Comnet FXA2C1S1B, FXA2C1S1A, FXA2C1M1B, FXA2C1M1A Specsheet

2 Audio Channels + 1 Contact Closure
FTA/FRA2C1(M,S)1 and FXA2C1(M,S)1
INCLUDED HARDENED
2 CH
1 CH
OR
2 CH
The ComNet™ FTA/FRA2C1 Series audio multiplexer provides the transmission of two audio signals and one contact closure over one multimode or single mode optical fiber. A bidirectional model, FXA2C1(M,S)1, is also available. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. Plug­and-play design ensures ease of installation and no electrical or optical adjustments are required. Bi-color LED indicators confirm operational status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack mounted.
1 CH
FEATURES
› Two simplex or duplex audio channels
› One simplex or duplex contact closure
› 24-bit 96kHz digitally encoded transmission
› 20Hz - 20kHz audio bandwidth
› 600Ω audio input impedance
› No in-field electrical or optical adjustments required
› Distances up to 48km (30mi) without repeaters
› Automatic resettable fuses on all power lines
› Bi-color LED status indicators confirm operating status
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› Lifetime Warranty
APPLICATIONS
› Point-to-Point Audio Communication
› Push-to-Talk Applications
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FTA/FRA2C1(M,S)1 and FXA2C1(M,S)1
SPECIFICATIONS
2 Audio Channels + 1 Contact Closure
Audio
Input/Output Channels 2 Input/Output Signal 6 V pk-pk (+8.5 dBm) Bandwidth 20 Hz – 20 kHz Total Harmonic Distortion 0.01% Signal-to-Noise Ratio (SNR) <90 dB (typical)
Contact
Interface Response Time: 3 msec Input Dry Contact Closure Output SPST Relay, 0.2 A, 36 VDC Max Contact Rating,
Normally Open
Number Of Fibers 1 LED Indicators Audio
Link Contact Closure
Power
Operating Voltage Range 8 to 15 VDC Max Power Consumption 2 W
Electrical & Mechanical
Number of Rack Slots 1 Current Protection Automatic Resettable Solid-State Current Limiters Circuit Board Meets IPC Standard Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Shipping Weight <2 lbs/0.9 kg
Environmental
MTBF >100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 5% to 95% (non-condensing)¹
Connectors Power Terminal Block
Optical ST (Standard, other connectors available by request) Audio Terminal Block Contact Terminal Block
ORDERING INFORMATION
Optical
Part Number Description Wavelength Fiber
FTA2C1M1 2-Channel Audio Transmitter 1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FRA2C1M1 2-Channel Audio Receiver 1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FTA2C1S1 2-Channel Audio Transmitter 1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FRA2C1S1 2-Channel Audio Receiver 1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FXA2C1M1A 2-Channel Audio Transceiver “A” End 1310 nm/1550 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FXA2C1M1B 2-Channel Audio Transceiver “B” End 1550 nm/1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FXA2C1S1A 2-Channel Audio Transceiver “A” End 1310 nm/1550 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FXA2C1S1B 2-Channel Audio Transceiver “B” End 1550 nm/1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Power Budget Max Distance
TYPICAL APPLICATIONS
LEGEND
COPPER
A
A
C
FTA2C1
FRA2C1
OPTICAL FIBER
A
A
FXA2C1
FXA2C1
C
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2013 Communic ation Netwo rks. All Right s Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Com munication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
A
A
C
A
A
C
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
21 Nov 2013
Loading...