Comnet FVT110M1, FVT110M1-BO, FVR110M1, FVT110S1M, FVT110S1 Specsheet

...

10-bit digitally encoded video with “Up-the-Coax” extended

distance or bi-directional data (RS232, RS422, RS485 2/4W)

FVT/FVR110(M,S)1[/M]

HARDENEDINCLUDED

The ComNet™ FVT/FVR110 series is a video transmitter/receiver and data transceiver that supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode or single mode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also suppor ts “up-the-coax” data transmission from all major manufacturers, utilizing time-base correction these units can achieve distances of 48km. The FVT/FVR110 supports Panasonic Proteus™, Pelco Coaxitron™ and Bosch Bilinx™ Up-the-Coax systems. The FVT110 also transmits a single bi-directional contact closure signal. Packaged in the exclusive ComNet ComFit housing, the full-size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

111

FEATURES

› Supports Panasonic Proteus™, Pelco Coaxitron™ and Bosch

Bilinx™ Up-the-Coax systems

› 1 Full Duplex Data channel

› 1 Full Duplex Contact Closure

› Distances up to 30 miles (48 km)

› Exceeds all requirements for RS-250C short-haul

transmission: True broadcast video performance

› Time-Based Corrected Up-the-Coax Data

› Compatible with all NTSC, PAL, or SECAM CCTV camera

systems

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other voltage transient events.

› Automatic resettable fuses on all power lines

› Bi-color (Red/Green) LED status indicators provide

rapid indication of critical operating parameters

› FVT/FVR110(M,S)1 is a hot-swappable rack module

› FVT/FVR110(M,S)1 is interchangeable between stand-

alone or rack mount use – ComFit

› Lifetime Warranty

APPLICATIONS

› High-Performance CCTV with PTZ Control

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FVT/FVR110(M,S)1[/M]

10-bit digitally encoded video with “Up-the-Coax” extended

distance or bi-directional data (RS232, RS422, RS485 2/4W)

SPECIFICATIONS

Video

Video Input: 1 volt pk-pk (75 ohms) Overload:: >1.5V pk-pk Bandwidth: 5 Hz - 10 MHz Differential Gain: <2% Differential Phase: <0.7˚ Tilt: <1% Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to

maintain 6Mhz Bandwidth

Data

Data Interface: RS232, RS422, RS485 (2/4W), UTC (Up-the-Coax) Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet Data Rate: DC-250 Kbps (NRZ)

Contact

Input: Dry Contact Closures Output: SPST Relay 0.5 Contact Rating

Wavelength 1310/1550 nm, MM and SM

Optical Emitter Laser Diode

LED Indicators – Link – Video – Data

– Contact In – Contact Out – Power

Connectors

Optical: 1 ST connector Power: Terminal Block Video: BNC (Gold Plated Center-Pin) Data: Terminal Block Contact: Terminal Block

Power

Operating Voltage: 8 to 15 VDC Power Consumption: 5.25W

Electrical & Mechanical

Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm) (L×W×H) FVT/FVR110(M,S)1/M (Mini) 3.3 × 2.5 × 1.46 in (8.4 × 6.4 × 3.7 cm) FVT/FVR110(M,S)1 (ComFit) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) Shipping Weight: <2 lb / 0.9 kg

Environmental

MTBF: >100,000 hours Operating Temp: -40˚ C to +75˚ C Storage Temp: -40˚ C to +85˚ C Relative Humidity: 0% to 95% (non-condensing)1

ORDERING INFORMATION

Fibers

Part Number Description

FVT110M1/M Mini Video Transmitter/Data Transceiver 1 Multimode‡ – 62.5/125µm 16 dB 3 km (2 mi) N/A

FVT110M1 Video Transmitter/Data Transceiver 1 Multimode‡ – 62.5/125µm 16 dB 3 km (2 mi) 1

FVR110M1 Video Receiver/Data Transceiver 1 Multimode‡ – 62.5/125µm 16 dB 3 km (2 mi) 1

FVT110S1/M Mini Video Transmitter/Data Transceiver 1 Single Mode‡ – 9/125µm 16 dB 48 km (30 mi) N/A

FVT110S1 Video Transmitter/Data Transceiver 1 Single Mode‡ – 9/125µm 16 dB 48 km (30 mi) 1

FVR110S1 Video Receiver/Data Transceiver 1 Single Mode‡ – 9/125µm 16 dB 48 km (30 mi) 1

Accessories Options

DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)

[1] Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)

DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)

Required Fiber

Optical Power Budget

Maximum Distance

# Rack Slots

TYPICAL APPLICATION

FVT110S1/M FVR110S1

1 Fiber

9/125µm SM

Up to 48 km

(30 miles)

OPTICAL FIBER VIDEO (Coax)

3 CORPORATE DRIVE

8 TURNBERRY PARK ROAD

DANBURY, CONNECTICUT 06810

GILDERSOME

MORLEY

USA

T: 203.796.5300

LEEDS, UK LS27 7LE

F: 203.796.5303

T: +44 (0)113 307 6400

TECH SUPPORT: 1.888.678.9427

F: +44 (0)113 253 7462

INFO-EUROPE@COMNET.NET

INFO@COMNET.NET