Community W2-125 User Manual

WET SERIES II

DUAL15-INCH SUBWOOFER

Description

The W2-125 subwoofer is a high
output, high sensitivity, vented low
frequency system with solid low
frequency response down to 30 Hz.
It includes two 15" cast-frame, car­bon-fiber, double-spider, Ferrofluid­cooled speakers mounted to a
vented enclosure.

Engineered for use in permanent
installations, the loudspeaker en­closure and faceplate are con­structed of multilayer glass compo­site, providing extreme structural
strength. A three-layer Weather­Stop™ grille provides weather­resistance to the internal compo­nents, while all exposed hardware
is stainless steel or powder-coated
aluminum extrusion. Six 1/2-13
mounting points are included.

The W2-125 is backed by a five­year product warranty plus a fifteen

-year enclosure warranty

.

Applications

 Theme and Amuse-

ment Parks

 Outdoor Entertain-

ment Centers

 Cruise Ships
 Swimming Pools
 Music Pavilions
 Musical Fountains
 Water Parks

Features

All-Weather, Multilayer
Glass Composite
Enclosure

Stainless Steel Hardware
Integral Mounting Points
Dual-layer Powder Coated

Weather-Resistant Stain­less Steel Grille

Ferrofluid-Cooling
Available in Black

or White Finishes

SYSTEM

Format: Dual 15-inch subwoofer

Operating Range: 30 Hz - 1 kHz

Frequency Response: 35 Hz - 160 kHz (±3 dB)

Dispersion (-6 dB): 360º H x 180º V

Maximum SPL @1m: 125 dB continuous / 132 dB peak

Crossover Frequency: N/A

Sensitivity in SPL:

(1W/1m, free space)

Max Power Handling:

Impedance: Nominal 4Ω / Min. 3.7Ω at 130 Hz

99 dB ( 50 Hz - 160Hz, 1/3 octave)

400 W RMS
1000W Program

TRANSDUCERS

Low Frequency: 2 x 15” cast-frame, carbon-fiber,

double-spider (381 mm)

MECHANICAL

Enclosure: Hand-laminated fiberglass

Finish: Black or white gelcoat

Rigging Provisions: Six 1/2-13 rigging points

Input Connection: 16-2 SJOW (12 ft. / 4m)

TM

Grille: Three-layer Weather-Stop

Dimensions:

H x W x D

Net Weight: 91 lbs / 41.3 kg

24.38” (619 mm) x 33.63" (854 mm)
x 24.25" (616 mm)

Recommended signal processing available at communitypro.com.

FREQUENCY RESPONSE

IMPEDANCE

Min Z 20 Hz - 200 Hz = 3.7 Ohms @ 130 Hz

Architects’ and Engineers’ Specifications

The loudspeaker system shall be a vented bass reflex multilayer glass compos ite cabinet with two cast-frame, carbon-fiber,
double-spider 15-inch Ferrofluid-cooled woofers. There shall be a 12’ (4m) #16 gauge SJOW input connector. There shall be
six 1/2-13 integral threaded mounting points connected to internal bracing. T he system shall have an amplitude response of
35 Hz - 160 kHz (±3 dB), input capability of 40V RMS, 99 dB sensitivity at one meter and 2V input with 4 ohms nominal im­pedance. The nominal dispersion shall b e omnidirectional throughout the operating range. T he loudspeaker sh all be 24.38 in.
(619 mm) high x 33.63 in. (854 mm) wide x 24.25 in. (616mm) deep and weigh 91 lbs (41.3 kg).

Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.

W2-125 (13AUG2012)