Comnet FVT1D11, FVT1D1M1, FVT1D1S1, FVT1D1M1/M, FVR1D11 Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

FVT/FVR1D1(M,S)1[/M]
FVR2D2(M,S)2

DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL DATA
AND SIMPLEX CONTACT CLOSURE

The ComNet™ FV T1D1[/M] video transmitter, along with the FVR1D1 and FVR2D2,
supports the transmission of digital video transmission and bi-directional RS422 or
2- or 4-wire RS485 data channel over multimode or single mode optical fiber(s).
When the unit is operated in the RS422 2-wire data mode, a simplex contact closure
channel is available. This module is universally compatible with major CCTV camera
manufacturers. Plug-and-play design ensures ease of installation and no electrical or
optical adjustments are ever required.

Each unit incorporates a bi-color (Red/Green) indicating LED for monitoring proper
system operation. See Figure 9 on Page 6 for LED Indicator explanations.

The ComFit units in this series may be directly plugged into the ComNet Rack
(Part C1) or may be either wall-mounted, rack-mounted, or DIN-rail mounted by
the addition of ComNet model DINBKT1 adaptor plate. The small-size FVT1D1/M
transmitters are ideal for locations where space is at a premium and are surface mount
only. See Figure A on Page 8 for mounting instructions.

See Figures 1 – 12 for complete installation details.

INS_FVT/FVR1D1(M,S)1[M]_FVR2D2(M,S)2_REV– 04/05/12 PAGE 1

INSTALLATION AND OPERATION MANUAL FVT/FVR1D1(M,S)1[/M] & FVR2D2(M,S)2

FIGURE 1 – FVT1D1 TRANSMITTER

MULTIMODE OR
SINGLE MODE
OPTICAL FIBER

BLACK
BLACK WITH WHITE STRIPE/RED

Power Supply:
Surface Mount: 9-36 VDC @ 3W
Rack Mount: From Rack

NOTE: Remove Electrical
Connector for Rack Mount Units

FIGURE 2 – FVT1D1 TRANSMITTER

REAR PANELFRONT PANEL

TECH SUPPORT: 1.888.678.9427

INS_FVT/FVR1D1(M,S)1[M]_FVR2D2(M,S)2_REV– 04/05/12 PAGE 2

INSTALLATION AND OPERATION MANUAL FVT/FVR1D1(M,S)1[/M] & FVR2D2(M,S)2

FIGURE 3 – FVR1D1 RECEIVER

MULTIMODE OR
SINGLE MODE
OPTICAL FIBER

BLACK
BLACK WITH WHITE STRIPE/RED

FIGURE 4 – FVR1D1 RECEIVER

REAR PANELFRONT PANEL

Power Supply:
Surface Mount: 9-36 VDC @ 3W
Rack Mount: From Rack

NOTE: Remove Electrical
Connector for Rack Mount Units

TECH SUPPORT: 1.888.678.9427

INS_FVT/FVR1D1(M,S)1[M]_FVR2D2(M,S)2_REV– 04/05/12 PAGE 3