

QUICK START GUIDE RLGE2FE16R

Contents

About This Guide 3

Intended Audience 3

Related Documentation 4

About ComNet 4

Website 4

Support 4

Safety 4

Overview 5

Hardware and Interfaces 5

Device walkthrough 6

Logical Structure 7

Distance kept for natural air flow 7

Grounding 7

Connecting to a Power Source 7

Wiring DC Input voltage feed 7

Wiring AC Input voltage connector 8

Power Budget 9

Configuration Environment 9

Management over Console 10

Connecting to Device 10

Terminal 10

SS H 11

Modes of Operation 12

Configuration through CLI 13

Create management VLAN 15

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 2

QUICK START GUIDE RLGE2FE16R

About This Guide

This quick start guide includes relevant information for utilizing the Reliance RLGE2FE16R line of
switches.

The information in this document is subject to change without notice and describes only the
product defined in the introduction of this document.

This document is intended for the use of customers of ComNet only for the purposes of the
agreement under which the document is submitted, and no part of it may be reproduced or
transmitted in any form or means without the prior written permission of ComNet.

The document is intended for use by professional and properly trained personnel, and the
customer assumes full responsibility when using it.

If the Release Notes that are shipped with the device contain information that conflicts with the
information in this document or supplements it, the customer should follow the Release Notes.

The information or statements given in this document concerning the suitability, capacity, or
performance of the relevant hardware or software products are for general informational purposes
only and are not considered binding. Only those statements and/or representations defined in the
agreement executed between ComNet and the customer shall bind and obligate ComNet.

ComNet however has made all reasonable efforts to ensure that the instructions contained in this
document are adequate and free of material errors. ComNet will, if necessary, explain issues which
may not be covered by the document.

ComNet sole and exclusive liability for any errors in the document is limited to the documentary
correction of errors. ComNet is not and shall not be responsible in any event for errors in

this document or for any damages or loss of whatsoever kind, whether direct, incidental, or
consequential (including monetary losses), that might arise from the use of this document or the

information in it.

This document and the product it describes are the property of ComNet, which is the owner of all
intellectual property rights therein, and are protected by copyright according to the applicable laws.

Other product and company names mentioned in this document reserve their copyrights,
trademarks, and registrations; they are mentioned for identification purposes only.

Copyright © 2016 Communication Networks, LLC. All rights reserved.

Intended Audience

This user guide is intended for network administrators responsible for installing and configuring
network equipment. Users must be familiar with the concepts and terminology of Ethernet and
local area networking (LAN) to use this User Guide.

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 3

QUICK START GUIDE RLGE2FE16R

Related Documentation

The following documentation is also available:

» RLGE2FE16R Data sheet

» RLGE2FE16R Installation and Operation Manual

» RLGE2FE16R_ES Enhanced Security Software Options Installation and Operation Manual

» SFP Modules Data sheet

About ComNet

ComNet develops and markets the next generation of video solutions for the CCTV, defense, and
homeland security markets. At the core of ComNet’s solutions are a variety of high-end video
servers and the ComNet IVS software, which provide the industry with a standard platform for
analytics and security management systems enabling leading performance, compact and cost
effective solutions.

ComNet products are available in commercial and rugged form.

Website

For information on ComNet’s entire product line, please visit the ComNet website at

http://www.comnet.net

Support

For any questions or technical assistance, please contact your sales person ([e-mail]) or
the customer service support center ([e-mail])

Safety

» Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

» The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority.

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 4

QUICK START GUIDE RLGE2FE16R

Overview

Hardware and Interfaces

Depending on the RLGE2FE16R hardware variant ordered your switch will be equipped with a
combination of Fast Ethernet Ports, Gigabit Ethernet SFPs, Serial ports, and Cellular interfaces

» Serial RJ 45 ports supporting RS-232. Max 4 ports (Optional)

» Ethernet RJ45 copper 10/100 Fast Ethernet. (8 Standard, POE Optional) (Additional 8 10/100

ports optional, replaces cellular and serial)

» Ethernet SFP based ports,100/1000 GE. Max 2 ports (Standard)

» Ethernet SFP based ports 100 FE. Max 8 ports Additional. (Optional, replaces serial and cellular)

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 5

QUICK START GUIDE RLGE2FE16R

10 11

1

4

8

2

3

5

9

6

13

7

Figure 2 – R/S/22/28 Variant

12

Device walkthrough

» Ports Labeled 1 – 8 are Fast Ethernet capable of 10/100 FE capable ports with optional POE

capabilities.

» Ports Labeled S1-S4 are RJ45 ports with RS-232 support, establishing serial connections.

» Ports Labeled 9 & 10 are 100/1000 GE ports. They require SFPs in order to connect fiber/copper

interfaces. Many alternate SFP types are supported, including T1 lines, etc, please reach out to
support for testing inquirires before implementing any untested or non-ComNet SFP.

» Sim Slots 1 & 2 for cellular sim card placement.

» Port Labeled CON is communication port for serial console connections to device from PC.

» ANT for antenna placement.

» USB port for software upgrade.

» Power – AC or DC power supply needed depending on model.

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 6