Comnet CNFE1M1A-2, CNFE1S1A-4 Specsheet
10/100 Mbps Ethernet Electrical To Optical
Media Converter for Internal Mounting
CNFE1(M,S)/(X) SERIES
1HARDENED
The ComNet™ Ethernet internal mounted media converters are designed to
transmit and receive 10/100 Mbps data over multimode or single mode optical
fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps
Ethernet rate without any adjustments. The optical interface operates at a 100
Mbps Ethernet rate. These media converters are environmentally hardened
to operate in extreme temperatures. LED indicators are provided for rapidly
ascertaining equipment operating status. The CNFE1/X do not have a metal
enclosure and are designed to be incorporated within a device.
FEATURES
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
› IEEE 802.3 compliant
› Electrical port supports Auto-Negotiation for 10 Mbps or 100
Mbps, full duplex or half duplex data.
› Optical port supports 100 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Distances up to: 3 km (2 miles) Multimode
20 km (12 miles) Single Mode
› ST or SC optical connectors
› 1 or 2 fiber design
› No in-field optical adjustments required
› LED Indicators
› Lifetime Warranty
APPLICATIONS
› 10/100 Mbps Ethernet Media Converter
› High Speed Computer Links
› Direct Fiber Optic Interface for IP Camera
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
CNFE1(M,S)/(X) SERIES
SPECIFICATIONS
10/100 Mbps Ethernet Electrical To Optical
Media Converter for Internal Mounting
Data
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full or Half Duplex Electrical Port/
Full Duplex Optical Port
Connectors
Optical ST or SC, 1 or 2 Fibers
Power Screw Terminals
Electrical RJ45
LED Indicators - Optical Link/Data Activity - Power
Power
Operating Voltage Range 22-27 VAC or 8-24 VDC
Power Consumption 3W AC or 6W VDC
ORDERING INFORMATION
Electrical & Mechanical
Circuit Board Meets IPC Standard
Size (L×W×H) 1.9 × 1.9 × 1.1 in, (5 × 5 × 2.8 cm)
Shipping Weight <1 lbs./0.9 kg
Mounting Hardware (Not Included)
Screw Size 2.5 mm
Min. Standoff Height 8 mm
SAE requirements #2-56 × 3/16" long Nylon Pan Head Screw
as a minimum into a 3/16" Nylon Hex Standoff
that is #2-56 thread × 3/8" long minimum
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
1
Fibers
Part Number Description Connector
CNF E1M1A/2 10/100 Mbps Ethernet 1310/1550nm ST 1 Multimode 10 dB 3 km (2 miles)
CNF E1M1B/2 10/100 Mbp s Ethernet 1550/1310nm ST 1 Multimode 10 dB 3 km (2 miles)
CNF E1S1A/2 10/100 Mbps Ethernet 1310/1550nm ST 1 Singlemode 15 dB 20 km (12 miles)
CNF E1S1B/2 10/100 Mbps Etherne t 1550/1310nm ST 1 Singlemode 15 dB 20 km (12 miles)
CNF E1M2/3 10/100 Mbps Ethernet 1310nm SC 2 Multimode 10 dB 3 km (2 miles)
CNFE1S2/3 10/100 Mbps Ethernet 1310nm SC 2 Singlemode 15 dB 20 km (12 miles)
CNF E1M1A/4 10/100 Mbps Ethernet 1310/1550nm SC 1 Multimode 10 dB 3 km (2 miles)
CNF E1M1B/4 10/100 Mbp s Ethernet 1550/1310nm SC 1 Multimode 10 dB 3 km (2 miles)
CNF E1S1A/4 10/100 Mbps Ethernet 1310/1550nm SC 1 Singlemode 15 dB 20 km (12 miles)
CNF E1S1B/4 10/100 Mbps Etherne t 1550/1310nm SC 1 Singlemode 15 dB 20 km (12 miles)
CNF E1M2/5 10/100 Mbps Ethernet 1310nm ST 2 Multimode 10 dB 3 km (2 miles)
Options DC Plug-in Power Supply (not included)
[1]Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Mounting Hardware (not included)
Required Fiber
Optical Power
Budget
Maximum
Distance
TYPICAL APPLICATION
CNFE1M1A/2
1 Fiber
CNFE1M1B/2
EE
OPTICAL FIBER
CAT5e
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
© 2013 Communic ation Netwo rks. All Righ ts Reserv ed. “ComNet ” and the “ComNe t Logo” are regi stered tra demarks of Co mmunication Ne tworks.
|
DANBURY, CONNECTICUT 06810
|
GILDERSOME
|
MORLEY
|
|
USA
T: 203.796.5300
|
LEEDS, UK LS27 7LE
|
F: 203.796.5303
|
T: +44 (0)113 307 6400
|
|
F: +44 (0)113 253 7462
TECH SUPPORT: 1.888.678.9427
|
INFO-EUROPE@COMNET.NET
|
INFO@COMNET.NET
24 Jul 2013
Loading...