Page 1
Product
Guide
A76 Corner Locker w/o Baskets
A761 Corner Locker w/ Baskets
User and
Maintenance
Information
Important
Information:
Please save this
product guide.
Recommended Use
The A76 Corner Locker is designed to be used
in conjunction with the A75 (A751) and A755
(A756) Lockers. It allows the corner space to be
used in a series of lockers, as shown in Figure A.
WARNING
c This product is intended for use by children of
immature judgment, therefore supervision is
required at all times.
CAUTION
For indoor use only. The Locker is not waterproof.
Assembly
This product comes in two cartons:
1. A76A containing:
• The locker frame.
• This product guide.
• A761 includes 2 Deep Baskets
2. A76B containing:
• The top.
• A bag containing a packet of hardware for
attaching the locker to the wall or floor, and
machine screws for attaching the top.
Figure A
Customer Service:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
Sales@CommunityPlaythings.com
© 2011 by Community Products, LLC
WK48 DC L1869 Revision N
CAUTION
c DO NOT attempt installation of this product
until you have received both cartons.
To attach the top to the frame:
1. Place the top onto the frame so that the holes in
the side cleats match up with the inserts in the
top, and so the front of the top is flush with the
front of the locker.
2. Screw the four machine screws provided into the
holes as shown in Figure B.
If your shipment is incomplete, please contact
Customer Service.
Installation
This item should be fastened securely to the wall or
floor. Enclosed for that purpose are:
1. Four ¾" x #8 oval head screws
2. Four 1½" x #8 oval head screws
3. Two 2" corner braces
The ¾" screws are for the side or top of the locker.
The 1½" screws are for the wall or floor, but if
unsuited to the building construction, fasteners
appropriate to the construction must be used.
Figure B
Page 2
Page 2
User and
Maintenance
Information
(cont’d)
A76 Corner Locker w/o
Baskets
A761 Corner Locker w/
Baskets
WARNING
c Any locker configuration must be installed by a
competent carpenter or maintenance person to
ensure stability. Lockers installed back-to-back
must be fastened together for stability. The
customer must assume full responsibility that the
locker(s) will be secure for the long term.
Maintenance
Every two years, inspect for cracks, breaks, loose
parts, missing parts, and/or malfunctions. Remove
the product from service when any condition develops that might make operation unsafe.
Construction
The Corner Locker is constructed of maple with a
maple-faced plywood top and a clear nontoxic
finish. The hooks are made of tough ABS plastic.
Cleaning
Clean locker with soap and water. Too much water
will harm the finish of the wood. Baskets are
machine washable.
User Modifications
We are not responsible for modifications made by
customers to our products in the field without our
supervision, testing, or evaluation.
Customer Service:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
Sales@CommunityPlaythings.com
Recycling
The foam pads used in packaging this product are
reusable/recyclable. If you would like to help us preserve the environment, dispose of them appropriately
or return them to Community Playthings, US Rt. 40,
Farmington PA 15437.
Ordering Parts
To order replacement parts, contact Customer
Service with a description of the part(s) needed and
the ID Code from the product.
Use only replacement parts supplied by
Community Playthings.
© 2011 by Community Products, LLC
WK48 DC L1869 Revision N
Loading...