Comnet RL1000GW-AC-ESFP-S24-CNA, RL1000GW-AC-ESFP-S24, RL1000GW-AC-ESFP-S22-CNA, RL1000GW-AC-ESFP-S22, RL1000GW-AC-ESFP-S24-CEU Specsheet
...
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with
Optional 2G/3G/4G LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
RL1000GW
EXCLUSIVE
DIN RAIL FIREWALLFLEXIBILIT Y
ComNet product series RL1000GW are substation-rated and industrially hardened layer 3 router/
gateways, with a unique and highly robust packet processing SCADA-aware security firewall
for the most mission-critical and demanding cyber-security applications. The RL1000GW
is intended for deployment in environments where high levels of electromagnetic noise
and interference (EMI) and severe voltage transients and surges are routinely encountered,
such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside electronic equipment, and other difficult out-of-plant installations. Layer 3 routing
functionality allows for the participation and foundation of a core network infrastructure.
The compact-sized DIN-rail mountable RL1000GW is ideally suited to those installations and
applications where space may be limited. These features make the RL1000GW an effective
platform for deploying a secure communications and networking gateway for remote
electrical utility sites, and other critical infrastructure applications.
-40º TO +85ºCSUBSTATION LAYER 3
FEATURES
› Fully compliant with the requirements of IEC 61850-3 and
IEEE 1613 Class 2, for use in electrical utility substations; and
NEMA TS-1/TS-2 for Traffic Signal Control Equipment
› For NERC-CIP-5 and NERC-CIP-014 compliance, or any network
application demanding effective cyber-security protection
› Small Size: Perfect for installations where space may be
extremely limited
› Optional internal 2G/3G/4G LTE GPRS/UMTS cellular radio
modem with 2 SIM card slots, for maximum network reliability
and availability
› Serial interface supports 2 ports of RS-232 or 1 port each of
RS-232 and 4-wire RS-485 serial data, with serial gateway and
serial tunneling
› Optional 100/1000 Mbps SFP uplink port, for high-speed
connection to the user’s network
› Highly advanced and sophisticated security suite: Per Port
Deep Packet Inspection (DPI) SCADA-aware firewall supports
DNP-3, ModBus, IEC 104/101, and IEC 61850 protocols for
NERC-CIP-5 compliance
› Network Learning allows the user to easily create secure and
highly effective SCADA firewall rules
› IEEE 802.1X Port-based network access control
› L-2/3/4 ACL for incoming traffic, and layer 2/layer 3 VPN
with IPsec
UPLINK
11
› User APA (Authentication Proxy Access) controls remote
access and communications to end-point/edge of network
devices by all users, with extreme granularity across the
users, time, physical Ethernet or serial data ports, TCP ports,
and SCADA protocols. It also provides PCAP for the entire
allowed maintenance or access session.
› IPsec VPN with X.509 certificates, for use over any cellular or
fiber-optic network
› Ethernet layer 3 IP routing with integrated VPN
› Fault/event notification provided through Syslog and SNMP
traps
› Environmentally hardened for deployment in difficult
unconditioned out-of-plant installations: Extended ambient
operating temperature range of -40˚ C to +85˚ C. Conformal
coating is optionally available for humidity with condensation
or airborne particulate matter environments
› Rugged metal housing. DIN-rail mountable, & rated for IP-30
ingress protection
› Internal/self-contained universal power supply: Available in
operating voltage ranges from 9 to 60 VDC.
› No fans or forced-air cooling; cooling via natural convection
eliminates unreliable and troublesome fans/moving parts,
with no periodic maintenance requirements
* Small Form-Factor Pluggable Module. Sold separately.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RL1000GW
Small Form Factor Substation-Rated Secure Ethernet Layer 2 Switch/Layer 3 Router,
with Optional 2G/3G/4G LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
PRODUCT DESCRIPTION
Seamless & Reliable Connection to Any Network
The RL1000GW provides connectivity to any copper, fiber optic, or cellular radio-based Ethernet network. Fiber optic
networks are supported by the use of the optional 100/1000FX SFP uplink port. The optional highly resilient 2G/3G/4G LTE
cellular radio uplink with 2 SIM card slots for network redundancy, is ideal where fiber optic infrastructure is not available,
and may be used as a back-up link for those applications where interruption of service is not tolerable.
Extremely Effective Network Security, For the Most Mission-Critical Applications
Service Gateway
The RL1000GW service gateway includes a highly robust application layer, and provides legacy support, a Deep Packet
Inspection (DPI) application-aware SCADA firewall, serial tunnelling, protocol gateway, and extremely effective encryption
technologies. The service gateway offers a uniquely capable feature set which may serve as the hardware foundation to a
secure industrial controls network, and includes Protocol Gateway, VPN, and IPsec features.
Protocol Gateway
Gateway functionality between a DNP3 TCP client (master) and a DNP3 Serial RTU, IED, PLC, or other compatible device is
supported. This same functionality is supported across MODBUS TCP to MODBUS RTU, and IEC 61850 101/104 TCP to IEC
61850 101/104 RTU. This level of protocol conversion allows legacy protocols to be secured by enterprise and industry best
practice level encryption across a TCP IP-based network.
VPN
VPN tunnels are included for secure inter-site connectivity with IPsec, DM-VPN, and VPN GRE tunnels with key management
certificates. The supported VPN modes allow both layer-2 and layer-3 services, to best suit the user’s application-specific
cyber-protection needs.
IPSec
Internet Protocol Security (IPsec) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and/
or encrypting each IP packet of a communication session. IPsec-VPN as well as IPsec encryption are supported over other VPN
technologies. By implementing this level of industry-accepted encryption, data may traverse the network in a guaranteed delivery
method, as well as providing a cohesive and secure methodology for network communication across legacy and modern networks.
Identity Management and Authentication Proxy Access (APA)
NERC-CIP-5 defines the important requirement for network security protection of remote and unattended facilities. The
capability of identifying the user and creating specific network privileges per identified and authenticated user prior to
granting the user access to the network therefore becomes critical
The Authentication Proxy Access (APA) is a highly sophisticated security feature, which allows the network operator to
manage the substation or any other facility maintenance process. This feature gives full control of the maintenance process to
the operator by granting the capability to create dynamic policies to specific tasks within an explicitly defined time window.
Following this time window, operators receive reporting on activities performed during the task. This audit trail comes in the
form of an overview log, and a full packet capture (PCAP) of the session.
Before a user is allowed access to the network, they must log in to ComNet’s internal authentication process with their unique user
name and password. Upon validation of the user profile, specific access is granted to predefined devices and functions, and each
operation is logged. Multi-factor authentication is available when combined with the Cyber-Physical Integration feature.
X.509 Certificate Exchange for VPN Connections
VPN tunnels for secure inter-site connectivity with IPsec VPN, GRE Tunnels, and DMVPN technologies are fully supported. In
addition to IPsec encryption, X.509 key management certificates are provided. This certificate support allows for a secure signed
key exchange between a Certificate Authority, and two secure nodes. Having a third-party authority as a signing participant offers
end-to-end security that may be managed and reissued from a trusted central source within the user’s network.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RL1000GW
Small Form Factor Substation-Rated Secure Ethernet Layer 2 Switch/Layer 3 Router,
with Optional 2G/3G/4G LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
PRODUCT DESCRIPTION (Cont’d)
Cyber-Physical Integration
Integrated within the enhanced-security RL1000GW, is a physical identity server system, allowing the use of external
authentication hardware, such as magnetic card readers, biometric identification sensors, facial recognition cameras, etc., to
create a two-factor authentication to the APA feature. This provides an additional level of validation of the user and his/her
credentials, prior to granting the user network access. Once the authentication is validated and approved, a set of defined
policies allow the authenticated technician to perform their task.
Enhanced SCADA-Aware Firewall
A whitelist-based firewall is provided for every Ethernet and serial data port, so full firewall protection is available at all remote
sites within the network. Every SCADA protocol packet (IEC 61850, DNP3 RTU/TCP, ModBus RTU/TCP, and IEC 101/104) is
scanned and validated by the firewall engine for its source and destination, as well as its protocol and packet content.
The structure of the distributed firewall allows the creation of a unique firewall at each access point to the network. This is
critical for securing against insider cyber-attacks, compromised field devices, man-in-the-middle attacks, and a myriad of
alternate attack vectors, by providing a secure baseline.
Two firewall states are included: Monitoring, and enforcing. The monitoring state provides an alarm at the control center for
any network violation, without blocking the network traffic. The enforcing state is extremely effective for blocking suspicious
traffic, while also triggering a violation alarm at the control center.
DPI (Deep Packet Inspection) SCADA Protocols Firewall
ComNet’s distributed DPI firewall ensures that the operator will have full control over the network, even when faced with a
sophisticated attempt at breaching the network. Monitoring SCADA commands, this highly robust whitelist-based firewall
analyses SCADA network traffic, and is provided for every Ethernet and serial data port, so full firewall protection is available at
all remote sites within the network, as well as all IEDs, RTUs, PLCs, or any other device connected to the network. Every SCADA
protocol packet (IEC 61850, DNP3 RTU/TCP, ModBus RTU/TCP, and IEC 101/104) is scanned and validated by the firewall
engine for its source and destination, as well as its protocol and its specific packet
Any detected abnormal traffic behavioral patterns are blocked, any affected subnets are isolated, and alerts are automatically
generated.
Ease of Installation and Network Integration
High levels of cyber-security experience are not required to successfully deploy the RL1000GW. It is fully supported by
ComNet’s Reliance Product Configuration Utility and CLI, allowing the secure switch/router to be easily configured, and to
diagnose network and security functions.
Configuration of the secure firewall is also simple. Once connected to the user’s network, the RL1000GW immediately
begins to collect and analyse information across the network, including from other connected devices, traffic behavior, etc.
Recommended firewall rules are then suggested to the user; the implementation of these rules is optional, and they can be
easily edited using the Configuration Utility.
OAM (IEEE 802.3-2005 & IEEE 802.1ag) and QoS are also supported. Strict priority, Weighted Round Robin (WRR), ingress
policing, and egress traffic shaping are included for traffic management.
Serial Data Interface
The 2-port serial interface is available for applications including terminal server with protocol gateway and serial tunnelling
functionality, and provides direct connectivity to legacy RS-232 or 4-wire RS-485 serial data IEDs, RTUs, PLCs, and other devices.
PRODUCT OPTIONS
Cellular Radio Option
An internal 2G/3G/4G LTE GPRS/UMTS cellular radio modem, with 2 SIM card slots for maximum network reliability and
availability. All world-wide cellular radio frequency bands are supported.
100/1000 Mbps SFP Uplink Option
Provides one high-speed 100/1000 Mbps SFP uplink port for direct connection to fiber, via ComNet-furnished SFPs
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RL1000GW
(112.7)
APPLICATIONS
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
› NERC-CIP-5 compliance for electrical substation automation
& SCADA networks; protective relaying systems; power
transmission & distribution systems; remote/unattended wind
farm, hydroelectric, and solar/photovoltaic power generation
facilities; and other electrical utility-specific applications
› NERC-CIP-014 compliance for perimeter security,
surveillance monitoring, and controlled access to electrical
substations and power generating facilities, and other critical
infrastructure/high value, mission-critical sites and assets
› Distribution Automation: Status indication, monitoring, and
control of reclosers and other remotely-located electrical
utility-specific equipment, via the internal cellular radio link
› Industrial/Factory Automation & Process Control SCADA
Networks
OUTLINE DRAWING
› Chemical and petrochemical refining and processing
facilities, oil and gas pipelines/transmission systems, and
mining installations
› Food processing/pharmaceutical manufacturing facilities›
Wastewater treatment plants, and suppliers of potable
drinking water
› ITS/transportation closed-loop signalization and VMS/VDS/
surveillance/incident detection systems
› Railway/trackside control and monitoring systems
› City Center security and surveillance monitoring
› Military, defense, and government communications networks
› Integrated IP-Video, VOIP, and data transmission networks
› Cellular and wireless backhaul networks
(145.5)
(120)
(106)
Complete Dimensional Drawings for this product series are available at www.comnet.net
(17.7)
(50.3)
(42.8)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RL1000GW
A
SPECIFICATIONS
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
Connectors
1 or 2 × RS-232 RJ-45 serial port, with control lines
1 RS-485 RJ-45 serial port
1 × 10/100TX RJ-45 Ethernet port
1 × 100/1000 SFP¹ Ethernet port
Cellular modem with 2 SIM cards for GPRS/UMTS or HSPA/EVDO/LTE networks.
Discrete lines: 2 In, 2 Out
Console RS-232 RJ-45 serial port
Security
Distributed DPI Firewall Profile based firewall
Security rules planning per service group
Firewall monitoring Mode
Firewall enforcement Mode
Firewall Learning Mode
IEC 104 DPI Firewall
IEC 61850 DPI Firewall
Modbus TCP DPI Firewall
DNP3 TCP DPI Firewall
VPN IPsec Certificates X.509
IPsec CRL server
IPsec CA server
IPsec Dynamic Key Exchange
IPSec encryption AES
IPSec encryption 3DES
L3 IPSec VPN
L3 mGRE DM-VPN
Access control Access Lists L3
Access Lists L4
VRF
NAT
User activity report
local APA (Authentication Proxy Access)
User activity report (under local APA)
OS image encryption
Protection
Conditioned / scheduled system reboot
Protection between Cellular ISP (SIM cards backup)
Networking
SCADA gateway for IEC101/104, ModBus RTU/TCP and DNP3 RTU/TCP
Terminal Server frame and byte modes
Serial transparent tunneling byte mode
QOS
Routing Static Routing
OSPF v2
IPv4
Switching Auto Crossing
Auto Negotiation IEEE 802.3ab
VLAN Tagging
Time Local Time settings
Diagnostic Counters & statistics per Port
LED diagnostics
Ping
RMON
DDM
Management
Console serial port
Backup / Restore running config
Conditioned/ scheduled system reboot
Remote management and upgrade
TFTP/ SFTP Client
Safe Mode
Syslog
Mechanical
Indicator LEDs PWR Port Activity/Speed RUN SIM × 2 E2
Enclosure Rugged - IP 30 rated, No fans
Weight 1.4 kg
Size (H × W × D) 106 × 50 × 120 mm
Mounting DIN rail enclosure
Environmental
MTBF > 250,000 hours
Storage Temperature -40º to +85ºC
Operating Temperature -40º to + 85ºC²
Operating Humidity 0 to 95%
Power
Power input 12/24V Version: 9 - 36 VDC
24/48V Version: 18 - 60 VDC
GENCY COMPLIANCE
Consumption 12 W Max
Compliance
IEC 61850-3 - Electric Utility Substations
IEEE 1613, Class 2 - Electric Utility Substations
NEMA TS-1/TS-2 - Traffic Signal Control Equipment
[1] SFP Fiber modules require a fiber installation with a minimum 30 dB connector return loss. Multimode fiber needs to meet or exceed
fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652The use of Super Polish Connectors is
recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
RL1000GW
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
ORDERING INFORMATION
Part Number Description
RL1000GW/12/E/S22 RL1000GW with 2 x RS-232 and 1 x 10/100 Tx, 12/24V DC
RL1000GW/12/E/S24 RL1000GW with 1 x RS-232, 1 x RS-485 and 1 x 10/100 Tx, 12/24 VDC
RL1000GW/12/ESFP/S22 RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 1 x 100/1000 Fx SFP, 12/24 VDC
RL1000GW/12/ESFP/S24 RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 1 x 100/1000 Fx SFP, 12/24 VDC
RL1000GW/12/E/S22/CH+ RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 2G/3G/HSPA+ Cellular Modem, 12/24 VDC
RL1000GW/12/E/S24/CH+ RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 2G/3G/HSPA+ Cellular Modem, 12/24 VDC
RL1000GW/12/ESFP/S22/CH+ RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 2G/3G/HSPA+ Cellular Modem, 12/24 VDC
RL1000GW/12/ESFP/S24/CH+ RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 2G/3G/HSPA+ Cellular Modem, 12/24 VDC
RL1000GW/12/E/S22/CNA RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 4G LTE Cellular Modem (NA Bands), 12/24 VDC
RL1000GW/12/E/S24/CNA RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 4G LTE Cellular Modem (NA Bands), 12/24 VDC
RL1000GW/12/ESFP/S22/CNA RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (NA Bands), 12/24 VDC
RL1000GW/12/ESFP/S24/CNA RL1000GW with 1 x RS-232, 1 x RS -485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (NA Bands), 12/24 VDC
RL1000GW/12/E/S22/CEU RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 4G LTE Cellular Modem (EU Bands), 12/24 VDC
RL1000GW/12/E/S24/CEU RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 4G LTE Cellular Modem (EU Bands), 12/24 VDC
RL1000GW/12/ESFP/S22/CEU RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (EU Bands), 12/24 VDC
RL1000GW/12/ESFP/S24/CEU RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (EU Bands), 12/24 VDC
RL1000GW/48/E/S22 RL1000GW with 2 x RS-232 and 1 x 10/100 Tx, 24/48V DC
RL1000GW/48/E/S24 RL1000GW with 1 x RS-232, 1 x RS -485 and 1 x 10/100 Tx, 24/48 VDC
RL1000GW/48/ESFP/S22 RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 1 x 100/1000 Fx SFP, 24/48 VDC
RL1000GW/48/ESFP/S24 RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 1 x 100/1000 Fx SFP, 24/48 VDC
RL1000GW/48/E/S22/CH+ RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 2G/3G/HSPA+ Cellular Modem, 24/48 VDC
RL1000GW/48/E/S24/CH+ RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 2G/3G/HSPA+ Cellular Modem, 24/48 VDC
RL1000GW/48/ESFP/S22/CH+ RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 2G/3G/HSPA+ Cellular Modem, 24/48 VDC
RL1000GW/48/ESFP/S24/CH+ RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 2G/3G/HSPA+ Cellular Modem, 24/48 VDC
RL1000GW/48/E/S22/CNA RL1000GW with 2 x RS-232, 1 x 10/100 Tx and 4G LTE Cellular Modem (NA Bands), 24/48 VDC
RL1000GW/48/E/S24/CNA RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 4G LTE Cellular Modem (NA Bands), 24/48 VDC
RL1000GW/48/ESFP/S22/CNA RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (NA Bands), 24/48 VDC
RL1000GW/48/ESFP/S24/CNA RL1000GW with 1 x RS-232, 1 x RS -485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (NA Bands), 24/48 VDC
RL1000GW/48/E/S22/CEU RL1000GW with 2 x RS -232, 1 x 10/100 Tx and 4G LTE Cellular Modem (EU Bands), 24/48 VDC
RL1000GW/48/E/S24/CEU RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx and 4G LTE Cellular Modem (EU Bands), 24/48 VDC
RL1000GW/48/ESFP/S22/CEU RL1000GW with 2 x RS-232, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (EU Bands), 24/48 VDC
RL1000GW/48/ESFP/S24/CEU RL1000GW with 1 x RS-232, 1 x RS-485, 1 x 10/100 Tx, 1 x 100/1000 Fx SFP and 4G LTE Cellular Modem (EU Bands), 24/48 VDC
Optional Part No Description Included
ANT 3G-2M 2G/3G External Grade Cellular Antenna with 2M cable (1 required per switch) Extra Charge, Consult Factory
ANT3G -5M 2G/3G External Grade Cellular Antenna with 5M cable (1 required per switch) Extra Charge, Consult Factory
ANT4 G-2M 4G LTE External Grade Cellular Antenna with 2M cable (1 required per switch) Extra Charge, Consult Factory
ANT4 G-5M 4G LTE External Grade Cellular Antenna with 5M cable (1 required per s witch) Extra Charge, Consult Factory
Power Supply 12 V, 24 V or 48 V DC DIN Rail power supply Extra Charge, Consult Factory
Conformal Coat Add suf fix ‘/C’ for Conformally Coated Circuit Boards to ex tend to condensation conditions Extra Charge, Consult Factory
SFP Modules¹ User selection of ComNet SFP (See SFP Modules data sheet for product numbers and compatibility) Extra Charge, Consult Factory
DINBKT3 19-inch rack mount panel adapter Extra Charge, Consult Factory
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2016 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Com munication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
22 Aug 2016
RL1000GW
Secure Cellular Radio Connection of Reclosers, for Distribution Automation
Le
Recloser
Securing Distributed Networks: Process Control
Secure Network
ITS/Tr affic Signalization System Over Cellular Radio
RS
RS
IP
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
TYPICAL APPLICATIONS
RL1000GW
Recloser
RL1000GW Cellular Link
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
Cellular Link
System Monitoring
RL1000GW
gacy Recloser
(RS-232)
Central Control & Monitoring Center
RL1000GW
PLCs
RL1000GW RL1000GW
Cellular Link
PLCs
RL1000GW
Layer 2 Switch/
Layer 3 Router
Layer 2 Switch/
Layer 3 Router
Cellular Network
-232
RL1000GW RL1000GW
-232
RL1000GW
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2016 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Com munication Net works.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
Alternate Land Based
Network Path
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
Managed Switch
Managed Switch
Secure TOC Network
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
22 Aug 2016
RL1000GW
Secure Network
Securing Remote Access
Secure Network
Securing A Wireless Radio Link
Unsecure Network
Securing Devices on an Unsecure Network
Secure Network
Securing Exterior Sites
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
TYPICAL APPLICATIONS (CONT’D)
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
Managed Switch
RL1000GW
RL1000GW RL1000GW
Internet
Managed Switch
Unsecure
5GHz Wireless
Link
Layer 2 Switch/
Layer 3 Router
Layer 2 Switch/
Layer 3 Router
RL1000GW
RL1000GW
© 2016 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Com munication Net works.
RL1000GW RL1000GW
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
Managed Switch
Managed Switch
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
Managed Switch
Managed Switch
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
RL1000GW
Managed Switch
Managed Switch
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
22 Aug 2016
Loading...