Comnet FVTRM1B Specsheet
10-bit digital bi-directional video or sync
Description
The ComNet™ FVTR(M)(S)1 series video transmitter/
receiver supports the transmission of short-haul quality
10-bit digital bi-directional video or sync over one
multimode or single mode optical fiber. This module
is universally compatible with major CCTV camera
manufacturers. Plug-and-play design ensures ease
of installation and no electrical or optical adjustments
are ever required. Bi-color (Red/Green) LED indicators
are provided for rapidly ascertaining equipment
operating status. Packaged in the exclusive ComNet
ComFit housing, these units may be either wall or rackmounted, or may be DIN-rail mounted by the addition of
ComNet model DINBKT1 adaptor plate.
FVTR(M)(S)1
V
1
Features
- 10-bit Digital Video Transmission
- Bi-directional Video or Sync
- Compatible with all NTSC, PAL, or SECAM CCTV
camera systems
- Full Color Compatibility
- Exceeds RS-250C Short-Haul quality
- No In-field electrical or optical adjustments
- Bi-color (Red/Green) LED status indicators provide rapid
indication of critical operating parameters
- Integrated WDM for greater product reliability
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection from
power surges and other voltage transient events.
Applications
- CCTV
- Distances up to 30 miles (48 km) without repeaters
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use
– ComFit
- Automatic resettable fuses on all power lines
- Lifetime Warranty
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
specifications
10-bit digital bi-directional video or sync FVTR(M)(S)1
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): >67 dB @ Maximum
Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic
Module to maintain 6Mhz Bandwidth
WAVELENGTH 1310/1550 nm, Multimode
and Single Mode
NUMBER OF FIBERS 1
LED INDICATORS - Video Present - Power - Optical
CONNECTORS
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 2 W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
MADE IN THE
USA
PART
NUMBER
FVTRM1A
FVTRM1B
FVTRS1A
FVTRS1B
Accessories
Options
DESCRIPTION
Video Transmitter (1310/1550 nm)
Video Receiver (1310/1550 nm)
Video Transmitter (1310/1550 nm)
Video Receiver (1310/1550 nm)
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
FIBERS
REQUIRED
1
1
FIBER
Multimode
62.5/125µm
Single Mode
9/125µm
OPTICAL
PWR BUDGET
16 dB
16 dB
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
‡ Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
V V
FVTRS1A
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
FVTRS1B
OPTICAL FIBER
VIDEO (Coax)
MAX.
DISTANCE
3 km (2 miles)
48 km (30 miles)
‡
# RACK
SLOTS
1
1
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
06.15.10© 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
Loading...