Community WX-1294 User Manual

WET X FULL-RANGE TWO-WAY

WX-1294

12-INCH LOUDSPEAKER (90° X 40°)

TECHNICAL SPECIFICATIONS

SYSTEM

Loudspeaker Type: Full-range, two-way, weather-resistant

Operating Range: 40 Hz to 22 kHz (-10 dB)

Frequency Response: 63 Hz to 18 kHz (-3 dB)

Max Input Ratings:

Maximum Output: 125 dB SPL / 131 dB SPL (peak)

Sensitivity (1W / 1m)

Free Space SPL:

Nominal Impedance: 8 ohms, 8.5 ohms @160 Hz minimum

Coverage Pattern: 90° H x 40° V

Axial Q / DI: 12.13 / 10.84, 2 kHz to 16 kHz

Crossover Frequency: 1.5 kHz

Recommended High Pass: 60 Hz 24 dB / Octave

TRANSDUCERS

LOW FREQUENCY

Driver: 1 x 12" cone, 3" voice coil, weather-treated

Sensitivity (1W / 1m): 97 dB (70 Hz - 2.2 kHz)

Power Capacity (Cont/Peak): 600W / 2400W

Nominal Impedance: 8 ohms

HIGH FREQUENCY

Driver: 1 x 2.87" voice coil / 1.4" exit

Sensitivity (1W / 1m): 108 dB (1 kHz - 20 kHz)

Power Capacity (Cont/Peak): 90W / 360W

Nominal Impedance: 8 ohms

PHYSICAL

Input Connection: 12' (4m) SJOW #16-gauge cable with stripped ends

Enclosure:

Finish: Black or White gel coat berglass

Mounting/Rigging

Provisions:

Environmental: IP56 per IEC 529

Dimensions – H x W x D:

(horizontal orientation)

Loudspeaker / Unit Weight: 82 lbs (37.3 kg) / 98 lbs (44.5 kg) with bracket

Shipping Weight: 122 lbs (55.3 kg)

CONFIGURE-TO-ORDER (CTO) OPTIONS

Custom Colors:

Extra Hang Points: 2 or 3 additional per side (several options available)

Bi-amp: Includes 4-conductor, 4-color SJOW cable

Transformer:

NOTE: All wattage gures are calculated using the rated impedance.

600W RMS, 1200W Program
69 volts RMS, 138 volts momentary peak

97 dB (63 Hz - 16 kHz 1/3 octave bands)
97 dB (250 Hz - 4 kHz speech range)

Trapezoidal berglass outer shell and face lined and

reinforced with 18mm (7-layer) marine grade plywood

Two 1/2"-13 rigging points; 304SS zinc-rich dual-layer
powder-coated bracket included; Integral 1/2"-13
safety cable mounting point

3-Layer Weather-Stop™ backing, 304SS zinc-rich

Grille:

dual-layer powder-coated

16" x 30.5" x 17"
(406.4 x 774.7 x 431.8 mm)

Custom color exterior-grade paint nish, RAL or custom

color matching available

70V: 400W / 200W / 100W
100V: 400W / 200W

Cable: Custom length

Available in Black or

White (standard)

APPLICATIONS

• Theme and Amusement Parks

• Outdoor Entertainment Centers

• Cruise Ships

• Multipurpose outdoor and indoor
venues

• Stadiums

• Music Pavilions

• Musical Fountains

• Water Parks

FEATURES

• 90° x 40° rotatable horn pattern

• Large format waveguide delivers excellent pattern control

• 1.4" (36mm) exit / 2.87" (72.2mm) VC HF transducer

• 12" (305mm) / 3" VC LF weather-treated transducer

• Passive operating mode standard

• All-weather, multi-layer glass composite shell over 18mm
7-layer marine grade plywood interior

• Dual-layer powder-coated 304 stainless steel mounting
bracket included

• Stainless steel hardware

• Available with optional built-in 400W transformer for 70V /
100V applications

DESCRIPTION

The WX-1294 is a premium quality, large format, full-range
loudspeaker system. The driver complement consists of a 12"
(305mm) high power low frequency driver and a 1.4" (36mm)
exit / 2.87" (72.9mm) edgewound voice coil compression

driver. The large format rotatable horn are delivers well

controlled 90° x 40° dispersion, and utilizes high order
crossovers to minimize band overlap.

The WX-1294 is used in passive operating mode. The passive
mode is designed to deliver outstanding performance without
the use of a processor. A custom bi-amp option can allow

greater system exibility allowing a compatible processor to

enhance the LF response.

The WET X Series is designed to provide high quality
music and voice reproduction in applications requiring
extreme weather-resistance. The WET X enclosure features
unmatched durability and ruggedness and is engineered for
use in permanent installations.

The loudspeaker enclosure and faceplate are constructed of
multi-layer glass composite lined with 18mm (7-layer) marine
grade plywood, resulting in extreme structural strength.
All exposed hardware is stainless steel or powder-coated
aluminum extrusion. A weather-resistant 304SS, dual-layer
powder-coated horizontal bracket is included for mounting.

Community strives to improve its products on a continual basis. Specications are therefore subject to change without notice.

WET SERIES • WET X

0

8

16

24

32

40

48

56

10 100 1000 10000

Impedance (Ohms)

Impedance

Min Z 30 Hz - 16000 Hz = 8.5 Ohms @ 160 Hz

-30

-25

-20

-15

-10

-5

0

5

10

100 1000 10000

Top/Bottom

0deg

10deg

20deg

30deg

40deg

-30

-25

-20

-15

-10

-5

0

5

10

100 1000 10000

Right

0deg

10deg

20deg

30deg

40deg

50deg

60deg

70deg

80deg

Q

Q

-30

-25

-20

-15

-10

-5

0

5

10

100 1000 10000

Left

0deg

10deg

20deg

30deg

40deg

50deg

60deg

70deg

80deg

Amplitude (dB SPL)

Frequency Response

6Hz Resolution, 1/6 Octave Smoothing, 1W/1m

10

100

100 1,000 10,000

Degrees

Beamwidth

H-Ŷ V-Ƈ

WX-1294

WET X FULL-RANGE TWO-WAY
12-INCH LOUDSPEAKER (90° X 40°)

FREQUENCY RESPONSE

120

110

100

90

80

Amplitude (dB SPL)

70

10 100 1000 10000

10

100

BEAMWIDTH

400

100

Degrees

10

100

6 Hz Resolution, 1/6 Octave Smoothing, 1W/1m

1000 10000

Frequency (Hz)

–n–Horizontal –t–Vertical

1000 10000

Frequency (Hz)

HORIZONTAL OFF-AXIS FREQUENCY RESPONSE LEFT

IMPEDANCE

Ohms

10

100 1000 10000

AXIAL Q

40

30

20

Q

10

0

100 1,000 10,000

100 1000 10000

Min Z 30 Hz - 16kHz= 8.5 Ohms @ 160 Hz

Frequency (Hz)

Q

Frequency (Hz)

HORIZONTAL OFF-AXIS FREQUENCY RESPONSE RIGHT

Frequency (Hz)

DIMENSIONS

Center of Gravity

9.1 42 " (2 32m m)

TOP / BRACKET

Center of Gravity

16. 0" (40 6m m)

30.50" (774mm)

FRONT

ARCHITECTURAL SPECIFICATIONS

The loudspeaker system shall be a two-way, full-range bass reex trapezoid-shaped design with one 12 in. (305mm) LF driver and one 1.4 in. exit HF
driver with a titanium diaphragm mounted to a 90° x 40° HF berglass horn. Drivers shall be connected to an integral crossover with a crossover frequency

of 1.5 kHz. The input connection shall be one 12' (4m) SJOW #16-gauge cable with stripped ends. The loudspeaker enclosure shall be a multi-layer glass
composite with a 16-gauge perforated stainless steel grille backed by open cell foam and a high density polyester mesh cloth. There shall be two 1/2"-13

rigging points. 95% of the shell interior shall be lined with wood, with 18mm 7-layer cross-laminated marine grade plywood on all interior at surfaces. All
wood shall be sealed with berglass resin. The system shall have a frequency response of 63 Hz to 18 kHz (-3 dB SPL), an input capability of 69V RMS,

97 dB sensitivity at 1W / 1m at 8 ohms nominal impedance. The nominal dispersion shall be 90° H x 40° V from 2 kHz to 16 kHz. The loudspeaker shall
be 16" (406.4mm) H (front) x 30.5" (774.7mm) W x 17" (431.8mm) D and shall weigh 82 lbs (37.3 kg).

CAUTION: Installation of loudspeakers should only be performed by trained and qualied personnel.

It is strongly recommended that a licensed and certied professional structural engineer approve the mounting design.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA

Phone [phone] · Fax [phone]· [e-mail]· www.communitypro.com

17. 0 " (4 31m m)

12.90 " (3 27m m)

Center
of Load

1/4"-20 Bracket

Locking Point

15.0" (381mm)

Frequency (Hz)

VERTICAL UP/DOWN OFF-AXIS FREQUENCY RESPONSE

4.63" (117mm)

1/2 "-13
Hang Point

9. 5" (241mm)

SIDES

Frequency (Hz)

Top of Cabinet

2" (50 mm)

1/2"-13 Safety Cable
Attachment Point

BACK

WX-12 94 [3SEPT2013]