Community R.5COAX66BT User Manual

Application Solutions

SPECIFICATIONS

Loudspeaker Type: 2-way, coaxial, weather-resistant, full-range

80 Hz to 18 kHz

Operating Range:

Sensitivity (1W/1m):

200W Nominal

Impedance:

Minimum Impedance: 15.9 Ohms @ 9.8 kHz

Nominal –6dB

Beamwidth:
Axial Q / DI: 15.2 / 11.8, 1.6 kHz to 12.5 kHz

Crossover Frequency: 2 kHz

Recommended Signal

Processing:

Drivers:

Driver Protection: DYNA-TECH protection circuitry

Input Connection: 12 foot (4m) SJOW #16-gauge cable

Controls:

Enclosure: Rotomolded LLDPE, light grey

Mounting/Rigging

Provisions:

Environmental

Performance:

Required Accessories: 24 dB/Oct high pass filter

Supplied Accessories:

Optional Accessories: PMB Series pole mount brackets

Dimensions—Height:

Width:
Depth:

Weight: 38.5 lbs (17.46 kg)

Shipping Weight: 47 lbs ( 21.3 kg)

NOTES:

1. Sensitivity: Free field pink noise measurement at 20 ft (6.1 m) at 50% power;
extrapolated to 1 meter and an input of 70 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

90 Hz to 13 kHz (±3.5 dB)
200 / 100 / 50 / 25 watt autoformer taps @ 70.7V

97 dB SPL (100 Hz to 13 kHz 1/3 octave bands)
96 dB SPL (250 Hz to 4 kHz speech range)

25 Ohms

60°H (+20° / -6°, 1.6 kHz to 12.5 kHz)
60°V (+20° / -3°, 1.6 kHz to 12.5 kHz)

80 Hz high pass filter

LF 1 x 12”
HF 1 x 1” exit titanium free, Ferrofluid-cooled

4 position autoformer TAP select switch
70V switchable taps @ 200W, 100W, 50W, 25W
100V switchable taps @ 200W, 100W, 50W

(5) 3/8-16 rigging points

3-layer WeatherStop™, light grey
(Zinc-rich epoxy dual-layer powder coated

Grille:

perforated steel grille, foam, woven poly mesh)
IEC529 IP54W rating with a minimum 5-degree

downward aiming angle

(1) Yoke bracket, light grey
(1) Aiming strap

16 inches (406.4 mm)
16 inches (406.4 mm)

15.94 inches (404.88 mm)

R.5COAX66T

2-WAY COAXIAL WEATHER-RESISTANT

FULL-RANGE 200W (70V/100V) LOUDSPEAKER

APPLICATIONS

• Convention centers

• Fill speaker for stadia, athletic fields, arenas and

race tracks

• Outdoor background music / paging systems

• Theme and amusement parks

• Fairgrounds, rodeos, air shows

• Malls, cruise ships, skating rinks

• Swimming pools

• Portable sound systems

FEATURES

• Weather-resistant, rotomolded UV enclosure

• Weather-treated drivers and crossovers

• Corrosion-resistant zinc-rich epoxy dual-layer

powder coated steel grille and yoke

• High fidelity

• High efficiency

• Integral mounting points

• High power passive crossover

• Factory-installed 200W, 70V autoformer

• Five-year product warranty / Fifteen-year enclosure

warranty

DESCRIPTION

The R.5COAX66T high fidelity, two-way, full-range
loudspeaker system is engineered to provide quality
full-range sound in a variety of outdoor and indoor
applications. Its wide range, smooth frequency
response and high efficiency ensure both high fidelity
music reproduction and superb projection of clear
intelligible speech with very low distortion. The
R.5COAX66T comes with a factory-installed 200W,
70V/100V autoformer. Five-year limited product
warranty; fifteen-year enclosure warranty.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA

610-876-3400 · Fax [phone] · [e-mail] · www.communitypro.com

W

W

W

R.5COAX66T

True to Specification

FULL-RANGE 200W (70V/100V) LOUDSPEAKER

FREQUENCY RESPONSE

Resol ution <500 Hz = 10 Hz, >500 Hz = 40 Hz, 1/8

120
110
100

90

dB SPL

80
70

10 100 1,000 10,000 100,000

Frequency in Hertz

BEAMWIDTH AXIAL Q

1000

HorizontalVertical

100

2-WAY COAXIAL WEATHER-RESISTANT

100

Degrees

10

100 1,000 10,000 100,000

DIMENSIONS

15.94"

(404.88mm)

SIDE VIE

Frequency in Hertz

16"

(406.4mm)

FRONT VIE

16"

(406.4mm)

REAR VIE

10

Q

1

100 1,000 10,000 100,000

Frequency in H ertz

R.5 YOKE

16.000" [406.4]

.197" [5]

10.197" [259]
(TYP)

2.000" [50.8]

1.000" [25.4]

16.394" [416.4]

4.625"

[117.48]

8.197" [208.2]

2.750" [69.85]

10.0” [254]

ARCHITECTURAL SPECIFICATIONS

The loudspeaker system shall be a two-way, full-range bass reflex desig n with a single cast 12" and one 1" exit HF driver
coaxially mounted on a 60° x 60° horn. Drivers shall be connected to an integral crossover with a crossover frequency of 2 kHz
and integral over-current protection circuitry. The cabinet shall be a roto-molded linear low density polyethylene enclosure
providing weather and UV resistance with a three-layer weather resistant grille. The steel gr ille shall be powder coated with a
proprietary zinc-rich epoxy dual-layer powder coating process in light grey to color match the enclosure. The system shall
have an IEC529 IP rating of IP54W with a minimum 5-degree do wnward aiming angle. The input connection shall be one
12' (4m) SJOW #16-gauge cable. The enclosure shall incorporate fi ve 3/8-16 rigging points for multiple mounting options. In
addition, the loudspeaker will be supplied with one zinc-rich epo xy dual-layer powder coated steel yoke bracket and one multi­tap autoformer for 70V and 100V inputs. The loudspeaker s ystem shall have an amplitude response of 90 Hz to 13 kHz (+/-

3.5dB), an input capacity of 200W (70V/100V), 97 dB Sensitivity at 1W/1m. The nominal dispersion shall be 60° H x 60° V from

1.6 kHz to 12.5 kHz. The dimensions of the enclosure are defined as 16" x 16" x 16" (HWD) at a weight of 38.5 lbs.

Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.

communitypro.com

R.5COAX66T [03MAY2010]

Innovative design. Legendary sound.