Video with Return Data
FVT/FVR15M2 SERIES
HARDENEDINCLUDED 1
The ComNet™ FVT/FVR15M2 series video and data transceiver suppor ts
the simultaneous transmission of video and return data over two multimode
optical fibers. The module is universally compatible with all major CCTV camera
manufacturers and supports RS232 and RS422 data interfaces and all major data
protocols. Plug-and-play design ensures ease of installation and no electrical or
optical adjustments are ever required.
1
FEATURES
› AM Video Transmission
› NTSC, PAL, or SECAM compatible
› Full Color Compatibility
› NTCIP Compatible
› Supports RS232 or RS422 Data interfaces
› Transparent to data encoding/compatible with major CCTV
camera manufacturers
› No In-field electrical or optical adjustments
› Distances up to 1.5 mi (2.5 km) without repeaters
› Designed for installation in harsh out-of-plant/unconditioned
industrial or roadside operating environments (-40º to +75ºC
ambient). Fully compliant with the environmental requirements
of NEMA TS-2 for Traffic Signal Control Equipment
› Voltage transient protection on all power and signal input/
output line provide protection from voltage surges and other
transient events
› Bi-color LED status indicators confirm operating status
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› May be DIN-rail mounted by the addition of ComNet model
DINBKT1 or DINBKT4 adaptor plate.
› Lifetime warranty
› Made in the USA
APPLICATIONS
› CCTV with one-way PTZ Camera Control
› CCTV with Remote Signalization
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FVT/FVR15M2 SERIES
SPECIFICATIONS
Video with Return Data
Video
Video Input 1 volt pk-pk (75 ohms)
Bandwidth 5 Hz - 10 MHz
Differential Gain <5%
Differen tial Phase <5˚
Tilt <1%
Signal-to-Noise Ratio (SNR) >55 dB @ 10 dB ATTN.
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Data
Data Format RS232, RS422, Manchester, biphase
Data Rate DC-115 Kbps (NRZ)
Wavelength 850 nm
Number of Fibers 2
Indicating LEDs › Video Sync Presence for Each Video Channel
› Transmit Data › Receive Data
Connectors
Optical ST
Power Terminal Block
Data Terminal Block
Video BNC (Gold Plated Center-Pin)
ORDERING INFORMATION
Power
Surface Mount 8 to 15 VDC
Power Consumption 4 W
Rack Mount Supplied From Rack
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
Fibers
Part Number Description
FV T15M2 Video Transmitter/Data Receiver
FV R15M2 Video Receiver/Data Transceiver
Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
[2] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
Required Fiber
2 Multimode 62.5/125µm 10 dB 2.5 km (1.5 mi) 1
Optical PWR
Budget Max Distance²
# Rack
Slots
TYPICAL APPLICATION
V
D
FVT15M2
V
FVR15M2
D
2 Fibers
OPTICAL FIBER
VIDEO (Coax)
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
TECH SUPPORT: 1.888.678.9427
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
10 Feb 2015© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.