Comnet FVT1031M1-P Specsheet

10-Bit Digital Video with Bi-Directional

Data Transmitter for Pelco Dome Cameras

FVT1031(M,S)1/P

HARDENED

1 1

FOR PELCO® SPECTRA III/IV CAMERAS

The ComNet™ FVT1031/P series video transmitter, along with the ComNet FVR1031
series receiver, supports simultaneous broadcast-quality video transmission of 10-bit
digital video and bi-directional RS422 data over one multimode or single mode
optical fiber. The FVT1031/P is designed to plug directly into the Pelco Spectra III/IV
dome, and connects with power, video input and two way data via the Pelco electrical
connector.

FEATURES

› 10-bit digital video transmission

› Exceeds all requirements for RS-250C short-haul

transmission

› Compatible with Pelco Spectra III/IV dome cameras

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other
voltage transient events.

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low­line voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.

› Distances up to 60 km (37 mi)

› Designed for internal mounting within a Pelco Spectra dome

› Lifetime Warranty

APPLICATIONS

› High-Performance CCTV with PTZ Control

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FVT1031(M,S)1/P

SPECIFICATIONS

10-Bit Digital Video with Bi-Directional

Data Transmitter for Pelco Dome Cameras

Video

Video Input 1 volt pk-pk (75 ohms)
Overload >1.5V pk-pk
Bandwidth 5 Hz - 6.5 MHz
Differential Gain <2%
Differential Phase <0.7˚
Tilt <1%
Signal-to-Noise Ratio (SNR) 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to

maintain 6 Mhz Bandwidth

Data

Data Format RS-422
Data Rate DC-115 Kbps (NRZ)

Wavelength 1310/1550 nm, MM and SM

Power

Operating Voltage 8 to 15 VDC, 80 mA from Dome

Electrical & Mechanical

Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 4.0 × 2.5 in (10.16 × 6.4 cm)
Shipping Weight <0.5 lb / 0.225 kg

Environmental

MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹

Number of Fibers 1

Optical Emitter Laser Diode

Optical Connectors ST

ORDERING INFORMATION

Part Number Description Fiber Optical PWR Budget Maximum Distance²

FV T1031M1/P Video Transmitter/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 miles)

FVR1031M1 Video Receiver/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 miles)

FV T1031S1/P Video Transmitter/Data Transceiver Single Mode 9/125µm 20 dB 60 km (37 miles)

FV R1031S1 Video Receiver/Data Transceiver Single Mode 9/125µm 20 dB 60 km (37 miles)

Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (extra charge, consult factory)

[2] Distance may be limited by optical dispersion.

Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

TYPICAL APPLICATION

V

D

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

FVT1031M1/P

|

DANBURY, CONNECTICUT 06810

|

GILDERSOME

|

MORLEY

1 Fiber

|

|

USA

T: 203.796.5300

|

LEEDS, UK LS27 7LE

FVR1031M1

|

F: 203.796.5303

|

T: [phone]

V

D

|

TECH SUPPORT: 1.888.678.9427

|

F: [phone]

|

[e-mail]

OPTICAL FIBER
VIDEO (Coax)

|

[e-mail]

30 Dec 2014© 2015 Communic ation Networ ks. All Right s Reserve d. “ComNet ” and the “ComNe t Logo” are regis tered tra demarks of Comm unication Net works.