Comnet FVR412M1 Specsheet

4-Channel Digitally Encoded Video + 2 Bi-directional Data Channels

+ 1 Bi-directional Contact Closure

FVT/FVR412(M,S)1

4 2

The ComNet™ FVT/FVR412(M)(S)1 Series transmits four channels of video utilizing state of the art digital encoding and decoding for high-quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fiber. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are required.

1INCLUDED

FEATURES

› Digitally encoded video transmission: transmits 4 real-time

color video signals and 2 bi-directional data signals on one optical fiber

› Supports RS232, RS422, and 2- or 4-wire RS485

› One bi-directional contact closure

› Compatible with all NTSC, PAL, or SECAM CCTV camera

systems

› Tested and certified by an independent laboratory for full

compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other voltage transient events.

› Robust design ensures extremely high reliability in

unconditioned out-of-plant environments

› Bi-color (Red/Green) LED status indicators provide rapid

indication of critical operating parameters

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use –

ComFit

› May be DIN-rail mounted with the ComNet model DINBKT4

adaptor (sold separately)

› Five year warranty

APPLICATIONS

› Multiple CCTV with PTZ

5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FVT/FVR412(M,S)1

SPECIFICATIONS

4-Channel Digitally Encoded Video + 2 Bi-directional Data Channels

+ 1 Bi-directional Contact Closure

Video

Video Input 1 volt pk-pk (75 ohms) Overload >1.5V pk-pk # Input/Output Channels 4 Bandwidth (minimum) 10 Hz - 6.5 MHz per channel Differential Gain <4% Dif ferential Phase <0.7˚ Tilt <1% Signal-to-Noise Ratio (SNR) 57 dB Typical Max. RG-59 COAX Distance 100m (300ft) Camera to Fiber Optic Module to

maintain 6Mhz Bandwidth

Data

Data Channels: 2 Data Interface: RS232, RS422 and RS485 (2W/4W) Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet Data Rate: DC-250 Kbps (NRZ) Bit Error Rate: <1 in 10-9 @ Maximum Optical Loss Budget Operating Mode: Simplex or Full-Duplex

Contact

Contact Inter face Response Time: 0.5 msec Input Dry Contact Closure Output SPST Relay, 0.5 A Contact Rating – normally open

Wavelength 1310/1550 nm, Multimode and Single Mode

Number Of Fibers 1

Indicating LEDs - Video Sync Presence for Each Video Channel

- Received Data - Transmitted Data

- Optical Carrier Detect

Optical Emitter Laser Diode

Connectors

Optical ST Power Terminal Block Video BNC (Gold Plated Center-Pin) Data Terminal Block Contact Terminal Block

Power

Operating Voltage Range 8 to 15 VDC Power Consumption 4W

Electrical & Mechanical

Number of Rack Slots: 2 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size 6.1 × 5.3 × 3.3 in (15.5 × 13.5 × 8.3 cm) Shipping Weight <2 lb./0.9 kg

Environmental

MTBF >100,000 hours Operating Temp -40˚ C to +75˚ C Storage Temp -40˚ C to +85˚ C Relative Humidity 0% to 95% (non-condensing)¹

ORDERING INFORMATION

Part Number Description Fiber Optical Power Budget Max. Distance²

FV T412M1 Video Transmitter/Data Transceiver (1310/1550 nm) Multimode 62.5/125µm 16 dB 2 km (1.2 mi)

FV R412M1 Video Receiver/Data Transceiver (1550/1310 nm) Multimode 62.5/125µm 16 dB 2 km (1.2 mi)

FV T412S1 Video Transmitter/Data Transceiver (1310/1550 nm) Single Mode 9/125µm 23 dB 69 km (43 miles)

FV R412S1 Video Receiver/Data Transceiver (1550/1310 nm) Single Mode 9/125µm 23 dB 69 km (43 miles)

Included DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)

Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)

DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice. [2] Transmission distance will be diminished if additional losses are introduced by the optical connectors, splices and other factors regarding the quality of the fiber. Operating distance of multimode is limited by the characteristics of the fiber bandwidth. For additional information or support, contact the ComNet Applications Engineering Department.

TYPICAL APPLICATION

LEGEND

FVT412 FVR412

VIDEO (COAX)

OPTICAL FIBER

C C

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

F: +44 (0)113 253 7462

TECH SUPPORT: 1.888.678.9427

INFO-EUROPE@COMNET.NET

INFO@COMNET.NET

10 Apr 2014