Substation-Rated DIN-Rail Mountable All-Gigabit Managed Layer 2 Switch
with 16 10/100/1000 BASE-TX Ports + 4 Gigabit SFP* Uplink Combo Ports
RLGE20FX4TX16MS
ComNet product series RLGE20FX4TX16MS is a substation-rated and industrially-hardened
DIN-rail mount all-gigabit managed layer 2 switch. Fully compliant with the requirements of
IEC 61850-3, IEEE 1613 Class 2, EN50155, and NEMA TS-1/TS-2, the RLGE20FX4TX16MS
is intended for deployment in environments where high levels of electromagnetic noise and
interference (EMI) and severe voltage transients and surges are routinely encountered, such
as electrical utility substations and switchyards, heavy manufacturing facilities, track-side
electronic equipment, and other difficult out-of-plant installations.
The RLGE20FX4TX16MS provides 16 10/100/1000BASE-TX communications ports, with 4
10/100/1000BASE-TX or 100/1000BASE-FX SFP uplink ports. The use of SFPs for the four
(4) gigabit uplink ports provides a truly future-proof platform where the uplink optics may be
changed in the field at any time, to support changes in the user’s networking or cable plant
requirements as they arise.
The internal/self-contained 12 to 60 VDC or 85 to 264 VAC/88 to 373 VDC power supply
features redundant power inputs, for the highest possible reliability in those installations
where network availability is of the utmost importance.
The RLGE20FX4TX16MS supports multiple Ethernet redundancy protocols, including ComNet
C-Ring (recovery time < 30ms, with >250 switches integrated within the ring), and MSTP
with RSTP/STP compatibility. With its extremely fast recovery time, the most mission-critical
applications are fully protected from network interruptions or temporary malfunctions due to
possible short or long-term faults or outages within the network.
FEATURES
› Fully compliant with the requirements of IEC 61850-3 and IEEE 1613
Class 2, for use in electrical utility substations; NEMA TS-1/TS-2 for
Traffic Signal Control Equipment; and EN50155 for railway applications
› 16 × 10/100/1000BASE-TX Mbps Ethernet RJ-45 communications ports
› 4 × 100/1000BASE-X gigabit SFP uplink combo ports provide flexibility
and simplify network planning, & allows for future user field upgrades
and system/cable plant changes without having to replace the switch
› Environmentally hardened for deployment in difficult unconditioned
out-of-plant installations: Extended ambient operating temperature
range of -40˚ C to +75˚ C, (functional to +85 degrees C) for use in
virtually any environment. Conformal coating is optionally available
for humidity with condensation or airborne particulate matter
environments.
› Redundant power supply inputs significantly reduce the possibility of
a single-point-of-failure, for the highest system and network reliability.
Multiple AC and DC operating voltages available
› Supports IEEE 1588v2 Precision Timing Protocol, Transparent Clock
Synchronization (TC), for protective relaying and control applications
› User-programmable alarm relay for local or remote indication of a fault
condition
› C-Ring compatible: Network recovery time <30ms, with >250 switches
within the ring, for Ethernet redundancy.
› Com-Ring open architecture supports other switch manufacturers’ ring
technologies, for seamless network integration
› C-Chain allows multiple redundant network ring capability
› MSTP (RSTP/STP compatible)
› IEC 62439-2 MRP (Media Redundancy Protocol)
› IPV6 internet protocol (latest version)
› Support for Modbus TCP protocol
-40˚ TO 75˚ CSUBSTATIONEXCLUSIVE
› VLAN Unaware: Supports priority-tagged frames to be received by
specific IEDs (Intelligent Electronic Devices)
› Provides HTTPS/SSH protocol for enhanced network security
› IEEE 802.3az Energy-Efficient Ethernet technology, for substantially
reduced power consumption during periods of low data activity.
› SMTP client, NTP server protocol, and IP-based bandwidth
management
› Application-based QoS management
› Device Binding security function
› DOS/DDOS auto-prevention
› IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
› SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
› Port mirror function to monitor port data
› ACL, TACACS+ and 802.1x User Authentication for network security
› 9.6K Bytes Jumbo Frame
› Multiple notifications for warning of unexpected events
› Web-based, Telnet, Console (CLI), and Windows utility (eConsole)
configuration
› Supports LLDP Protocol eConsole support
› Ingress Protection Rating: IP-30, with rugged and robust DIN-rail
mountable metal housing
› No fans or forced-air cooling; cooling via natural convection eliminates
unreliable and troublesome fans/moving parts, with no periodic
maintenance requirements
› Lifetime Warranty
* Small Form-Factor Pluggable Module. Sold separately.
ALL GIGABIT 4 + 16FLEXIBILIT YDIN RAIL
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RLGE20FX4TX16MS
115.0 cm
159.0 cm
154 .0 cm
Substation-Rated DIN-Rail Mountable All-Gigabit Managed Layer 2 Switch
with 16 10/100/1000 BASE-TX Ports + 4 Gigabit SFP Uplink Combo Ports
APPLICATIONS
› Electrical substation SCADA and distribution automation
networks; protective relaying systems; power transmission
& distribution systems; remote/unattended wind farm,
hydroelectric, and solar/photovoltaic power generation
facilities; and other electrical utility-specific applications
› NERC-CIP-014 compliance for perimeter security,
surveillance monitoring, and controlled access to electrical
substations and power generating facilities, and other critical
infrastructure/high value, mission-critical sites and assets
› Industrial/Factory Automation & Process Control SCADA
Networks
› Chemical and petrochemical refining and processing
facilities, oil and gas pipelines/transmission systems, and
mining installations
OUTLINE DRAWING
› Food processing/pharmaceutical manufacturing facilities,
Wastewater treatment plants, and suppliers of potable
drinking water
› ITS/transportation closed-loop signalization and VMS/VDS/
surveillance/incident detection systems
› Railway/trackside control and monitoring system
› Military, government, and defense communications networks
› Integrated IP-video, VOIP, and data transmission networks
› Cellular telephony and wireless backhaul networks
6.06 in
4.53 in
Fail
G16
G16
G15
G14
G12
G10
G8
G6
G4
G2
10/100/1000T
G20
G13
G11
G19
G9
G7
G18
G5
G3
G17
G1
Close
PWR
PWR1
PWR2
Fail
Open
Relay
V+/L
V-/N
PWR2
V+/L
V-/N
PWR1
HV
Model
G15
PWR
PWR1
G20
G14
G12
G10
G8
G6
G4
G2
10/100/1000T
PWR2
G13
G11
G19
G9
G7
G5
G3
G1
Relay
COM
FailClose
FailOpen
G18
V2-
PWR2
V2+
G17
V1-
PWR1
V1+
LV
Model
6.26 in
ORDERING INFORMATION
Part Number Description
RLGE20FX4TX16MS/HV Substation-Rated 20-Port All-Gigabit Managed Switch, Dual Redundant High Volt age PSU Inputs
RLGE20FX4TX16MS/LV Substation-Rated 20-Port All-Gigabit Managed Switch, Dual Redundant Low Voltage PSU Inputs
Included Accessories
Options
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652.
This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
DIN-Rail Kit, Wall Mount Kit, Console cable, Product Suppor t CD
User-selectable SFP Modules¹ (Extra charge, consult factory)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RLGE20FX4TX16MS
A
SPECIFICATIONS
Substation-Rated DIN-Rail Mountable All-Gigabit Managed Layer 2 Switch
with 16 10/100/1000 BASE-TX Ports + 4 Gigabit SFP Uplink Combo Ports
Connectors
Combo Ports (4) 10/100/1000BASE-T(X) or 100/1000BASE-X SFP
RJ-45 Ports (16) 10/100/1000BASE-T(X), with Auto MDI/MDIX
Power Terminal Blocks
Serial Console RJ-45 Port RS-232 @ 115,200 bps 8,N,1 w/ console
cable (included)
Fault Relay Terminal Block
Ethernet Standards Supported
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
Switch Properties
Switching Latency 7 μs
Switching Bandwidth 40 Gbps
Max. VLANs Available 4095
IGMP Multicast Groups 128 for each VLAN
Port Rate Limiting User Defined
MAC Table 8000 MAC addresses available
Priority Queues 8
Processing Store-and-Forward
Security Features
Device Binding Security Feature
Enable/Disable Ports, MAC based port security
Port-Based Network Access Control: 802.1x
VLAN (802.1Q): To segregate and secure network traffic
Radius Centralized Password Management
SNMPv3 Encrypted Authentication and Access Security
HTTPS/SSH enhanced network security
TACACS+
Security Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
C-Ring Redundant Ring: Recovery time < 30ms, with over 250 units
TOS/Diffserv Supported
Quality of Service (802.1p) for Real-Time Traffic
VLAN (802.1Q) with VLAN Tagging
IGMP Snooping for Multicast Filtering
IP-Based Bandwidth Management
Application-Based QoS Management
DOS/DDOS Auto-Prevention
Port Configuration, Status, Statistics, Monitoring & Security
DHCP Server/Client/Relay support
SMTP Client
Modbus TCP
NTP Server
Network Redundancy
C-Ring
Com-Ring
Legacy Ring
MRP
MSTP (RSTP/STP Compatible)
Alarms & Monitoring Systems
Relay Output For fault event alarming.
Relay contacts rated at 1 A @ 24VDC
Power
Input Power LV Model: Dual power inputs 12~60 VDC
HV Model: Dual power inputs 85~264 VAC /
88~373 VDC
Power Consumption 18 W, Typical
Current Protection Overload Current Protected
Polarity Protection Reverse Polarity Protected
Electrical & Mechanical
LED Status Indicators Power × 3 R.M Ring Fault RJ-45 SFP
Size 4.53 × 6.3 × 6.06 in (11.5 × 15.9 × 15.4 cm)
Installation DIN Rail (35 mm Track) or Wall Mount
Shipping Weight 4.83 lb / 2.19 kg
Environmental
MTBF >250,000 hours
Operating Temperature -40˚ C to +75˚ C, Functional to +85˚ C
Storage Temperature -40˚ C to +85˚ C
Relative Humidity 5% to 95% (non-condensing)²
Regulatory Approvals
Power Automation IEC 61850-3, IEEE 1613
EMI FCC Part 15, CISPR (EN55022) Class A, EN50155
(EN50121-3-2, EN55011, EN50121-4)
ESD EN61000-4-2
RS EN61000-4-3
EFT EN61000-4-4
Electrical Surge EN61000-4-5
CS EN61000-4-6, EN61000-4-8, EN61000-4-11
Mechanical Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
GENCY COMPLIANCE
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
18 Mar 2016© 2016 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Com munication Net works.
Electrical Substation SCADA Network using RLGE20FX4TX16MS
RLGE20FX4TX16MS
OUTLINE DRAWING
Substation-Rated DIN-Rail Mountable All-Gigabit Managed Layer 2 Switch
with 16 10/100/1000 BASE-TX Ports + 4 Gigabit SFP Uplink Combo Ports
Protective Relay
RLGE20FX4TX16MS
RTU IED
Metering
RTU
RLGE20FX4TX16MS
Substation B
RTUMetering IP Camera
IED
Substation A
Protective Relay
IP Camera
Protective RelayProtective Relay Synchrophasor
Synchrophasor
RLGE20FX4TX16MS
RLGE20FX4TX16MSRLGE20FX4TX16MS
IEEE 1588v2
IED
Precision Timing Required
RLGE20FX4TX16MS
Substation C
IEEE 1588v2
IED
Engineering
Enterprise
Access
RLGE20FX4TX16MS
System Control
& Monitoring
Access
Central Control
& Monitoring Center
3 CORPORATE DRIVE
|
8 TURNBERRY PARK ROAD
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
|
USA
T: 203.796.5300
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
18 Mar 2016© 2016 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Com munication Net works.
Loading...