Community R.5COAX66 User Manual

Application Solutions
SPECIFICATIONS
Loudspeaker Type: 2-way, coaxial, weather-resistant, full-range
Operating Range:
Max Input Ratings:
Recommended Power
Amplifier:
80 Hz to 18 kHz 90 Hz to 12.5 kHz (±3.5 dB)
200W continuous, 500W program 40 volts RMS, 89 volts momentary peak
420W to 600W @ 8 ohms
R.5COAX66
2-WAY COAXIAL WEATHER-RESISTANT
FULL-RANGE LOUDSPEAKER
Sensitivity (1W/1m):
Maximum Output: 121 dB SPL / 128 dB SPL (peak)
Nominal Impedance: 8 ohms
Minimum Impedance: 4.2 ohms @ 9.9 kHz
Nominal –6dB
Beamwidth: Axial Q / DI: 15.2 / 11.8, 1.6 kHz to 12.5 kHz
Crossover Frequency: 2 kHz
Recommended Signal
Processing:
Drivers:
Driver Protection: DYNA-TECH protection circuitry Input Connection: 12 foot (4 m) SJOW #16 gauge
Controls: None
Enclosure: Rotomolded LLDPE, light grey
Mounting/Rigging
Provisions:
Environmental
Performance:
Required Accessories: 24 dB/Oct high pass filter
Supplied Accessories:
Optional Accessories: PMB Series pole mount brackets
Dimensions—Height:
Width: Depth:
Weight: 35 lbs (15.9 kg)
Shipping Weight: 42 lbs ( 19.1 kg)
NOTES:
1. Sensitivity: Free field pink noise measurement at 20 ft (6.1 m) at 50% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
98 dB SPL (100 Hz to 13 kHz 1/3 octave bands) 97 dB SPL (250 Hz to 4 kHz speech range)
60°H (+20° / -6°, 1.6 kHz to 12.5 kHz) 60°V (+20° / -3°, 1.6 kHz to 12.5 kHz)
60 Hz high pass filter
LF 1 x 12” HF 1 x 1” exit titanium free, Ferrofluid-cooled
(5) 3/8-16 rigging points
3-layer WeatherStop™, light grey (Zinc-rich epoxy dual-layer powder coated
Grille:
perforated steel grille, foam, woven poly mesh) IEC529 IP54W rating with a minimum 5-degree
downward aiming angle
(1) Yoke bracket, light grey (1) Aiming strap
16 inches (406.4 mm) 16 inches (406.4 mm)
15.94 inches (404.88 mm)
APPLICATIONS
Convention centers
Fill speaker for stadia, athletic fields, arenas and
race tracks
Outdoor background music / paging systems
Theme and amusement parks
Fairgrounds, rodeos, air shows
Malls, cruise ships, skating rinks
Portable sound systems
FEATURES
Weather-resistant, rotomolded UV enclosure
Weather-treated drivers and crossovers
Corrosion-resistant zinc-rich epoxy dual-layer
powder coated steel grille and yoke
High fidelity
High efficiency
Integral mounting points
High power passive crossover
Optional 200W, 70V autoformer
Five-year product warranty / Fifteen-year
enclosure warranty
DESCRIPTION
The R.5COAX66 high fidelity, two-way, full-range loudspeaker system is engineered to provide quality full-range sound in a variety of o utdoor and indoor applications. Its wide range, smooth frequency response and high efficiency ensure both high fidelity music reproduction and superb projection of clear intelligible speech with ver y low distortion. Five-year limited product warranty; fifteen-year enclosure warranty.
Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA
610-876-3400 · Fax 610-874-0190 · info@communitypro.com · www.communitypro.com
W
W
W
R.5COAX66
True to Specification
FREQUENCY RESPONSE IMPEDANCE
2-WAY COAXIAL WEATHER-RESISTANT
FULL-RANGE LOUDSPEAKER
Resolution <500 Hz = 10 Hz, > 500 Hz = 40 Hz, 1/ 8
120 110 100
90
dB SPL
80 70
10 100 1,000 10,000
Frequency in Hertz
40 32 24 16
Ohms
8 0
10 100 1,000 10,000
Min Z 50 Hz - 20000 Hz = 4.2 O hms
Frequency in Hertz
BEAMWIDTH AXIAL Q
1000
100
Degrees
10
100 1,000 10,000
HorizontalVertical
Frequency in Hertz
100
10
Q
1
100 1,000 10,000
Frequency in Hertz
DIMENSIONS
R.5 YOKE
15.94"
(404.88mm)
16"
(406.4mm)
16.000" [406.4]
.197" [5]
SIDE VIE
FRONT VIE
16"
(406.4mm)
REAR VIE
10.197" [259] (TYP)
2.000" [50.8]
1.000" [25.4]
16.394" [416.4]
4.625"
[117.48]
8.197" [208.2]
2.750" [69.85]
10.0” [254]
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a two-way, full-range bass reflex desig n with a single cast 12" and one 1" exit HF driver coaxially mounted on a 60° x 60° horn. Drivers shall be connected to an integral crossover with a crossover frequency of 2 kHz and integral over-current protection circuitry. The cabinet shall be a roto-molded linear low density polyethylene enclosure providing weather and UV resistance with a three-layer weather resistant grille. The steel gr ille shall be powder coated with a proprietary zinc-rich epoxy dual-layer powder coating process in light grey to color match the enclosure. The system shall have an IEC529 IP rating of IP54W with a minimum 5-degree do wnward aiming angle. The input connection shall be one 12' (4m) SJOW #16-gauge cable with stripped ends. The enclosure shall incorporate five 3/8-16 ri gging points for multiple mounting options. In addition, the loudspeaker will be supplied with one zinc-rich epoxy dual-layer powder coated steel yoke bracket. The system shall have an amplitude response of 90 Hz to 12.5 kHz (+/-3.5dB), input capabilit y of 40 V RMS, 98 dB Sensitivity at one meter and 2.83 V, 8 Ohm nominal impedance. The nominal dispersion shall be 60° H x 60° V from 1.6 kHz to
12.5 kHz. The dimensions of the enclosure are defined as 16" x 16" x 16" (HWD) at a weight of 35 lbs. (38.5 lbs for the optional 70V version).
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
communitypro.com
R.5COAX66 [30NOV2009]
Innovative design. Legendary sound.