Comnet FVT10D1A2C1S1, FVT10D1A2C1M1 User Manual

INSTALLATION AND OPERATION MANUAL

FVT/FVR10D1A2C1

10-BIT DIGITALLY ENCODED VIDEO TRANSMITTER
WITH 1 BI-DIRECTIONAL DATA CHANNEL, 2 24-BIT AUDIO
CHANNELS AND 1 BI-DIRECTIONAL CONTACT CLOSURE

The FVT/FVR10D1A2C1 is a single channel 10-bit video transmission system

along with one channel of bi-directional data, two channels of bi-directional

audio and one bidirectional contact.

The data channel is configured using a two position switch to operate as RS232,

RS422 or RS485, either two (2) wire or four (4) wire. See Figure 4 on Page 3

for details.

The video channel also supports “up-the-coax” reverse data that is enabled

automatically.

The FVT/FVR10D1A2C1 may be directly plugged into the ComNet Rack (Part

#C1) or operated as a standalone module powered by the PS-9VDC power

supply also provided with the module. See Page 5 for mounting instructions.

The FVT/FVR10D1A2C1 requires one optical fiber and may be supplied in a

multimode (M) or single mode (S) version.

See Figures 1 – 7 for complete installation details.

INS_FVT/FVR10D1A2C1_REV–

4/27/09

PAGE 1

INSTALLATION AND OPERATION MANUAL FVT/FVR10D1A2C1

FIGURE 1 – FVT/FVR10D1A2C1 TRANSMITTER AND RECEIVER

MULTIMODE OR SINGLE MODE
OPTICAL FIBER

BLACK

BLACK WITH WHITE STRIPE

Power Supply:

Surface Mount: 8–15 VDC @ 2W

Rack Mount: From Rack

FIGURE 2 – FVT10D1A2C1 TRANSMITTER

REAR PANEL REAR PANELFRONT PANEL FRONT PANEL

FIGURE 3 – FVR10D1A2C1 RECEIVER

NOTE: Remove Electrical Connector for Rack Mount Units

TECH SUPPORT: 1.888.678.9427

INS_FVT/FVR10D1A2C1_REV–

4/27/09

PAGE 2