Comnet FVTR1D1A2C1M1, FVTR1D1A2C1 1 Series, FVTR1D1A2C1S1 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

FVTR1D1A2C1(M)(S)1

10-BIT DIGITALLY ENCODED BI-DIRECTIONAL VIDEO
WITH 1 BI-DIRECTIONAL DATA CHANNEL,
2 BI-DIRECTIONAL 24-BIT AUDIO CHANNELS
AND 1 BI-DIRECTIONAL CONTACT CLOSURE

The FVTR1D1A2C1 is a bi-directional 10-bit video transmission system along

with one channel of bi-directional data, two channels of bi-directional audio

and one bidirectional contact.

The data channel is configured using a two position switch to operate as RS232,

RS422 or RS485, either two (2) wire or four (4) wire. See Figure 4 on Page 3

for details.

The FVTR1D1A2C1 may be directly plugged into the ComNet Rack (Part #C1) or

operated as a standalone module powered by the PS-9VDC power supply also

provided with the module. See Page 5 for mounting instructions.

The FVTR1D1A2C1 requires one optical fiber and may be supplied in a

multimode (M) or single mode (S) version.

See Figures 1 – 7 for complete installation details.

INS_FVTR1D1A2C1_REV–

6/16/10

PAGE 1

INSTALLATION AND OPERATION MANUAL FVTR1D1A2C1

FIGURE 1 – FVTR1D1A2C1 TRANSCEIVER

MULTIMODE OR
SINGLE MODE
OPTICAL FIBER

BLACK

BLACK WITH WHITE STRIPE

Power Supply:

Surface Mount: 8–15 VDC @ 2W

Rack Mount: From Rack

FIGURE 2 – FVTR1D1A2C1 TRANSCEIVER

REAR PANELFRONT PANEL

Video termination Switch

Set switch to TERM (Terminate)
when video is not looping to other
video devices or is the last device
in a looping configuration.

NOTE: Remove Electrical Connector
for Rack Mount Units

TECH SUPPORT: 1.888.678.9427

INS_FVTR1D1A2C1_REV–

6/16/10

PAGE 2