FVT/FVR801(M)(S)1
8-channel 10-bit digital video
V
8
Description
The ComNet™ FVT/FVR801 video transmitter and
video receiver series utilize 10-bit digital encoding
and decoding for high-quality video transmission
that exceeds the requirements of EIA RS-250C for
short-haul video transmission. These environmentally
hardened units provide transmission of eight
independent video channels over one optical fiber and
are ideal for use in unconditioned roadside or out-ofplant installations. Bi-color (Red/Green) LED indicators
are provided for rapidly ascertaining equipment
operating status. Packaged in the exclusive ComNet
ComFit housing, these units may be either wall or rackmounted, or may be DIN-rail mounted by the addition of
ComNet model DINBKT1 adaptor plate.
Features
- 10-Bit digitally encoded video transmission, transmits 8
real-time color video signals
- Exceeds all requirements for EIA RS-250C short-haul
transmission: Extremely high video per formance
- Exceptionally low video distortion with zero
Performance Variation vs. Optical Path Loss
- Ideally suited to networks requiring multiple physical
layers where video degradation may be a problem
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection)
of NEMA TS-1/TS-2 and the Caltrans Specification for
Traffic Signal Control Equipment.
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection
from power surges and other voltage transient events.
- Robust design ensures extremely high reliabilit y in
unconditioned out-of-plant environments
- Bi-color (Red/Green) LED status indicators provide
rapid indication of critical operating parameters
Applications
- High-Performance CCTV (Fixed Video)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use
– ComFit
- Lifetime Warrant y
FVT/FVR801(M)(S)1
specifications
8-channel 10-bit digital video
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
# Input/Output Channels: 8
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB Typical
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
WAVELENGTH 1310 nm, Multimode and Single Mode
NUMBER OF FIBERS 1
LED INDICATORS - Video Sync Presence for Each Video Channel
- Optical Carrier Detect - Power
OPTICAL EMITTER Laser Diode
CONNECTORS
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 4W
Rack Mount: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in.,
(15.5 × 13.5 × 5.6 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’ to model number
for conformal coating.
PART
NUMBER
FVT801M1
FVR801M1
FVT801S1
FVR801S1
Accessories
Options
FIBERS
DESCRIPTION
Video Transmitter (1310 nm)
Video Receiver (1310 nm)
Video Transmitter (1310 nm)
Video Receiver (1310 nm)
REQUIRED
1
1 48 km (30 miles)16 dB
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
FIBER
Multimode
62.5/125µm
Single Mode
9/125µm
OPTICAL
PWR BUDGET
‡
MAX.
DISTANCE
2 km (1.2 miles)16 dB
†
# RACK
SLOTS
2
2
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Distance may be limited by optical dispersion. High bandwidth 50/125µm fiber is required to achieve maximum multimode distance. Contact ComNet tech support before using these units for distances
greater than 2 km. ‡ Add “HP” to model number for 23 dB.
V V
8 8
FVT801S1
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
FVR801S1
OPTICAL FIBER
VIDEO (Coax)
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
02.16.12© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
Loading...