Community R.5-94Z User Manual

R.5-94Z

Application Solutions

SPECIFICATIONS

Loudspeaker Type: 2-way, horn loaded coaxial, weather-resistant

Operating Range:

Max Input Ratings:

Recommended Power

Amplifier:

Sensitivity (1W/1m):

Maximum Output: 124 dB SPL / 131 dB SPL (peak)

Nominal Impedance: 8 ohms

Minimum Impedance: 4.2 ohms @ 9.7 kHz

Nominal –6dB

Beamwidth:
Axial Q / DI: 18.1 / 12.6, 1.6 kHz to 10 kHz

Crossover Frequency: 2 kHz

Recommended Signal

Processing:

Drivers:

Driver Protection: DYNA-TECH
Input Connection: 12 foot (4 m) SJOW #16 gauge

Controls: None

Enclosure: Rotomolded HDPE, light grey

Mounting/Rigging

Provisions:

Required Accessories: 24 dB/Oct high pass filter

Supplied Accessories:

Optional Accessories: Pole mount system

Dimensions—Height:

Width:
Depth:

Weight: 35 lbs (15.9 kg)

Shipping Weight: 40 lbs ( 18.14 kg)

NOTES:

1. Sensitivity: Free field pink noise measurement at 40 ft (12.2 m) at 60%
power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

85 Hz to 16 kHz
125 Hz to 10 kHz (±4 dB)

200W continuous, 500W program
40 volts RMS, 89 volts momentary peak

420W to 600W @ 8 ohms

101 dB SPL (125 Hz to 10 kHz 1/3 octave bands)
102 dB SPL (250 Hz to 4 kHz speech range)

90° H (+1° / -46°, 1.6 kHz to 12.5 kHz)
40° V (+16° / +1°, 1.6 kHz to 12.5 kHz)

90 Hz high pass filter

LF (1) 12” Ferrofluid-cooled
HF (1) 1” exit, titanium free, Ferrofluid-cooled

(5) 3/8-16 rigging points

3-layer WeatherStop™

Grille:

(Perforated steel, foam, stainless steel mesh)

(1) Stainless steel (304) yoke bracket
(1) Aiming strap

16 inches (406 mm)
16 inches (406 mm)
16 inches (406 mm)

2-WAY HORN LOADED WEATHER-RESISTANT

FULL-RANGE LOUDSPEAKER

APPLICATIONS

• Fill speaker for stadia, athletic fields, arenas and

race tracks

• Convention centers

• Outdoor background music / paging systems

• Theme and amusement parks

• Fairgrounds, rodeos, air shows

• Malls, cruise ships, skating rinks

• Swimming pools

• Portable sound systems

FEATURES

• Rotomolded, UV enclosure

• Pattern control down to 630 Hz

• High efficiency

• Integral mounting points

• High power passive crossover

• DYNA-TECH active protection circuitry

• Five-year product warranty / Fifteen-year

enclosure warranty

DESCRIPTION

The R.5-94Z two-way, full-range loudspeaker
system is engineered to provide quality full-range
sound projection in a variety of outdoor and indo or
applications. Its wide range, smooth frequency
response and high efficiency ensure both high
fidelity music reproduction and superb projection
of clear intelligible speech with very low distortion.
Five-year limited product warranty; fifteen-year
enclosure warranty.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA

610-876-3400 · Fax [phone] · [e-mail] · www.loudspeakers.net

R.5-94Z

True to Specification

2-WAY HORN LOADED WEATHER-RESISTANT

FULL-RANGE LOUDSPEAKER

FREQUENCY RESPONSE IMPEDANCE

Resolution <500 Hz = 10 Hz , >500 Hz = 40 Hz, 1/8 octave smoothin g

120
110
100

90

dB SPL

80
70

10 100 1,000 10,000 100,000

Frequency in Hertz

36
32
28
24
20
16

Ohms

12

8
4
0

10 100 1,000 10,000 100,000

Min Z 20 Hz - 20000 Hz = 4.2 Ohms @ 9670 Hz

Frequency in Hertz

BEAMWIDTH AXIAL Q

1000

100

Degrees

10

100 1,000 10,000 100,000

Horizontal Vertical

Frequency in Hertz

100

10

Q

1

100 1,000 10,000 100,000

Frequency in Hertz

DIMENSIONS

ARCHITECTURAL SPECIFICATIONS

The loudspeaker system shall be a horn-loaded, two-way, coaxial desi gn consisti ng of one 12" F errofluid-coo led driver and one
1" exit, titanium free, Ferrofluid-cooled compression driver mounted on a horn inside the cabinet. The drivers shall be
connected to a passive crossover network with a crossover frequency at 2 kHz with driver protection using DYNA-TECH active
protection circuitry. The cabinet shall be a rotomolded polyethylene enclosure providi ng weather and UV resistance with a
three-layer weather resistant grille. The input connection shall be one 12' (4m) SJOW #16 gauge cabl e with stripped ends.
The enclosure shall incorporate five 3/8-16 rigging points for multiple mounting options. In addition, the loudsp eaker will be
supplied with one stainless steel yoke bracket. The loudsp eaker system shall have an a mplitude response of 85 Hz to 16 kHz
(+/- 4 dB), an input capacity of 40V RMS, 102 dB SPL sensitivity @ 2.8 3V / 1 meter between 250 Hz to 4 kHz at a nominal 8
ohm impedance. The nominal dispersion sh all be 90º x 40º over a fre quenc y range of 1.6 kHz to 12.5 kHz. T he dimensio ns of
the enclosure are defined as 16" x 16" x 16" (HWD) at a weight of 35 lbs.

Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA

610-876-3400 · Fax [phone] · [e-mail] · www.loudspeakers.net

R.5-94Z [12-01-06]