Comnet FVTRM1A User Manual

INSTALLATION AND OPERATION MANUAL

FVTR

10-BIT DIGITAL BI-DIRECTIONAL VIDEO OR VIDEO SYNC

The FVTR(M)(S)1 series video transmitter/ receiver supports the transmission of

short-haul quality 10-bit digital bi-directional video or sync over one multimode

or single mode optical fiber.

This module is universally compatible with major CCTV camera manufacturers.

Plug-and-play design ensures ease of installation and no electrical or optical

adjustments are ever required. Bi-color (Red/Green) LED indicators are provided

for rapidly ascertaining equipment operating status.

These units are interchangeable between stand-alone or card mount

configurations. See Figure A on Page 4 for installation instructions.

See Figures 1 – 3 for complete installation details.

INS_FVTR_REV–

02/01/10

PAGE 1

INSTALLATION AND OPERATION MANUAL FVTR

FIGURE 1 – FVTR TRANSCEIVER

MULTIMODE OR SINGLE MODE
OPTICAL FIBER

BLACK

BLACK WITH WHITE STRIPE

FIGURE 2 – FVTRD TRANSCEIVER

REAR PANELFRONT PANEL

Video termination Switch

Set switch to TERM (Terminate)
when video is not looping to other
video devices or is the last device
in a looping configuration.

NOTE: Remove Electrical Connector

for Rack Mount Units

TECH SUPPORT: 1.888.678.9427

INS_FVTR_REV–

02/01/10

PAGE 2