Comnet FVR2001M1 Specsheet

FVT/FVR2001(M)(S)1

2-channel digital video multiplexer

10-bit digital/short-haul

V

2

Description

The ComNet™ FVT/FVR2001 multiplexer simultaneously
transmits two channels of video over one optical
fiber utilizing state-of-the-art 10-bit digital encoding
and decoding for high-quality video transmission that
meets the requirements of EIA RS-250C for short-haul
video transmission. These environmentally hardened
units are ideal for use in unconditioned roadside or
out-of-plant installations. These units are completely
transparent to and universally compatible with any
NTSC, PAL, or SECAM CCTV camera systems. Plug­and-play design ensures ease of installation and no
electrical or optical adjustments are ever required.
Bi-color (Red/Green) LED indicators are provided for
rapidly ascertaining equipment operating status.
Packaged in the exclusive ComNet ComFit housing,
these units may be either wall or rack-mounted, or may
be DIN-rail mounted by the addition of ComNet model
DINBKT1 adaptor plate.

Features

- 10-bit digital video transmission: transmits 2 real-time
color video signals on one optical fiber

- Exceeds all requirements for EIA RS-250C short-haul
transmission: Extremely high video performance

- Exceptionally low video distortion with zero
Performance Variation vs. Optical Path Loss

- Ideally suited to networks requiring multiple physical
layers where video degradation may be a problem

- Compatible with all NTSC, PAL, or SECAM CCT V
camera systems

- Wide optical dynamic range: optical attenuators are
never required

- NTCIP compatible

- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection)
of NEMA TS-1/TS-2 and the Caltrans Specification for
Traffic Signal Control Equipment.

- Voltage transient protection on all power and signal
input/output lines provides unconditional protection
from power surges and other voltage transient events.

Applications

- High-Performance CCTV (Fixed Video)

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

- Robust design ensures extremely high reliability in
unconditioned out-of-plant environments

- Bi-color (Red/Green) LED status indicators provide
rapid indication of critical operating parameters

- Automatic resettable solid-state current limiters

- Interchangeable between stand-alone or rack mount use
– ComFit

- Hot-swappable rack modules

- Lifetime Warranty

2

2

FVT/FVR2001(M)(S)1

specifications

2-channel digital video multiplexer

10-bit digital/short-haul

VIDEO

Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
# Input/Output Channels: 2
Bandwidth (minimum): 10 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB Typical
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to

maintain 6Mhz Bandwidth

WAVELENGTH 1310 nm, Multimode and Single Mode

NUMBER OF FIBERS 1

LED INDICATORS - Video Sync Presence for Each Video Channel

- Link

- Power

CONNECTORS

Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)

ELECTRICAL & MECHANICAL

Power:
Surface Mount: 8-15 VDC @ 3W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg

ENVIRONMENTAL

MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*

* May be extended to condensation conditions by adding suffix ‘/C’ to model number

for conformal coating.

MADE IN THE

USA

PART
NUMBER

FVT2001M1

FVR2001M1

FVT2001S1

FVR2001S1

Accessories

Options

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Distance may be limited by optical dispersion.

DESCRIPTION FIBER

2-Channel Video Transmitter (1310 nm)

2-Channel Video Receiver (1310 nm)

2-Channel Video Transmitter (1310 nm)

2-Channel Video Receiver (1310 nm)

9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)

Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)

DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)

2

V V

FVT2001S1

FIBERS
REQUIRED

1

1 69 km (43 miles)23 dB

1 Fiber
9/125µm SM
Up to 69 km

(43 miles)

Multimode

62.5/125µm

Single Mode

9/125µm

FVR2001S1

OPTICAL
PWR BUDGET

2

OPTICAL FIBER
VIDEO (Coax)

MAX.
DISTANCE

3 km (2 miles)16 dB

# RACK

†

SLOTS

1

1

3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]

8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]

12.07.10© 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.