SS-Series
Performance with Style
communitypro.com
Advanced Construction
S-Series cabinets are constructed of solid
11-ply cross-laminated birch plywood,
equipped with protective steel grilles, and
finished with a durable two-part catalyzed
polyester paint.
Sophisticated Internal
Electronics
S-Series circuit design features carefully
engineered crossovers, a Passive/Bi-amp
switch on full-range models, and
Community’s exclusive DYNA-TECH™
three-stage protective limiter. DYNA-TECH
protects against driver damage, even under
the most abusive conditions.
Superior HF Driver
Technology
Community’s Ferrofluid™ treated UC1 high
frequency compression driver represents a major
advance in electro-acoustic technology.
Featuring ring-radiator topology and a nonmetallic diaphragm, the UC1 provides extended
high frequencies, unparalleled transient
response, and reduced distortion over
conventional drivers.
Hand-Laid Fiberglass
Waveguides
Community’s hand-laid fiberglass waveguides
are known for letting you put the sound where
you want it. Superior pattern control provides
greater freedom in loudspeaker placement, plus
increased gain-before-feedback, while durable
fiberglass construction eliminates distortioncausing resonances.
Carbon Ring Cone
Technology
Community’s patent-pending Carbon Ring Cone
Technology is used on all full-range lowfrequency drivers to provide reduced distortion,
enhanced transient response, and 30% greater
cone area than conventional cone drivers.
Music / Voice Presence
Switch
S-Series full-range models are equipped
with a Music / Voice Presence switch that
enables the user to easily modify the
system to suit the acoustical environment
by re-voicing the loudspeaker’s tonal
balance for increased articulation in the
vocal range.
Cool-Coil™ Driver
Technology
Community’s patented Cool-Coil™ heat
evacuation technology used in the S-215S and
S-218S subwoofers minimizes cone driver
power compression and ensures long-term
reliability.
S-Series
• Bands and DJs
• Live sound
• Public address
• Club sound systems
• Mobile DJ
• Portable rental systems
• Corporate A/V
Model S-1296 S-1596 S-3294 S-3594 S-215S S-218S
Loudspeaker Type
Drivers
Nominal Dispersion 90° H x 60° V 90° H x 60° V 90° H x 40° V 90° H x 40° V 360° H x 180° V 360° H x 180° V
Operating Range 60 Hz to 20 kHz 50 Hz to 20 kHz 60 Hz to 20 kHz 55 Hz to 20 kHz 30 Hz to 2 kHz 30 Hz to 1 kHz
Two-way, full-range, vented bass
- switchable passive or active
crossover
LF: 1 x 12"
HF: 1 x 1"
Two-way, full-range, vented bass
- switchable passive or active
crossover
LF: 1 x 15"
HF: 1 x 1"
Three-way, full-range, vented
bass - switchable passive or
active crossover
LF: 1 x 12"
MF: 1 x 6.5"
HF: 1 x 1"
Three-way, full-range, vented
bass - switchable passive or
active crossover
LF: 1 x 15"
MF: 1 x 6.5"
HF: 1 x 1"
Dual driver subwoofer, vented bass - switchable
high-pass/parallel output
LF: 2 x 15" LF: 2 x 18"
Dual driver subwoofer, vented bass - switchable
high-pass/parallel output
High-Pass Output on
Subwoofers
Switchable high-pass output on S-Series
subwoofers maximizes performance when a
full-range system and a subwoofer are
powered by a single amplifier channel. Easily
select between HIGH-PASS OUTPUT and
PARALLEL INPUT mode.
Frequency Response 100 Hz to 16 kHz 90 Hz to 16 kHz 90 Hz to 16 kHz 80 Hz to 16 kHz 40 Hz to 200 Hz 40 Hz to 200 Hz
Max Input Ratings
(passive mode)
Sensitivity (1W/1m) 99 dB SPL 102 dB SPL 100 dB SPL 101 dB SPL 97 dB SPL* 100 dB SPL*
Maximum SPL
(continuous/peak)
Nominal Impedance 8 ohms 8 ohms 8 ohms 8 ohms 4 ohms 4 ohms
Input Connection
Rigging Provisions
Construction 11-ply cross laminated birch 11-ply cross laminated birch 11-ply cross laminated birch 11-ply cross laminated birch 11-ply cross laminated birch 11-ply cross laminated birch
Finish
Dimensions (H x W x D)
Weight 42 lbs (19.1 kg) 56 lbs (25.4 kg) 60 lbs (27.2 kg) 67 lbs (30.4 kg) 103 lbs (46.7 kg) 145 lbs (65.8 kg)
* Denotes half-space sensitivity.
200W RMS (40V)
500W PGM
990W PEAK
122 dB continuous
129 dB peak
Dual NL4 with dual ¼-inch jacks
in parallel
Eight M10 threaded rigging
fittings - three each on top and
bottom; two on rear
Black catalyzed polyester twopart paint
23.9 x 14.9 x 13. 4 inches
(607 x 378 x 340 mm)
200W RMS (40V)
500W PGM
990W PEAK
124 dB continuous
131 dB peak
Dual NL4 with dual ¼-inch jacks
in parallel
Ten M10 threaded rigging fittings
- four each on top and bottom;
two on rear
Black catalyzed polyester twopart paint
27.2 x 18.4 x 15.9 inches
(691 x 467 x 404 mm)
200W RMS (40V)
500W PGM
990W PEAK
123 dB continuous
130 dB peak
Dual NL4 with dual ¼-inch jacks
in parallel
Ten M10 threaded rigging fittings
- four each on top and bottom;
two on rear
Black catalyzed polyester twopart paint
29.3 x 17.4 x 15.4 inches
(744 x 442 x 391 mm)
200W RMS (40V)
500W PGM
990W PEAK
123 dB continuous
130 dB peak
Dual NL4 with dual ¼-inch jacks
in parallel
Ten M10 threaded rigging fittings
- four each on top and bottom;
two on rear
Black catalyzed polyester twopart paint
32.4 x 18.4 x 15.9 inches
(823 x 467 x 404 mm)
400W RMS (40V)
1000W PGM
1980W PEAK
120 dB continuous
127 dB peak
Dual NL4 with dual ¼-inch jacks in parallel Dual NL4 with dual ¼-inch jacks in parallel
Eight M10 threaded rigging fittings - four on each
end of enclosure
Black catalyzed polyester two-part paint Black catalyzed polyester two-part paint
18.4 x 37.4 x 20.4 inches
(467 x 950 x 518 mm)
Due to ongoing development, specifications are subject to change without notice.
600W RMS (49V)
1500W PGM
2970W PEAK
125 dB continuous
132 dB peak
Four M10 threaded rigging fittings - two on each
end of enclosure
21.4 x 44.4 x 24 inches
(544 x 1128 x 610 mm)
SS-Series
Performance with Style
Stylish and lightweight
Nylon padded loudspeaker covers Pole mount system
Integrated casters on the
S-218S subwoofer
High-impact sonic capability
Seat track kit
Rigging hardware
Load rated M10 fly points Ergo-Grip™ handles
333 East Fifth Street, Chester, PA USA 19013-4511
TEL: 1-610-876-3400 · 800-523-4934
www.communitypro.com
S-SERIESBR20090708
Loading...