Page 1
FVT/FVR8018(M)(S)1
8-channel digital video + 8 bi-directional
data channels +
10-bit digital short-haul video
Description
The ComNet FVT/FVR8018(M)(S)1 Series transmits
eight (8) channels of 10-Bit Digital Video along with
eight (8) channels of bi-directional data over one single
mode or multimode optical fiber. The video quality
exceeds RS-250C for short-haul video transmission.
This equipment is environmentally hardened and
suitable for use in unconditioned roadside or out-of
plant installations. The FVT/FVR8018 is compatible
with NTSC, PAL and SECAM video transmission
protocols and supports bi-directional RS232, 422
and RS485 (2 & 4 Wire) data. Plug-and-play design
ensures ease of installation and no electrical or optical
adjustments are required.
Bi-Color (RED/GREEN) LED indicators are provided
to indicate the status of the system, video and data.
Packaged in the exclusive ComNet ComFit housing,
these units may be either wall or rack-mounted, or may
be DIN-rail mounted by the addition of ComNet model
DINBKT1 adaptor plate.
V
8
D
8
Features
- 10-bit digital video transmission: transmits 8 real-time
color video signals and 8 bi-directional data signals on
one optical fiber
- Supports RS232, RS422, and 2 or 4-wire RS485
- Exceeds all requirements for EIA RS-250C short-haul
transmission
- Compatible with all NTSC, PAL, or SECAM CCTV
camera systems
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection)
of NEMA TS-1/TS-2 and the Caltrans Specification for
Traffic Signal Control Equipment.
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection
from power surges and other voltage transient events.
- Robust design ensures extremely high reliabilit y in
unconditioned out-of-plant environments
- Bi-color (Red/Green) LED status indicators provide
rapid indication of critical operating parameters
Applications
- High-Performance CCTV (Fixed Video)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use
– ComFit
- Lifetime Warrant y
Page 2
FVT/FVR8018(M)(S)1
specifications
8-channel digital video + 8 bi-directional
data channels + 10-bit digital short-haul video
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
# Input/Output Channels: 8
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB Typical
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
DATA
Data Channels: 8
Data Interface: RS232, RS422 and RS485 (2W/4W)
Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
Bit Error Rate: <1 in 10-9 @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
WAVELENGTH 1310/1550 nm, Multimode and Single Mode
NUMBER OF FIBERS 1
LED INDICATORS - Video Sync Presence for Each Video Channel
- Received Data - Transmitted Data
- Optical Carrier Detect
OPTICAL EMITTER Laser Diode
CONNECTORS
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: RJ45 (5 pcs. Included)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 4W
Rack Mount: From Rack
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 3.3 in.,
(15.5 × 13.5 × 8.3 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
PART
NUMBER
FVT8018M1
FVR8018M1
FVT8018S1
FVR8018S1
Accessories
FIBERS
DESCRIPTION
Video Transmitter/Data Transceiver (1310/1550 nm)
Video Receiver/Data Transceiver (1550/1310 nm)
Video Transmitter/Data Transceiver (1310/1550 nm)
Video Receiver/Data Transceiver (1550/1310 nm)
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
REQUIRED
1
1 48 km (30 miles)16 dB
FIBER
Multimode
62.5/125µm
Single Mode
9/125µm
OPTICAL
PWR BUDGET
‡
MAX.
DISTANCE
2 km (1.2 miles)16 dB
# RACK
†
SLOTS
3
3
(5) RJ45 - RJ45 Breakout Wiring Kit (Includes cable and terminal block)
Options
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
† Distance may be limited by optical dispersion. High bandwidth 50/125µm fiber is required to achieve maximum multimode distance. Contact ComNet tech support before using these units for distances
greater than 2 km. ‡ Add “HP” to model number for 23dB
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject
to change without notice.
V V
D D
8
FVT8018S1
FVR8018S1
8
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
8
8
OPTICAL FIBER
VIDEO (Coax)
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
02.16.12© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
Loading...