Comnet FVR1C1BS1, FVR1C1BS1-M, FVR1C1BM1 Specsheet
FVR1C1B(M)(S)1
8-bit digitally encoded video receiver
with contact closure
Description
The ComNet™ FVR1C1B receives one channel of video
over one optical fiber utilizing 8-Bit digital decoding for
high-quality video and contact closure transmission.
These environmentally hardened units are ideal for use
in unconditioned roadside or out-of-plant installations.
This module is universally compatible with major
CCTV camera manufacturers. Bi-color (Red/Green)
LED indicators are provided for rapidly ascertaining
equipment operating status. These units are
interchangeable between stand-alone or card mount
configurations.
V
1
C
1
Features
- 8-Bit digital video and contact closure transmission:
receives real-time color video signal over optical fiber
- Contact closure
- Exceptionally low video distortion with zero Performance
Variation vs. Optical Path Loss
- Compatible with all NTSC, PAL, or SECAM CCTV camera
systems
- Wide optical dynamic range: optical attenuators are
never required
- NTCIP compatible
Applications
- High-Performance CCTV (Fixed Video)
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection from
power surges and other voltage transient events.
- Robust design ensures extremely high reliability in
unconditioned out-of-plant environments
- Bi-color (Red/Green) LED status indicators provide rapid
indication of critical operating parameters
- Automatic resettable solid-state current limiters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount
use – ComFit
- Lifetime Warranty
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FVR1C1B(M)(S)1
specifications
8-bit digitally encoded video receiver
with contact closure
VIDEO
Video: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Video Channels: 1
Bandwidth (minimum): 10 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): >60 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
CONTACTS
Contact Interface: Response Time: 0.5 msec
Output:
SPST Relay, 0.5 A Contact Rating - normally open
WAVELENGTH 1310 nm, Multimode & Single Mode
NUMBER OF FIBERS 1
LED INDICATORS - Contact - Video
CONNECTORS
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 2W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
PART
NUMBER
FVR1C1BM1
Accessories
Options
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Distance may be limited by optical dispersion.
DESCRIPTION FIBER
Video Receiver (1310 nm)
Video Receiver (1310 nm)FVR1C1BS1
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
FIBERS
REQUIRED
1
1 54 km (33 miles)16 dB
Multimode
62.5/125µm
Single Mode
9/125µm
OPTICAL
PWR BUDGET
V
C
FVT1C1BM1-M
1 Fiber
62.5/125µm MM
Up to 4 km
(2.5 miles)
FVR1C1BM1
MAX.
DISTANCE
4 km (2.5 miles)12 dB
V
C
†
OPTICAL FIBER
VIDEO (Coax)
SLOTS
1
1
# RACK
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
09.27.11© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
Loading...