Comnet FVT10D1ESM Specsheet
FVT10D1E(M)(S)M
FVT/FVR10D1E(M)(S)
10-bit digital video with one bi-directional data channel
+ 1 10/100 Mbps fast Ethernet port
Description
The ComNet™ FVT/FVR10D1E series video transmitter/
receiver and data transceiver and the FVT10D1EM
mini transmitter and data transceiver support the
simultaneous transmission of short haul quality 10-bit
EIA RS-250C digital video with one bi-directional data
channel plus one 10/100 Mbps fast Ethernet port.
The modules are universally compatible with major
CCTV camera manufacturers and supports RS232,
RS422 and 2 or 4-wire RS485 data interfaces and
most data protocols. It also supports “up-the-coax”
data transmission from most major manufacturers.
Packaged in the exclusive ComNet ComFit housing, the
FVT/FVR10D1E standard size units may be either wall
or rack-mounted, or may be DIN-rail mounted by the
addition of ComNet model DINBKT1 adaptor plate.
V
1
D
1
E
1
Features
- 10-bit digital video transmission
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- IEEE 802.3 compliant
- Automatic MDI/MDI-X crossover
- Exceeds all requirements for RS-250C short-haul
transmission: True broadcast video performance
- Compatible with all NTSC, PAL, or SECAM CCTV
camera systems
- Certified to the requirements of NEMA TS-1/TS-2 and
the Caltrans Specification for Traffic Signal Control
Equipment.
Applications
- Surveillance Systems with Control
- Hybrid Ethernet Systems
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection
from power surges and other voltage transient events.
- Automatic resettable fuses on all power lines
- Distances up to 30 miles (48 km)
- Bi-color (Red/Green) LED status indicators provide
rapid indication of critical operating parameters
- FVT/FVR10D1E(M)(S) is a hot-swappable rack module
- FVT/FVR10D1E(M)(S) is interchangeable between standalone or rack mount use – ComFit
- Lifetime Warrant y
FVT10D1E(M)(S)M
FVT/FVR10D1E(M)(S)
specifications
10-bit digital video with one bi-directional data
channel + one 10/100 Mbps fast Ethernet port
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
DATA
Data Interface: RS232, RS422 and RS485 (2W/4W), UTC (Up-the-
Coax)
Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
ETHERNET
Data Interface: 10/100 BASE-T/TX
Data Rate: 10/100 Mbps
Full Duplex
WAVELENGTH 1310/1550 nm, MM and SM
NUMBER OF FIBERS 1
OPTICAL EMITTER Laser Diode
LED INDICATORS - Link - Video - Data - Ethernet Activity
CONNECTORS
Optical: 1 ST connector
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: RJ45
Small-Size Data: Terminal Block
Ethernet: RJ45
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 350 mA
Current Protection: Automatic Resettable
Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) - Mini 4.1 × 3.7 × 1.1 in.,
(10.4 × 9.4 × 2.8 cm)
Size (in./cm) (L×W×H) - Full Size 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
PART
NUMBER
FVT10D1EMM
FVT10D1EM
FVR10D1EM
FVT10D1ESM
FVT10D1ES
FVR10D1ES
Accessories
Options
NOTE: This product requires a fiber installation with a minimum 35 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser
Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems.
DESCRIPTION
Mini-Video Transmitter/Data Transceiver
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
Mini-Video Transmitter/Data Transceiver
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
V
D
FVT10D1ESM
E E
9/125µm SM
Up to 48 km
(30 miles)
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
FIBERS
REQUIRED
1 3 km (2 miles)16 dB
1 48 km (30 miles)16 dB
FVR10D1ES
1 Fiber
FIBER
Multimode
62.5/125µm
Single Mode
9/125µm
OPTICAL
PWR BUDGET
V
D
OPTICAL FIBER
COPPER
MAX.
DISTANCE
†
11.07.11© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
Loading...